This miniature DC motor is designed for experiments using low starting voltage (4.5V) and current (70mA). Speed: 1000-5000 RPM. Motor is approximately 34mm long x 24mm in diameter. Shaft size is 10mm long x 2mm in diameter. Includes soldered-on 7" lead with alligator clips.

This comprehensive kit allows students to plot equipotential lines in an electric field between two electrodes held at different electric potentials. A simple setup keeps electrodes partially immersed in water containing an electrolyte, allowing a small current to flow between the…

This motor generator demonstrates both shunt wound, and series wound connections for motors and generators, and can be used with AC or DC supplies. Motor is easily dismantled to change the configuration. Requires Low voltage AC/DC Power Supply (not included)

This versatile multimeter includes AC voltage, DC voltage, DC current, continuity, resistance, transistor and battery test modes. Features an easy-to-read 3.5” digital LCD display. Supplied with two 24 in. 18 gauge test leads. Requires one 9V battery (included).

This large van de Graaff generator uniquely offers alternative drive modes, either hand-cranked or motor driven. Excellently constructed, the generator reliably delivers charge and sparks 10cm long and more immediately on setting it in motion, even under high humidity conditions. In hand-cranked…

This kit includes an air core solenoid and a current balance for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. To run the experiment, one half of the current balance is placed inside the solenoid. The other half has an…

This unique hand generator is an easy yet effective way to teach how AC and DC electricity is produced. Banana plugs can be inserted into the different connectors to change from AC to DC electricity. The unit has a clear base for easy demonstration of connections. Includes an activity guide.

The 1660-point solderless breadboard is built with high-quality construction that can withstand repeated use. It includes color coordinates that are screen-printed for easy reference. This breadboard is perfect for investigating circuit designs and prototyping. It accepts most electronic components…

Friction Rods are 12"; long unless noted. Excellent for demonstrating static electricity

This ingenious device offers a practical and economical solution for light measurements in a variety of learning situations. Whether measuring environmental light or quantifying an optical experiment, this compact luxmeter meets the need. For most uses, the autoranging feature makes this a…

The Solar Kit offers a convenient introduction to the conversion of solar light energy into electrical energy. The conversion is carried out by a photoelectric panel, and three “consumers” are included to demonstrate the use of the electrical energy; an LED shows the conversion back to…

Solar motor is specifically designed for experiments using low starting voltage (0.5V) and current (25mA). Speed: 1000-5000 RPM. Motor is approximately 38mm long x 24mm in diameter. Shaft size is 8mm long x 2mm in diameter. Includes soldered-on 4" wire leads.

We offer a superior quality Wimshurst machine for demonstrating high voltage electric charges. Our unit features acrylic rotating disks, good quality foil strips and brushes, insulated cylindrical capacitors, and a durable plastic platform. Guaranteed to produce large sparks for easy…

Discover how people communicated over long distances before the telephone was invented. The Morse code experiment kit is designed to show the principle of a telegraph. The kit consists of a "D" cell battery holder, a telegraph key, a miniature lamp with holder, and three connector cords.…

Convenient, economical package of materials to start investigating electricity concepts. Assortment includes: 6 Round Plastic Bulb Holders, 3 Knife Switches, 6 Battery Holders with Fahnestock Clips, 10 Fahnestock Clips, 1 Wire Stripper, 3 Wires with Alligator Clips, 18"; Assorted Colors, 3 Wires…

Convenient fully assembled battery set holds up to 4 D-size batteries. Five color-coded binding posts on the base for easy, safe, and reliable connections to hook-up cords provide outlets for 1.5V, 3V, 4.5V or 6V supply voltages. Superior construction¡Xrobust, molded battery holders for secure…

Compact analog multimeter offers popular features such as AC voltage, DC voltage, DC current, Ohms, measures capacitance and decibels, and comes with overload protection and diode test. Includes test leads and instruction manual. Operates on 2 AA size batteries (included).

This apparatus helps students to observe energy transfer and conversion and investigate the systems that keep homes comfortable and safe. The suggested activities below will: explore the relationship between parallel circuits and current; understand how thermostats and circuit breakers operate; and…

Operates on 1.5V or 3V DC. Speed: 7000-11000 RPM. Motor is 40 MM long x 20Mm in diameter. Shaft size: 2 MM diameter x 8 MM long.

Flexible, 18swg stranded wire cord with alligator clips at both ends. Alligator clips have protective vinyl sheath.

This sturdy electroscope features a metal case with front and rear glass windows for preventing air currents from affecting the deflection of the leaves. Leaves are gold and aluminum. Leaf support rod is held in place by an insulating plastic sleeve. A graduated scale is also provided for measuring…

Build your own series circuit using the handy Create-A-Circuit-Kit. It comes complete with a "D" cell battery holder, a knife switch, two miniature light bulbs, two lamp holders, and four connector cords. Instructions are included.

Flexible, 18swg stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end. Alligator clip has a protective vinyl sheath.

Knife Switches for low voltage experiments (less than 36V) with plastic bases. These items are available with either thumbscrew or spring binding posts.

Plastic Battery holder available with Fahnestock Clips, wire leads, or fahnestock clips and jointers.

Friction pads are 12"; x 12";. For use with Friction Rods to demonstrate Static Electricity.

The classic method for demonstrating and measuring the small force experienced by a conductor carrying an electric current in a magnetic field. One half of the balance is placed inside a solenoid. The other half has an adjustable counterweight and can carry light additional masses. When current is…

This device can be used as a classic standard calorimeter or as an electric calorimeter. Made of aluminum and plastic, the calorimeter has a diameter of 10cm, height of 11cm, liquid capacity of 175ml, and a heat capacity of 25J/°C. Electrical requirements are 6V DC, up to 2A.

Demonstrate key electrostatics concepts with this kit. Contains everything necessary to construct two flask form elctroscopes. Detailed manual included experiments using two electroscopes for positive and negative charge studies, and a Faraday's Pail experiment. Kit includes 2 Glass Flasks, 2…

Well-constructed and attractive electric bell model mounted on a clear acrylic plate and a finished wooden stand. Functional parts are clearly seen. Operates on 6V d.c. with on/off switch, adjustable contact screw, and binding posts for easy connection.

Telegraph key, mounted on a solid plastic base, measuring 11cm x 5cm.

Fahnestock Clips supplied in packs of ten.