Ace Glass Chromatography Columns
-
Drip tip for chemical type chromatography with 1:5 taper PTFE stopcock at bottom for controlling flow.
-
Simple absorption chromatography column for rapid preparative separations with moderate resolution. Allows separations of samples from 0.01 to 10.0g in 10-15 minutes. Column and reservoir, only, are Epoxy Coated. Reservoir connects between column and flow control adap-ter. Joints on column,…
-
Chromatographic Column, 1:5 PTFE Plug
Ace GlassChromatographic column with integral reservoir at top, and 2 mm bore 1:5 taper PTFE stopcock plug at bottom. Opening at top is either 24/40 outer joint or opening for #3 stopper. Available with or without porosity B (70-100micron), fritted disc sealed in.
-
Column, Chromatography
Ace GlassRugged columns with internally threaded ends to which a wide choice of upper and lower end pieces can be fitted using 5837, 5838, 5841, 5842, and 5843 fittings. Available in a variety of lengths and diameters. Some sizes available with epoxy coating for added protection against scratches.
-
Injection Reservoir Bulb
Ace GlassInjection reservoir bulb with Ace-Thred ends. 250mL to 3000mL sizes.
-
Distilling Column
Ace GlassVacuum jacketed and silvered with observation stripe. Also available unsilvered. With an enlarged bulb knockdown section that removes high boiling ends without choking. Length of packing section is 100 or 200mm, I.D. approximately 10mm. With indents to
-
Jacketed, adjustable bed chromatographic column used for recycling, ascending descending applications. Completely jacketed for better temperature uniformity with single bushing at each end allowing for quick and easy adjustment of the PTFE plunger. the 25-50 micron porous glass disc gives rapid…
-
Funnel, Addition
Ace GlassFor charging columns. The capacity is approximately 5 times the largest column volume. Size listed is Ace-thred designation which refers to I.D. of tubing above thread and corresponds to 5820 column dia- meter. Available in cylindrical or conical shapes.
-
Distilling Column, Plain
Ace GlassPlain type, 10mm I.D. with indents for supporting glass beads or other packing.
-
Chromatographic column with 2mm bore, 1:5 taper solid PTFE stopcock plug and porosity B (70 - 100 m) fritted disc sealed in at bottom and #15 Ace-Thred at top of column. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring and 5853-07…
-
Adapter, Bottom Drip
Ace GlassDrip tip for chemical type chromatography. I.D. of drip approximately 4 mm. Size listed is Ace-Thred designation which refers to I.D. of tubing above thread and corresponds to 5820 column diameter.
-
Adsorption Column
Ace GlassUsed in ASTM D1319-65T, a "test for hydrocarbon types in liquid petroleum products." Consists of a charger section with a capillary neck, a separator section, and an analyzer section. Upper joint spherical 28/12.
-
Adjusta-chrom, Column, Michel-Miller
Ace GlassA combination of the high performance, low pressure Michel-Miller Chromatography Line and Adjusta-Chrom Recycling Column. Top has adjustable fitting that allows for a bed height anywhere within 1 - 6" below thread. Plunger tip is all PTFE with a porosity C (25-50m) glass disc. Complete column…
-
Column Head
Ace GlassFor use with 5862 Chromatography Column.With #50 Ace-Thred center neck and/or two #15 Ace-Thred side necks and 4" or 6" flange at bottom, ground flat Use with 6517 Clamp.
-
Chromatographic column with #15 Ace-Thred at top and 2mm bore 1:5 taper solid PTFE stopcock plug at bottom. Column supplied with 7506-06 Nylon bushing and FETFE O-Ring. Complete item consists of column with bushing and O-Ring, and 5853-07 Tubing Connector for connecting 12.5 to 14mm O.D. tubing to column.