Columns

Compare Tool

Select up to 3 products

All Products

Columns

1 - 32 of 1101
Sort
View
Show
  • BDS-Hypersil-C18 5µm Columns

    Thermo Scientific

    Original Hypersil columns from the manufacturer Base deactivated with minimal residual silanol activity Exceptional reproducibility Economical, general purpose columns Thermo Scientific Hypersil BDS 5µm C18 Columns are a good choice for QA/QC labs as a robust general-purpose…

  • Columns

    Avantor - J.T.Baker®

    Baker Disposable, Pre-Packed Extraction Columns Polypropylene extraction columns prepacked with sorbent Packing is held between two 20 mm polyethylene frits Sorbent weight ranges from 100 to 1000 mg and column reservoir capacity is 1, 3 or 6 mL, as indicated in listings below Capacity can be…

  • DB-5ms

    Agilent Technologies

    Phenyl Arylene polymer virtually equivalent to a (5%-Phenyl)-methylpolysiloxane Non-polar Very low bleed, suitable for GC/MS Exhibits inertness to active compounds Temperature limits are -60° to 325°/350°C Improved signal-to-noise ration for increased sensitivity and mass…

  • SYNTHWARE Heavy Wall Design Chromatography Columns with Fritted Disc

    Kemtech America

    SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is carefully minimized to…

  • Rtx-1301 (G43) Columns (fused silica)

    Restek

    low- to midpolarity phase Many analysts feel the Rtx-1301 column has the best cyanosiloxane bonded stationary phase available, with no other column manufacturer providing lower bleed, longer lifetime, or better inertness. Our polymer is fully characterized to ensure long-term reproducibility,…

  • Supelclean™ ENVI-Carb™ SPE Tube

    MilliporeSigma

    General Description Graphitized Non-Porous Carbon Retention Mechanism: Reversed-phase Sample Matrix Compatibility: Aqueous solutions (drinking, ground, waste water) Surface area: 100m 2 /g; Particle Sz.:120/400 mesh Extreme affinity for organic polar and non-polar…

  • Flex-Column Economy Chromatography Columns

    Kimble

    Ideal for use with gel filtration, ion exchange, affinity and adsorption media Economical Easy to use Universal fittings and tubing connections Ideal for use with gel filtration, ion exchange, affinity and adsorption media. Polypropylene reservoirs and column outlets are permanently…

  • SampliQ QuEChERS Kits

    Agilent Technologies

    Extraction salts are pre-measured and provided in anhydrous packets, so you can conveniently add them after the acetonitrile and improve results Kits available with ceramic homogenizers to facilitate sample homogenization and to break up salt agglomerates more efficiently than shaking by hand;…

  • Kromasil® C18 HPLC Columns

    MilliporeSigma

    Legal Information: Kromasil is a registered trademark of EKA Chemicals AB

  • ZORBAX Eclipse XDB Columns

    Agilent Technologies

    Agilent ZORBAX Eclipse XDB columns – C18, C8, Phenyl and CN – provide four bonded phase choices for method development optimization. These columns provide good peak shape over a wide pH range (2-9) for additional method development flexibility with one family of columns. Eclipse XDB…

  • SYNTHWARE Heavy Wall Design Chromatography Columns

    Kemtech America

    SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with a PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Top Joint: ST 24/40. Column packing is supported by glass wool (not supplied). Note: since the chromatography column is…

  • SYNTHWARE Chromatography Columns with Reservoirs

    Kemtech America

    SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top standard taper outer joint. Designed for flash chromatography. Column packing is supported by glass wool (not supplied). Top Joint: ST 24/40 Note: since the…

  • Gravity Chromatography Columns

    Kimble

    Gravity chromatography column manufactured from medium wall tubing with PTFE stopcock and in-line reservoir for containing liquid buffer Standard Taper joint size 24/40 These columns may be used alone or in combination with 420575-2440 flow control adapter A coarse porosity glass frit…

  • Column, Cadmium, for Nitrate determination

    Hach

    Prepared column, for use with Lachat FIA Nitrate methods.

