One-time installation procedure Can be configured to the individual user requirements Needle valves ensure gas line is not contaminated during cartridge change NOTE: Filters are not included.

The most widely used MS phase in gas chromatography Low polarity phase, 5% diphenyl/95% dimethyl polysiloxane Low bleed for excellent signal-to-noise ratio, sensitivity and mass spectral integrity Exceptional inertness ideal for analysis of active compounds Equivalent to USP G27…

Exceptionally low bleed for optimal signal-to-noise ratio, sensitivity and mass spec integrity Non-polar, 100% dimethyl polysiloxane Equivalent to USP G2 Applications: Hydrocarbons PCBs Drugs of abuse Gasoline range organics (GRO) Refinery gases …

Offers extended operation up to 400°C, ideal for high temperature extended GC applications Low polarity, 5% diphenyl/95% dimethyl polysiloxane Lower bleed and better inertness than comparable high-temperature columns Special design of fused silica tubing extends column lifetime…

Highly deactivated and produced to exacting tolerances to ensure a high degree of reproducibility

Exceptionally inert mid-polarity columns with selectivity and elution order optimized for difficult separations Polar phase, Trifluoropropylmethyl polysiloxane solid phase resolves compounds that phenyl and cyano phases cannot Outstanding thermal stability and low bleed Suitable for…

Super Clean Cartridge Filters 99.9999% pure gas (or 6.0 grade) output No carrier gas line contamination during cartridge change Cost effective TUEV approved Max. pressure 11 bar (160 psi) Max. flow 7L/min.

Analysis of ppm levels of amines without column priming Low polarity phase, 5% diphenyl/95% dimethyl polysiloxane Tubing surface is chemically altered to reduce tailing of active basic compounds Also allows analysis of neutral or weakly acidic compounds (e.g., phenols) and compounds…

Thermo Scientific* Uniguard Direct-Connection Guard Cartridge Holders are reusable, stainless-steel guard cartridge holders that attach directly to the analytical column inlet—eliminating requirement for extra fittings. With PEEK 0.0625 in. male outlet that fits many columns 0.0625…

Acidic functionality in the polymer structure allows analysis of acidic compounds without derivatization Polar phase, acid-deactivated polyethylene glycol Resists oxidative damage and adsorption of acids Excellent peak shapes for high MW acids Equivalent to USP G25, G35 phases …

Siltek coating provides a surface with exceptional inertness suitable for the analysis of highly active compounds Precision machined tp provide exceptional sealing properties Reduces activity (especially useful for analysis of pesticides, PCB's, phenols, etc.) High grade stainless steel…

Particularly suited to GCMS applications that require more polarity than a 5% Phenyl phase Mid-polarity phase of 50% diphenyl/50% dimethyl polysiloxane Ideal for confirmational analysis Excellent inertness for active compounds such as pesticides Very low bleed ideal for analysis by…

Thermo Scientific™ TRACE TR-5MS GC Columns feature a popular GCMS phase for many applications. Nonpolar phase, 5% phenyl polysilphenylene-siloxane Low bleed and high stability High signal-to-noise for increased sensitivity High robustness to oxygen and water contamination …

Syringes for use with autosamplers, injectors, and chromatography systems. Removable-needle, fixed-needle, and plunger-in-needle formats are available in multiple needle lengths, gauges, and point styles. Ideal for gas chromatography and HPLC applications.

The GFM Pro Flowmeter is specifically designed for use with gas chromatography (GC) instruments. This versatile product is an electronic device capable of measuring volumetric flow for all types of gases. Real-time measurements can be made for various types of flow paths including continually…

Wide range of choices for a wide range of instruments and applications Thermo Scientific ferrules are available in three different materials and various dimensions to match the instrument and capillary column ID. The choice of material is dependent upon the use. 15% Graphite/85% Vespel…

Use Thermo Scientific™ Acclaim™ Mixed-Mode WAX-1 Columns when powerful selectivity control for the separation of anionic molecules is necessary. The silica-based stationary phase features a hydrophobic alkyl chain with an ionizable terminus that provides both hydrophobic reversed-phase…

