Harvard Apparatus

Compare Tool

Select up to 3 products

1 - 19 of 19
Sort
View
Show
  • Stronghold Support Glassware Buret Clamps

    Harvard Apparatus

    8847T32 single buret clamp is of glass-filled nylon with two small nylon clamps which are mounted vertically 4” (100 mm) apart to hold firmly in two places. Jaws open to 5/8” (16 mm). Clamp mounts into either closed connector, open-sided connector, ‘T’ connector; clamps do…

  • Stronghold Support Hinged Adapters

    Harvard Apparatus

    Made of glass-filled nylon Male connector and female socket have tab ends that carry a stainless steel bolt and star nut, allowing them to be locked in place in any position from in-line to 90° in either direction Hinged end can be located and locked anywhere within a full hemisphere …

  • Clamp, Lattice

    Harvard Apparatus

    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod

  • Connector, Closed

    Harvard Apparatus

    Of glass-filled Nylon with stainless steel thumbscrew shafts For connecting two rods up to 1/2 inch (13 mm) diameter at right angles or parallel to one another Can be positioned anywhere along length of rod Rods held in place by separate thumbscrews Two of these connectors…

  • Stronghold Lattice Frame Mounting Kits, 78 X 39 (2000 mm X 1000 Mm)

    Harvard Apparatus

    8846F10 Bench Mounting Kit includes 6 rods, 20” long, 7 rods, 39” long, 3 rods, 78” long, 24 lattice clamps, 6 lattice mounts, 3 tee connectors, 3 male/female hinged adapters, 3 large connectors, 360° and 1 Allen wrench 8846F12 Deluxe Bench Mounting Kit includes 3 rods,…

  • Stronghold Support Glass-Filled Nylon Jaw Clamps

    Harvard Apparatus

    Small clamps have fixed screw action and open to 5/8” (16 mm), for thermometers, burets, rods, etc. Jaws close down to completely shut. 8847T02 clamp has extension stem 5” x 1/4” diameter (125 mm x 6.4 mm); 8847T04 Clamp has male connector; 8847T06 has ball joint adapter. Medium…

  • Lab Lattice Base

    Harvard Apparatus

      Of glass-filled Nylon 2 1/2-inch-diameter base has three recessed screw holes for mounting on floor, top, etc. Female socket takes rod up to 1/2 inch (13 mm) and mounts it at right angles to surface Without rod; rod locked in place by thumbscrew.

  • Stronghold Scaffold Frame Kits

    Harvard Apparatus

    For mounting apparatus on the laboratory table, wall or floor Provide a basic lattice structure with individual lattices approximately 500 x 300 mm Kits consist of various lengths of stainless steel rods (13 mm diameter), glass-filled Nylon connectors, stainless steel socket screws and one…

  • Connector, T-Type

    Harvard Apparatus

    Made of glass-filled nylon For mounting clamps and adapters that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep…

  • Lattice Mount

    Harvard Apparatus

    Of glass-filled nylon For mounting a lattice rod parallel to a surface: to floor, shelf, wall, etc. Open-sided connector has base with two countersunk screw holes Takes any rod up to 1/2” (13 mm) Rod is held in place by thumbscrew; without rod

  • Suction Base

    Harvard Apparatus

    Made of glass-filled nylon Suction vacuum is created by an easy-to-grip, crescent-shaped lever which is pressed down into its recess in the base Has centered female socket to take rods up to 1/2” (13 mm) diameter Rod is locked in position by thumbscrew (included) Base…

  • Square Section Work Holder

    Harvard Apparatus

    Of glass-filled Nylon Combination vise and rod clamp for securing rectangular objects to support rod Alternately, can be used to support a rod vertically on water bath wall or in-line with top Takes objects up to 3/4” (19 mm) thick and has thumbscrew with cushioned tip to…

  • Stronghold Support 360 Rotation Connectors

    Harvard Apparatus

    8847E35 Connector of glass-filled Nylon Plate, 2 3/8 inches (61 mm) diameter, has threaded, stainless steel shaft Toothed surface caps fit against each side of plate and star nuts force toothed surface of caps against meshing surface of plate A rod or extension clamp stem passes…

  • Connector, Open-Sided

    Harvard Apparatus

    Of glass-filled Nylon with stainless steel thumbscrew shafts Holds rods or clamp stems up to 1/2” (13 mm) diameter at right angles to each other Open-sided; can be removed without disturbing support Includes two thumbscrews and 1/2” (12 mm) swivel adapter. Without rods.

  • Support Base, Weighted

    Harvard Apparatus

    Of glass-filled nylon, resistant to chemicals, particularly salt solutions and most solvents With extra resin-bond shot ballast and four large Neoprene feet Rectangular, size 6” x 9” (156 x 230 mm), with four sockets to take rods up to 1/2” (13 mm) diameter Rods…

  • Stronghold Support Triangles, Stainless Steel

    Harvard Apparatus

    Rods, 6.4 mm diameter, shaped into triangular support at one end for use with spherical or conical apparatus

  • Connector, End-to-End

    Harvard Apparatus

    Of glass-filled Nylon with stainless steel thumbscrew shafts For joining rods of the same or varying diameters, end to end Takes rods up to 1/2” (13 mm) diameter Center barrier within connector prevents rods from touching Each rod held by separate thumbscrew …

  • Stronghold Weighted V-Type Supports

    Harvard Apparatus

    Of glass-filled nylon, resistant to chemicals, particularly salt solutions and most solvents With resin-bonded ballast Neoprene feet With one socket which takes rod up to 1/2” (13 mm) diameter Rod is held in place by thumbscrew; hole for the rod goes completely through the base…

  • Support Base, Rectangular

    Harvard Apparatus

    Made of glass-filled nylon, with resin-bonded ballast and Neoprene feet Rectangular, size 6 x 9 in. (156 x 230 mm), with four sockets to take rods up to 13 mm diameter Each rod is held in place by thumbscrews (2 included). Indentations permit stacking of two bases to provide extra…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.