Wide adjustment range Autoclavable Stainless steel Polished finish Dual Adjustable Clamps are durable, multi-purpose clamps constructed of stainless steel and offer excellent chemical resistance and overall strength. The versatile 3-prong design secures a variety of lab apparatus…

Highly versatile, the rod height can be locked into any position by a simple thumbscrew located on the outer edge of the clamp. The clamp features a sturdy handle for tightening the unit on the edge of a table top up to 1-1/2" (38mm) thick. The plated, solid steel rod is 1/2" (13mm) in diameter by…

Borosil® Heavy Duty Retort Base is made with superior heavy steel alloy stand with lead-free powder coating. Heavy Duty base is with rubber linning that give extra stabilty and has Hole in the center for Steel Rod. Available in sizes of 6" x 4", 8" x 5" and 10"…

Used to hold apparatus near the lab-frame. Unlike extension clamps, the swivel clamps have an integral holder for attaching to a lab-frame or other apparatus. Built-in holder grips rods up to 19mm (0.75") in diameter and is adjustable for forward or reverse-facing adjustment screws. Shaft…

Fitting on 5/8" (16mm) support rods or smaller, this stamped steel clamp is plated for corrosion resistance and has a steel thumbscrew. The clamp is 9" (229mm)long by 3" (76mm) wide with a center distance 7-1/4" (184mm) between burettes. The unit is designed for use with burettes from 6mm to 16mm…

Cast aluminum clamp holder for use with rods up to 19mm in diameter. For use when clamping at 90° is required. This clamp features a min to max grip range of 0-21mm and a v-grove bearing length of 55mm.

Aluminum plate supports beakers, mantles and petri dishes. Fits standard lab-frames using connectors or holders.

The Simethicone Multi SUREGRIP™ Clamp is manufactured to meet the U.S. Pharmacopoeia Standard and holds up to 3" diameter containers. Additionally, the Simethicone Multi Clamps can be used to shake larger vessels that Finger SUREGRIP™ Clamps cannot handle.

Thomas No. 1227W29 Small stand for T 10 basic. Diameter of support rod: 10 mm Dimensions: (W x D) 242 x 355 mm Height: 370 mm Max. load: 0.7 kg Thomas No. 1203D30 With slip resistant foil. Max. load: 5 kg Dimensions: (W x D): 200 x 316 mm Height: 560 mm Thomas No.…

Reversible; can also be stacked upon each other. Three sizes provide six different diameters for round-bottom flasks ranging from 50 to 6,000 mL. Excellent adhesion to glass prevents slippage and also offers thermal and electrical insulation. Available in two rubber types.

Stainless Steel Quick Release clamp for use with two-piece Pressure Reaction Flasks and Heads with Duran flanges. Available with or without rod for clamping to support frame. Note: Ensure proper bottom support for your reactor, the clamp is only recommended for stabilization, not support.

Hook Collar clamps are ideal for suspending pulleys, balances, etc from support rods or cross members. Available for rods up to 0.5" or 0.75".

Floor style stainless steel support stand made to accept 12 and 22 Liter CG-1539 half jacketed flasks. Stand is 67in overall height with a depth of 22in. Ring has a diameter of 8 1/2in I.D. and is 28in above floor level. Top of stand has a 39in reinforced riser to support overhead stirrers, clamps etc.

HIGH QUALITY Made of high quality stainless steel STABILITY Provides superb stability for experiments & setups THREADED Threaded end (10 x 1.5mm) fits in all Eisco bases GREAT FOR CLASSROOM & HOME LABORATORIES The durable and sturdy construction of this set makes it an…

These non corrosive molded support stands provide excellent alternatives to metal ones. Even the metallic rod has a polypropylene covering making it non corrosive. Each support base comes with a 0.5" diameter 30" long rod.

CLAMPS, BURET, Clamp will hold two burets from micro to 100mL. Spring loaded mechanism adjusts simply by squeezing, yet hold buret firmly in place. Mounts directly to standard support rod with built in hook connector. Constructed of epoxy coated aluminum with vinyl jaws. CHEMGLASS LAB CLAMPS,…

The Humboldt Funnel Support is designed to accept up to four funnels. The unit consists of a hard wood support with four slotted holes and a metal clamp with thumbscrew for support rod mounting.

Expand your options in the laboratory Even distribution rods for maximum capacity of items Extended polypropylene base allows for extra items to be added Rigid, solid aluminum rods provide extra support for small lightweight items such as glassware as well as heavy items such as…

1/2" diameter rod can swing in one plane 22 1/2 degrees in each direction.

Heavy-Duty Support Stands have a four point cast iron base with stainless steel support rod. They are designed to accommodate vessels up to 12" (30.5 cm) in diameter to sit close to the support rod. They have rubber cushions on each of the four corners. The base area is 16.5" (41.9 cm)…

FITS 12.5mm RODS Pack of 12 lattice support clamps that fit rods up to 12.5mm in diameter METAL WITH SILVER FINISH Clamps are made of high quality metal with a silver finish EASY TO USE Tighten clamps using an Allen wrench - Avoid overtightening INCLUDED Twelve clamps only - Rods…

Corning offers a 7/16" (1.1cm) diameter by 6 1/2" (16.5cm) support clamp for Corning Cat. No. 6795PR and 400188 temperature probes. Support has two openings, 1/3" (9mm) and 0.15" (3.75mm), for holding probes. It is designed to be used with a boss head clamp (Corning Cat. No. 440140) or standard…

This reaction vessel clamp for O-rings and flat flanges is a cast bronze ring with a black oxidized finish. Three insulated, spring activated clamping arms fit beneath the flange of the flask body. Simple pressure on the heat-resistant fiber knobs and a twist, permit attachment or removal.

Clamp features vinyl coated three pronged jaws that open to 2.25" wide. Includes fiberglass sleeves and a clamp holder that can be rotated 360°.

Cast iron bases with gray enamel finish. The base is 3mm thick with a welded plate on the mounting hole. This gives the support rod 10mm of screw support, which is three times thicker than other traditional stands. The support rod includes an 80mm long rod to provide more torque when securing the…

Laboratory support jacks are constructed of chemically resistant anodized aluminum and stainless steel. The scissor jack design enables height adjustment with a simple turn of the knob. LBJK44 has a 4" x 4" platform that can be vertically adjusted fro

Ideal uses for beakers, Erlenmeyer flasks, test-tubes, boiling (Florence) flasks, burettes. For securing the clamp to a frame or other apparatus an additional holder (sold separately) will be needed. Please see recommended Boss Head list. The screw adjustment allows for precise pressure when…

Center-flanged Pipe Stem Triangles protect glassware on hotplates and over burner flames.

Similar in design to our Screw Compressor Clamps except that the compression adjustment screw has a 1" (25mm) diameter serrated head for greater leverage. The clamps are constructed from brass and plated for corrosion resistance.

Each set contains a stamped steel base and rod along with 2, 3, 4, or 5 cast iron rings with clamps. Sets are shipped in specially designed boxes.

Like 2824B33 except with 12.5 mm extension rod. Holds 6 to 13 mm diamter objects up to 18 cm form support rod. Overall length is 21 cm. Requires clamp holder for attachment.

Anodized aluminum construction Three sizes Convenient Aluminum lab-lifts provide stable height adjustment for lab items such as flasks, baths and small equipment weighing up to 45 lbs. Aluminum lab-lifts come in three sizes: 4” x 4”, 6” x 6” and 8” x…