The Thermo Scientific liner sealing ring is suitable for use with TRACE 1300 series gas chromatograph models and Agilent SSL injector models. Match the best sealing ring with the injection port liner used in your Thermo Scientific™ or Agilent GC system

Offers 90+% resolution of the first six gases in EPA Method 8260 and EPA Method 524.2 for volatile organics analysis Low to mid-polarity phase, 6% cyanopropylphenyl/94% dimethyl polysiloxane Ideal for EPA methods 624 and 608 Allows resolution of 2-nitropropane from 1,1-dichloropropanone…

THOMAS CLEARANCE SALE! 50% OFF! Original Price: $502.93 CLEARANCE PRICE: $251.47*   Direct-connection, fingertight design for convenience and maximum efficiency Patented design requires no holder, allowing quick and easy replacement Features of Betasil…

Thermo Scientific™ TraceGOLD TG-5SilMS GC Columns incorporate phenyl groups in the polymer backbone for improved thermal stability, reduced bleed and reduced susceptibility to oxidation. Application: Gc/ms Applications Using Ion-Trap Systems, Polycyclic Aromatics, Hydrocarbons Including…

Manufactured for better column-to-column reproducibility Polar phase, polyethylene glycol Polar-deactivated surface tightly binds polymer for excellent thermal stability Resists oxidative damage, damage from strongly acidic or basic volatiles better than silicone solid phases …

Direct-connection, fingertight design for convenience and maximum efficiency Patented design requires no holder, allowing quick and easy replacement Features of Betasil Silica Solid Phase 100 Angstrom silica High surface area with high bonded phase coverage Thermo Scientific Betasil…

Easy-to-use format eliminates contamination Pure gas output 99.9999% or 6.0 grade No carrier gas line contamination during filter change Easy and fast replacement without the need for tools No risk of overtightening fittings Reuseable end fittings reduce cost of clean gas:…

A wide range to cover most applications Variety of materials and temperature limits for all applications For use in Thermo Scientific TRACE and Thermo Scientific FOCUS GCs and instruments from other manufacturers Contaminant-free in individual blister packs Temperature limit: 400°C

Thermo Scientific Hypersil GOLD C8 HPLC Columns are recommended for analytes with medium hydrophobicity or when a less hydrophobic phase is required to obtain optimum retention. Based on high purity silica, Hypersil GOLD is a state of the art family of columns designed to meet the challenges of…

Specifically designed polymer and surface treatment overcome traditional problems with high-polarity columns Highly polar phase, 90% biscyanopropyl/10% phenylcyanopropyl polysiloxane, not bonded Strong dipole moment and high selectivity for cis/trans compounds or compounds with…

Proprietary stationary phase Optimized dimensions for analysis of volatile organic pollutants Ideally suited for US EPA Methods 502.2, 524.2, 8021, and 8260 Similar to DB-VRX, Rtx-VRX Recommended for: Volatile organic pollutants Aromatics

The Thermo Scientific TraceGOLD™ TG-1701 MS GC column is suitable for gas chromatography-mass spectrometry analysis of alcohols, pesticides, oxygenates, PCB cogeners and aroclor mixes. Application: Alcohols, Pesticides, Oxygenates, Pcb Cogeners, Aroclor Mixes

TraceGOLD TG-5HT columns offer extened operation up to 400°C, ideal for high temperature GC applications. Features: Low polarity, 5% diphenyl/95% dimethyl polysiloxane Lower bleed and better inertness than comparable high-temperature columns Special design of fused silica tubing extends…

The Thermo Scientific™ TRACE™ TR-5 GC column is mainly used to separate different kinds of analytes by using gas chromatography and mass spectrometry. It is mainly used in research facilities and chemical laboratories. It can be used for reversed phase, cation exchange, anion exchange and ion…

Chemically altered tubing surface reduces tailing and eliminates the need for column priming Midpolarity phase, 35% diphenyl/65% dimethyl polysiloxane Developed for analysis of active basic compounds without derivatization Also allows analysis of neutral compounds and adsorptive…