United Scientific Supplies Lab Clamps, Stands & Supports
-
Universal Clamp with Holder
United Scientific SuppliesClamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.
-
3-Prong Heavy Duty Extension Clamp
United Scientific SuppliesThese extension clamps features heavy-duty electroplated zinc alloy construction, dual prong adjustments and addtional fiberglass sleeves. Clamps have a max temperature use of 80°C. CLHD01 - 4" long extension rod is constructed of stainless steel. Prongs open to about 1.75",…
-
Laboratory Jack
United Scientific SuppliesStrong, excellent quality laboratory support jack, made of aluminum and stainless steel. Vertical height to 26cm;15cm x 12cm top and base plates. Also available with removable 20cm x 20cm platform and a 45cm long support rod.
-
Cast Iron Support Stands with Rods
United Scientific SuppliesThese support stands feature a heavy cast iron base with black enamel finish. Each base includes a removable zinc plated rod.
-
Square Platform Laboratory Jack
United Scientific SuppliesLaboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro
-
Burner Stand
United Scientific SuppliesMade of steel wire, zinc plated. Stand has a heavy wire gauze top. Overall height is 5" to accommodate all sizes of burners. Available with or without a ceramic center on wire gauze top.
-
Buret Clamps
United Scientific SuppliesClamps are die casted from aluminum and feature black rubber sleeves for firm gripping of burettes. The adjustable clamps hold up to 30mm OD burettes which are held in place by the pressure created by the springs. For use with rods up to 19mm diameter.
-
Two-Way (High/Low) Burner Stand
United Scientific SuppliesThis stand is ideal for use with alcohol burners. The base is made from 3/16" stainless steel rod with a plated steel mesh top. The stand can be used in either high (5") or low (4") position.
-
A-Base and Rod
United Scientific SuppliesThe A-shaped base is made of rugged cast iron for extra stability. It has 22cm long legs and features a baked on black chemical resistant finish. The rod is zinc plated steel, 61cm long and 12mm in diameter.
-
CLAMP WITH HOOK
United Scientific SuppliesClamp with Hook can be rotated and locked in any position. Ideal for supporting suspended thermometers, drying tubes, etc. The clamp attaches to rods up to 13mm (1/2") O.D.
-
THERMOMETER CLAMP
United Scientific SuppliesThermometer Clamp features adjustable 360° rotating jaw for suspending thermometers. The clamp attaches to rods up to 13mm (1/2") O.D.
-
FUNNEL HOLDER, DOUBLE, PP, PK/6
United Scientific SuppliesSuspend two funnels simultaneously using this polypropylene holder. These corrosion-resistant holders can be used with 3" to 6" diameter funnels, and include an extra plate to accommodate 1" to 3" diameter funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 1/2" or 3/8" diameter.
-
Round Bottom Flask Stand
United Scientific SuppliesMolded in Polypropylene, this flask stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of contact. This flask stand can hold round bottom flasks up to 10,000ml capacity. This stackable flask stand can also be autoclaved.
-
Clamp Holders
United Scientific SuppliesClamp holders for rods up to 19mm (0.75") in diameter. Available in Cast Iron or Brass.
-
Clamp Holder, Right Angle
United Scientific SuppliesCast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.
-
Screw Compressor Tubing Clamps
United Scientific SuppliesScrew Compressor Clamps are made fo steel wire and nickel plated. Opens to either 3/4" or 1" and is available as a “closed” or “open” type.
-
Test Tube Clamps
United Scientific SuppliesTest tube clamp for all sizes of test tubes. Available with and without finger grips in both Brass Wire and Steel wire with a brass finish. Note: Wooden test tube holder can accommodate test tubes from 12mm to 25mm in diameter.
-
Deluxe Support Stands
United Scientific SuppliesCast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the…
-
Triangular Supports with Rods
United Scientific SuppliesHeavy cast iron triangular bases with black enamel finish include a zinc plated steel rod.
-
Test Tube Clamp
United Scientific SuppliesSelf closing brass test tube clamp with finger grips and without finger grips
-
-
Extension Clamps
United Scientific Supplies3 pronged extension clamp is 10" long and has rubber tubing covering the prongs Extention Clamp with cork covered jaws, 8" total length 3 Pronged clamp with aluminum rod, 10" long
-
Lattice Lab System, Set #1
United Scientific SuppliesThe Lattice Lab System is a lightweight flexible set of support rods and clamps that allows a wide range of lab apparatus to be assembled and securely supported. Assembly is easy and requires only a screwdriver. Support rods are made of hard aluminum and foot plates and hook connectors are made of…
-
Plastic Support Stands
United Scientific SuppliesThese non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.
-
DELUXE METALWARE KIT
United Scientific SuppliesThis deluxe set includes a support stand (5” x 8”) with support rod (20”), support ring (3”), a 2-prong extension clamp with cork lined jaws and a clamp holder. The support rod includes a 3” long rod to provide more torque when securing the rod to the base plate.
-
United Scientific™ 3-Prong Clamp With Flexible Extension Rod
United Scientific SuppliesThis flexible arm is extremely versatile and can be placed in virtually any position or angle. Includes a 3-Prong Clamp Head, nickel-plated flex arm in 305 mm (12") length. The Lab-Frame Connector securely attaches to support stands, lab-frames; or any support rod up to 19 mm (0.75") diameter.
-
Tripod Stand
United Scientific SuppliesCast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable.
-
2 Prong Cork, PVC, and Silicone Lined Buret Clamp
United Scientific SuppliesOur deluxe line of two prong burette clamps are made of pressure die casted zinc alloy and are chrome plated. Adjustable to hold up to 60mm OD burettes, these clamps feature double keyed spring type adjustments. Available with an extension rod 8 ¼" (22cm) long, 5/16" (0.8cm) OD, with an overall…
-
Support Stands with Rod and Rings Sets
United Scientific SuppliesEach set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.
-
Cast Iron Tripod Stands
United Scientific SuppliesCast iron ring with black enamel finish. Detachable zinc plated legs. Legs are interchangeable, features removeable rings with 3.5", 4.75", 6.5" Ring O.D., 9" Height.
-
Hook Collar Clamps
United Scientific SuppliesHook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".
-
Porcelain Support Stands with Rods
United Scientific SuppliesHeavy porcelain bases with glazed finish to prevent chemicals from seeping into the base. Base includes rubber feet to ensure the base does not slide or damage bench surface. Hole for rod is located in the center of the base. Includes a removable aluminum support rod. Stainless steel support rod is…