Electrodes

Compare Tool

Select up to 3 products

All Products

Electrodes

1 - 32 of 252
Sort
View
Show
  • Inlab® Electrodes and Accessories

    Mettler Toledo

    Electrochemical sensors are used in a wide variety of applications. METTLER TOLEDO offers a similarly wide variety of select products to help you find the ideal solution for your precise application. Their range focuses on the correct combination of high-quality materials, tried-and-tested…

  • InLab® Maintenance-Free pH Sensors

    Mettler Toledo

    Always Ready Well-equipped for challenging tasks. The highly robust PEEK shaft in combination with the open junction makes the InLab Expert both resilient and easy to handle. Its solid reference electrolyte requires no refilling and is always ready for use. If highest performance is expected,…

  • ROSS® Sure-Flow® pH Electrodes

    Thermo Scientific Orion

    Ross® Sure-Flow Easy cleaning in waste-waters, food samples, colloids, soils and slurries Has optimum flow rate for high purity waters, drinking waters and buffers Produces fast, stable responses in samples that vary in temperature pH range is 0-14 over a temperature range of…

  • High Performance Ammonia Electrode

    Thermo Scientific Orion

    Designed to meet the demanding needs of drinking water and wastewater applications Accurate results down to 0.01 ppm Linear electrode response down to low detection limits Response time of 1 minute in sample concentrations of 1 ppm and higher New wastewater applications developed…

  • Fluoride Ion Electrode

    Thermo Scientific Orion

    4210F12 For determination of fluoride ion activity in concentrations from saturated to 10 -6 M (0.02 ppm) Method approved by ASTM for water, drinking water, wastewater and seawater brines and it is approved by EPA, Standard Methods and AOAC for feeds Range saturated to 0.02 ppm Requires…

  • InLab® pH Sensors for Specific Applications

    Mettler Toledo

    Accept the Challenge The measurement of solid or semi-solid samples is challenging and requires sensors that are robust, ensure proper electrolyte flow and are easy to clean. Sensors with these properties are often requested for food or cosmetic applications. A special membrane glass and…

  • Ion Selective Electrodes

    Oakton

    Oakton has a large selection of ion-selective electrodes (ISEs) to suit a wide variety of applications. Each electrode has a typical response time of 20 to 30 seconds but will vary with solution concentration. Oakton offers four electrode types: membrane, solid-state, gas sensing, and glass bulb.…

  • Combination Electrodes

    Sensorex

    Sealed Ag-AgCl Reference, Epoxy Epoxy plastic body incorporates glass electrode and sealed Ag-AgCl reference electrode in a single stem Range pH 0 to 14, 0° to 100°C Usable at pressures from 0 to 100 psig (690 kPa) Offered in choice of types, each with US Standard or…

  • pH Electrode Stand

    Thermo Scientific Orion

    Electrode holders and stands Electrode holders and stands permit one-handed operation of electrode movement Four-position holders allow simultaneous use of pH or ISE electrode and reference half cell Swing arm stand (0732H82) allows flexible movement of electrodes. Holder…

  • SenTix® pH Electrodes

    WTW

    SenTix®: Standard electrodes with gel and precision electrodes with liquid gel electrolyte for pH measurements in lab applications and in the field Maintenance-free gel reference system across the entire product life Quick repsonse time by good connection to the medium for electrodes…

  • ROSS® Ultra Refillable Glass Triode

    Thermo Scientific Orion

    pH and temperature measurement with one electrode Versatile with chemically compatible glass body, refillable with ROSS 3M KCL solution or a fill solution compatible to your sample type Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and…

  • Orion Ion Selective Electrodes (ISE)

    Thermo Scientific Orion

    Measurements using an ion selective electrode (ISE) are applicable in virtually every laboratory. ISEs can be used to measure ion concentrations in water, food, pharmaceuticals and biological samples. Ion selective electrodes can be used as endpoint indicators or to perform direct measurement and…

  • ROSS® Ultra Premium pH Electrodes

    Thermo Scientific Orion

    The Orion ROSS® pH electrode, which is recognized as the best pH electrode in the world for difficult samples, is now even better. The Orion ROSS® Ultra has twice the warranty and greater stability than its predecessor. It uses a unique reference system developed by Thermo Scientific that offers…

  • Orion™ pH Electrode Filling Solution

    Thermo Scientific Orion

    Use Thermo Scientific™ Orion™ pH Electrode Filling Solution with pH electrodes and reference electrodes. Packaged as five 2 oz. (5 x 60mL) bottles.

