Our flat metal electrodes are 18mm by 100mm (approximately 0.75" by 4"). We carry electrodes made from seven different metals: aluminum, brass, copper, iron, zinc, nickel, and tin. Use them in your own experiments with electricity.   PRODUCT WARNINGS WARNING: …

Miniature LED yellow light bulb holder module for Genecon V3 The LED lamp can directly connect to Genecon V3 without any cables. Convenient in students’ experiments with energy consumption, comparison of lighting time between the miniature bulb and LED lamp using capacitor…

Helmholtz coils are useful for creating near-uniform magnetic fields or for cancelling out external magnetic fields, such as the earth’s. The field between the two solenoids is at its most uniform when the distance between them is equal to the radius of the solenoids. This can also be used with a…

Our Digital Ammeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different ammeters with different ranges of measurable amperages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known to…

A Wheatstone Bridge is a tool that can be used to determine an unknown electrical resistance within a circuit by comparing known resistances to the unknown resistance value. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene, nickel, and lead, which…

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18-gauge insulated wire. These connector cords have alligator-clips on each end. Alligator-clip ends are useful for useful…

An economical electroscope consisting of aluminum leaves mounted on a metal rod (item #4-50160) held by a rubber stopper in a 250ml flask. Instructions included. The rod assembly can be use as a replacement unit on 4-50150 or 4-50170. The rod assembly is an aluminum rod with an aluminum ball…

This 6" by 6" square of silk can be used to observe the relationship between friction and electricity. Sold individually.

A contact key is used for experiments which require momentary current. The contact key is used to open or close a circuit. The key is mounted on a 3” x 4.5” x 3” black base with two binding posts. The arm of the contact key is plated metal with an insulated button.

The Friction Rods are useful in a variety of electrostatic demonstrations. 603-1: Made of glass tubing and sealed on one end 603-2: Made for a solid glass rod and the edges of the glass are ground to a smooth finish 603-3: Made for a solid glass rod and the edges of the…

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.

A multimeter is a tool that is used to measure electrical properties such as current, voltage, resistance, and frequency. It is a very useful tool in a physics classroom studying electrical circuits. This is a digital multimeter with a 3.5 digit LCD display, 9 volt battery and instructions.…

The Van de Graff Generator is an electrostatic generator which uses a moving belt to accumulate electric charge on a hollow metal globe on the top of an insulated column, creating very high electric potentials of 250,000 volts. It produces very high voltage direct current (DC) electricity at low…

The connector cord set have Cross-Patch/Stacking Banana Plugs which allows you to connect to another Banana Plug on both the side or back of the first plug. The cords are plastic coated and flexible. The set includes 6 cords; 3 black and 3 red.

The meters are ideal for numerous electrical and laboratory experiments. Full scale and fully enclosed, with accuracy +/- 2.5%, and a 7.5 cm scale length. Color Coded. Supplied with binding posts and external zero-adjustment.

The connector cord set have Cross-Patch/Stacking Banana Plugs on one end and a Alligator Clip on the other end. The alligator clip has an insulated sleeve for safety and the cords are flexible and durable. The set includes 6 cords; 3 black and 3 red.

Knife switches are used to manipulate how electricity flows through a circuit. The base and the handle of the switch are insulated to allow for handling. Wires are connected to the screw-type binding posts. This knife switch is a double pole, double throw, single pole, double throw, single pole,…

Our Digital Voltmeters are simple, have an easy-to-read display, and run on a 9V battery. We sell several different voltmeters with different ranges of measurable voltages. PRODUCT WARNINGS WARNING: This product can expose you to chemicals including styrene and lead, which are known…

The unit is bigger than standard electroscopes for easy viewing. The leaf is larger and the wide radius of swing provides a visual and sensitive demonstration. The unit also features a built in scale which helps to determine the amount of charge generated. The metal case is strong and resistant to…

Upper limit of generated voltage is set at 3 volts in order to prevent unexpected breakage of accessory like a miniature incandescent bulb. Several kinds of dedicated adapters (miniature incandescent bulb, LED bulb) are available and will plug directly into the Genecon V3. The Generator is…

Contains Hollow Friction Rod, Solid Friction Rod, 1/2 Ground Friction Rod, Ebonite Rod, Wool Pad, Silk Pad, Faux Fur Pad, 3-Balloons and 10 feet of String. Instructions included.

Galvanometers measure very small amounts of current or voltage in a circuit. Our meters are accurate to +/- 2.5% and have banana jack style binding posts.

Miniature incandescent bulb holder module for Genecon V3 The lamp module can directly connect to Genecon V3 without any cables. Convenient for experiment with energy consumption and comparison of lighting time between the miniature bulb and LED The transparent body allows you to…

The Electromagnet Kit is used for teaching students the principals of an electromagnet. Everything that is needed is included in the kit, apart from the power supply. Included is a “U”-Shaped Iron Core with two coils of wire, a straight iron bar, two magnetic compasses, wire connector cords,…

The Two Potato Clock is a fun demonstration of the principles of an electrochemical cell. The blue plastic potato (fruit) clock has two compartments designed to hold potatoes or fruit. The coils, one red and one blue, are inserted into a different potato while the green coiled wire is connected to…

A simple and useful generator for experiments requiring up to 12 volts DC current. Housed in a tough plastic case with binding posts for electrical connections. Approximate size 6.5" x 2.5 x 4".

Connector cords are useful in various electricity experiments, as well as in many apparatuses that require connections to power supplies. All of our connector cords are made of 18 gauge insulated wire. These cords are 24" long and have alligator clips on each end. Sold as a pack of 6 cords, 3 red…

Explore "green energy" on a small scale. This solar car operates on sunlight or a rechargeable "AA" battery. A four-position switch allows you to choose between running the car on the solar cell or battery, recharging the battery from the solar cell, or "off". The car can also operate using a…

A model of an AC/DC motor that demonstrates permanent and electromagnet motors. All the parts are packed in a protective plastic case that is used as the base of the motor during assembly. Everything is included. Size approximately 6 x 4 x 1/5". Instructions included.

This kit allows students to build their own DC motor. Students will be able to use it to explore the topic of electromagnetism and how it functions inside a motor. Each kit includes a detailed guide and everything you need to build a simple DC Motor except for a battery.