Troemner

Clamps/Supports, Troemner

Compare Tool

Select up to 3 products

All Products

Troemner Clamps/Supports

1 - 32 of 50
Sort
View
Show
  • Talboys Inoculating Turntable

    Troemner

    Inoculating Turntables Talboys hand-operated inoculating turntables produce almost concentric circles of bacterial colonies that are evenly distributed across petri dishes. Cast iron turntables are coated with gray baked acrylic enamel. The 76mm (3") high, small turntable accommodates 100mm…

  • 3-Prong Multi-Purpose Clamps

    Troemner

    Large grip adjustment range 3-prong construction Single or dual adjust Nickel-plated zinc Designed to securely hold every type of laboratory glassware and apparatus. Long, seamless nickle-plated brass tubing attaches clamp head securely and offers easy positioning in the deepest…

  • Talboys Staining Rack

    Troemner

    Slide Staining Rack Constructed of stainless steel, the Talboys Slide Staining Rack will resist corrosion under normal use. Adjustable to fit trays or sinks up to 533mm (21") inside.

  • Labjaws Connectors

    Troemner

    Regular Clamp Holder (2824C83) Regular clamp holders are used to hold extension clamps to lab frames where 90° positioning is required. Strong enough to be used as a lab frame rod connector. Streamlined design for easier cleaning and tightening. Maximum grip is 16 mm diameter. Jumbo…

  • Stainless Steel Erlenmeyer Flask Clamps

    Troemner

    Designed to hold Erlenmeyer flasks Constructed of type 302 and 304 stainless steel Includes hardware for easy attachment to platforms Flask clamps are supplied with a spring to hold flask in place (except 25mL size)

  • Labjaws Two-Prong Extension Clamps

    Troemner

    Twin curved pads Single and double adjust Durable, heavy adjust model has one jaw fixed. Ideal for holding straight-sided objects such as burets, thermometers, beakers, etc. Nickel plated finish springs and rivets for long life. Additional clamp holder (2824C83) is required. Extension…

  • Labjaws Frame Kits

    Troemner

    Perfect starter kits Pre-packaged frame kits Six sizes to choose from Hard tempered aluminum frame rods Easy to build on All LabJaws Frame kits come pre-packaged with aluminum frame rods, frame connectors and frame feet. See chart below for specific quantities. …

  • Labjaws Double Buret Clamp

    Troemner

    Holds two burets from micro to 100 mL size. Finger grip adjusters allow easy buret placement. Side grip on buret leaves graduations unobstructed. Rigid hook connector to support rod. Stand has 34 cm x 18 cm white porcelain glazed base. With 60 cm high aluminum rod.

  • Swivel Clamps

    Troemner

    Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…

  • Talboys™ UltraJaws Heavy-Duty Clamps

    Troemner

    Talboys patented multi-purpose UltraJaws Heavy-Duty Clamps feature an innovative closed yoke construction that minimizes contamination and corrosion of internal components. The unique design enables secure gripping and positioning with added strength and durability. Available in both single…

  • Ultra Flex Support System With Lab Frame Connector

    Troemner

    Mounts to lab-frames or support stands Suitable for use in fume hoods 3 types of clamp heads Support system securely attaches to support stands, lab-frames, or any support rod up to 0.75” (1.9 cm) in diameter.  Ultra Flex clamping system is extremely versatile. Flexible…

  • Chain Clamps

    Troemner

    Holds large round or irregular shaped objects firmly, yet gently to lab-frames and rods. Quick and secure slip-on chain connection with large, easy-to-turn adjusting knob. Extension arm allows user to vary distance from the frame. Available as stainless steel clamp constructed entirely of stainless…

  • Fixed-Position Clamps

    Troemner

    Used to hold apparatus near the lab-frame where no adjustment is required after set-up. Built-in holder grips rods up to 19mm (0.75") in diameter Fixed-Position Clamps have an integral holder but can be rotated after attachment to a lab-frame or other apparatus. Available in 2-prong or…

  • Porcelain Buret Clamp Stand

    Troemner

    White porcelain base Dimensions are 178 x 330 x 25mm Supports 60 cm high aluminum rod Stainless steel electro-polished finish or nickel-plated zinc Double Buret Clamp holds any size buret from micro to 100mL capacity. Simply compress the scissor-like mechanism, insert buret and gently…

  • Labjaws Connectors and Mounting Brackets

    Troemner

    Rod End Connector (2824E29) Holds rods firmly at 90°. Use when semi-permanent installations are required. Comes with two set screws and is precision bored for close fit. S-Connector (2824E33) Clamps lab frame rods at 90° angle. Twin angled screws allow independent rod…

  • Labjaws Round Flask Clamps

    Troemner

    Stainless steel worm-drive screw clamps have large, flat thumbscrews for fast and easy adjustment. Four sizes to accommodate 64 to 165 mm diameter apparatus.