  • InLab® Conductivity Cells for Bench Meters

    Mettler Toledo

    Ions in Motion InLab 731: A 4-pole conductivity probe with integrated temperature sensor and attached cable. Ideal for general measurements in aqueous media. Nominal cell constant: 0.57/cm. InLab 731-2m: A 4-pole conductivity probe with integrated temperature sensor and attached…

  • InLab® pH Sensors for Small Volumes

    Mettler Toledo

    Nothing is Impossible The more precious or limited the sample, the greater the challenge to use it for analysis. The narrow sensor shaft of micro pH sensors fits in nearly every sample container and enables measurements of sample volumes down to the lower μL ranges. InLab Flex-Micro:…

  • pH Electrodes

    Ohaus

    Backed by our commitment to accurate and precise measurement, the OHAUS Starter Series of electrodes are designed to produce exact results time and time again. The Starter Series includes pH, reference, oxidation-reduction potential (ORP), conductivity

  • 3-in-1 Triode Probes

    Thermo Scientific Orion

    Orion Triode 3-in-1 Probe is a practical solution for field and plant use. The pH/Reference/ATC probes are all in one body. It's non-refillable, little or no maintenance required. You get portability and accuracy in one package.

  • InLab® pH Electrode S7 Connector Cables

    Mettler Toledo

    pH Electrode Connector Cables, compatible with Mettler Toledo pH meters.

  • Combination pH Electrodes

    Corning

    General Purpose pH Combination (4136L21) AgCl internal reference sealed by ion exchange barrier pH range 0-14 at temperatures from 0° to 100°C Replaceable junction Plastic body 13 mm diameter x 138 mm long. 4136L16 and L21 have removable bulb connector for easy…

  • Orion ROSS® 3-in-1 Triodes

    Thermo Scientific Orion

    pH and temperature measurement with one electrode Superior stability with high accuracy pH and temperature measurement Fast pH response even in samples at varying temperatures Compatible with Mettler-Toledo TM Five and Seven Series meters and others which accommodate NTC30 thermisters with…

  • InLab® Conductivity Cells for Portable Meters

    Mettler Toledo

    Everywhere you Measure InLab 738: A 4-pole conductivity probe with integrated temperature sensor and attached 1.8m cable. Recommended for general measurements in the field or factory. Nominal cell constant: 0.57/cm. InLab 738-10m: A 4-pole conductivity probe with integrated…

  • Standard Ag/AgCl pH electrodes

    Thermo Scientific Orion

    Ideal for all routine pH measurements. A large variety of quality electrodes for a wide range of applications. Includes specialty pH electrodes for unique or challenging pH measurements.

  • Solution Kits

    Oakton

    Be sure to select both the electrode and solution kit to complete your measurement system. Solution kits contain the solutions and accessories needed for calibration, sample preparation, and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data…

  • ORP Standard

    Thermo Scientific Orion

    Calibration solution (4153R53) does not contain hazardous chemicals, is stable for up to one year (unopened) and can be used directly from the bottle with no mixing or diluting.

  • Orion Redox / ORP / Temp Electrodes

    Thermo Scientific Orion

    The Orion 9179BNMD and Orion 9180BNMD consist of a platinum redox sensor, a silver/silver chloride internal reference systems and a built-in thermistor for Automatic Temperature Compensation (ATC). Both models have the capability to measure ORP and Temperature simultaneously without a separate…

  • Orion Economy Series pH Combination Electrode, 0 to 12 pH

    Thermo Scientific Orion

    Permanently gelled Ag/AgCl electrolyte 0 to 12 pH range 0° to 80°C (32° to 176°F) temperature range Wick junction 5.93 in. long (15cm) x 0.25 in. diameter (6mm) body, 0.18 in. diameter (10mm) cap BNC Connector A routine wick junction, gel-filled pH measurement…

  • Reference Electrodes For ISEs

    Thermo Scientific Orion

    4215F10 Mercury-free, Ag-AgCl type, with sleeve junction. Designed for use with Thermo Orion ion-selective electrodes as indicated in respective descriptions; usable also with glass electrodes for pH measurement. Range 10 to 100°C. Length 140 mm, diameter 13 mm. Diameter of mounting cap 16 mm. …

  • Replacement Electrodes and Probes

    Milwaukee Instruments

    Milwaukee has a wide assortment of pH, ORP, Conductivity and other specialty sensors to meet all your specific requirements. Finding the right electrode for a specific application is a very important task and in order to solve this selection problem it is important to consider the following:…

  • Orion Electrode Storage Bottle, 3 Pk

    Thermo Scientific Orion

    Storage bottle for protecting electrodes between uses. For use with Glass body 12mm electrode

  • General-Purpose pH Probe

    Oakton

    Oakton combination electrodes are available in a variety of styles to meet the needs of your application. Epoxy electrodes are impact resistant and provide exellent durability for field applications. Glass electrodes withstand aggressive chemicals. Choose junction and tip style based on the needs…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.