  • DB-5

    Agilent Technologies

    (5%-Phenyl)-methylpolysiloxane Non-polar General purpose column Wide range of applications Low bleed High temperature limit: -60° to 325/350°C* Bonded and cross-linked Solvent rinsable Wide range of column dimensions available Equivalent to USP…

  • Capillary Column Ferrules

    Agilent Technologies

    Capillary ferrules are packaged in dial packs which deliver one ferrule at a time, keeping the others clean and ready for use. The dial packaging has been tested to ensure no out gassing of contaminants, including phthalates. *These ferrules are recommended for use with Agilent GC/MS…

  • Cadmium Reduction Column

    Kimble

    This column features all borosilicate glass construction with an 85 mL reservoir The glass wool plug and PTFE tubing at the bottom of the column are held securely in place by a BEVEL-SEAL™ connection, facilitating easy cleaning and assembly PTFE BEVEL-SEAL™ stopcock connector is…

  • PYREX® Vigreux Distillation Column with Cap 75mm Standard Taper 14/10 Threaded

    Corning

    This Vigreux Distillation Column is a replacement part for the 6949M series of PYREX® microchemistry kits.

  • Acclaim™ Mixed Mode WCX-1 LC Columns

    Thermo Scientific

    Separate cationic molecules with powerful adjustable selectivity control using Thermo Scientific™ Acclaim™ Mixed-Mode WCX-1 LC columns. The silica-based stationary phase features a hydrophobic alkyl chain with a carboxyl terminus that provides both hydrophobic reversed-phase and weak…

  • Stabilwax Columns (fused silica)

    Restek

    polar phase; Crossbond polyethylene glycol Restek’s polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability, relative to competitive columns. Because of the increased stability produced by the bonding process, Stabilwax columns exhibit long column…

  • Graphite/Vespel® Ferrules

    SGE

    Your chromatography analysis does not end with the selection of the GC column. The combination of components selected for your instrument also make an important contribution to successful separations. Choose SGE technology to improve your chromatography.

  • Ultra Aqueous C18 Columns (USP L1)

    Restek

    Ultra HPLC Columns The Ultra line represents Restek’s broadest selection of stationary phases on a single silica support. Made of high-purity, type-B silica that minimizes activity and creates high-density bonding, these columns are designed for selective and reliable HPLC applications. …

  • Uniguard Direct-Connection Guard Cartridge Holders

    Thermo Scientific

    Thermo Scientific* Uniguard Direct-Connection Guard Cartridge Holders are reusable, stainless-steel guard cartridge holders that attach directly to the analytical column inlet—eliminating requirement for extra fittings. With PEEK 0.0625 in. male outlet that fits many columns 0.0625…

  • Flex-Column 1.5X100cm Pk3

    Kontes

    FLEX-COLUMNS® are economical and easy-to-use. Short columns are typically used for ion exchange chromatography, sample desalting and semi-disposable applications, while the long columns are ideally suited for gel filtration and adsorption chromatography. Constructed of polypropylene…

  • ACQUITY UPLC® BEH C18 Columns

    Waters

    As the premier column for method development, the 1.7 um ACQUITY UPLC BEH C18 sorbent provides you with the most universal column choice for UPLC separations. The trifunctionally bonded BEH particle gives you the widest usable pH range (pH 1-12), superior low pH stability, and ultra-low column…

  • SYNTHWARE Chromatography Columns with Reservoirs, Spherical Joints & Fritted…

    Kemtech America

    SYNTHWARE general purpose chromatography column with heavy wall design. Supplied with an integral reservoir, PTFE stopcock and a top spherical socket joint. With a coarse porosity fritted glass disc to support column packing. Designed for flash chromatography. The section below the disc is…

  • PRP-1 Reversed Phase HPLC Columns

    Hamilton

    Polymeric 100 Å columns for general reversed phase separations. pH stable from 1 to 13 Better sample recovery than silica-based columns (there are no silanol groups) Excellent durability (stable to any concentration of water or organic solvent)   Five particle…

  • SampliQ Florisil PR SPE Cartridges

    Agilent Technologies

    Generally used to retain polar analytes Solvent retention generally decreases as solvent becomes more polar A great option when more generally-used sorbents, such as C18, don’t perform specifically enough for your particular application SampliQ* Florisil PR is a selective…

  • Glass Columns with Fritted Disc

    Kimble

    Basic column used for many separations in adsorption and ion exchange chromatography. 40-60 micron porosity fritted disc is sealed in Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

  • Roc™ C8 HPLC Columns (USP L7)

    Restek

    Roc HPLC columns are built to be the cornerstone for your LC lab. These solid, reliable columns are pressure rated for any 400 bar HPLC system and deliver the peak shape, reproducibility, ruggedness, and performance you demand for all of your conventional HPLC applications. An exceptional value,…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.