  • Labjaws Small Water Bath Clamps

    Troemner

    Suspends 6 to 13 mm thermometers over water bath. C clamp holder fits bath walls up to 9 mm thick. Overall length is 64 mm.

  • Ultra Flex Support System With Bench Clamp

    Troemner

    Easily attaches top most lab benches Frees up bench space Flexible support arm Support system easily attaches to the side of your lab bench or counter top, which helps utilize more space in your lab. Ultra Flex clamping system is extremely versatile and features a flexible arm that…

  • Sleeve 2 Prong Vin

    Troemner

    Sleeves are easily removed for cleaning or replacement. Both vinyl and fiberglass sleeves are available. Fiberglass sleeves are recommended for all applications above 100°C (212°F).

  • Labjaws Large Water Bath Clamp

    Troemner

    Three prong double adjustable clamp holds a variety of items up to 33 mm diameter. Overall length is 6.4 cm. Angled thumbscrews allow easy prong alignment. Clamp holder fits 5-9 mm bath walls.

  • Talboys Airejector

    Troemner

    Airejector Rapid air removal evacuates 1 liter of air to 711mm (28") of vacuum in 30 seconds. Works with compressed air sources to 60 psi. Nickel-plated construction.

  • Labjaws Nester Extension Clamp

    Troemner

    Firmly grasps glass distillation columns of varying sizes and odd-shaped glassware Constructed of stainless steel with strong, chromed-brass band and chain Offers a 152mm (5.98") long extension arm The flat thumbscrew/worm-drive design permits maximum tightening and quick removal

  • Cylinder Stand, Model 704, Adjustable

    Troemner

    Model 704 Adjustable Stand Heavy-duty, cast aluminum stand with adjustable "L" brackets hold cylinders from 6 to 9.25" (152 to 235mm) in diameter. Hinges open for installation without lifting the cylinder or disturbing connections. Prevents accidental tipping. Hinges open for easy,…

  • Labjaws Flow Control Devices

    Troemner

    Talboys' flow control devices offer selection and quality. They are finely machined to deliver accurate regulation or interruption of fluid flow. Every flow control device resists corrosion and rust. Hosecocks offer easy one-hand operation. Convex bearing surfaces and rounded edges protect…

  • Wall Clamp

    Troemner

    Self tapping screw clamp secures small object to wall when no frames are available. 58 mm long with jaws adjustable from 5 to 10 mm. Wing nut clamp holds thermometer or other small glass apparatus.

  • Open Rings

    Troemner

    Lightweight rings mount funnels, boiling flasks, and other irregular shaped objects to lab-frames. Open ring section allows items to pass in and out of support area easily, reducing risk of breakage. Aluminum construction.

  • Ultra Flex Support System With Base Plate

    Troemner

    Stable base plate Flexible support arm 3 types of clamp heads Support system is designed with a stable base plate that fits easily on bench tops or in fume hoods. The system includes three interchangeable clamp heads that make it very versatile: 2-prong clamp head, 3-prong clamp head…

  • Labjaws Thermometer Swivel Clamp

    Troemner

    Holds glass tubes or thermometers from 6 to 13 mm diamter. Swivel lock adjusts from any angle through 360°. Distance from thermometer to support rod in 99 mm. Overall length is 122 mm. Integral post holders for easy connections.

  • Heavy-Duty Tapered Clamps

    Troemner

    Heavy-Duty, 4-prong, dual adjust tapered clamps are designed to hold large vessels with ground glass joint necks. Clamps are constructed with extension rods for easy attachment to lab-frames and other apparatus. Nickel-plated zinc construction. NOTE: An additional holder must be purchased in…

  • Labjaws Thermometer Extension Clamp

    Troemner

    Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

  • Talboys Ultra Clamps

    Troemner

    Strong Aluminum Alloy Fitted with Over-sized knobs Rods supported on 4 inch long surface to avoid vibration and wobble

  • Strap Gas Cylinder

    Troemner

    Replacement safety strap. The 1" (25mm) wide, 54" (1372mm) long nylon strap features a nickel-plated, non-slip spring catcgh and buckle for easy adjustment around cylinders from 4 to 14" (102 to 356mm) in diameter. Models 711 and 7160 Bench Clamps and Models 715 and 717 Wall Brackets…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.