Casework, Casework
-
32 3/8" Tall Mobile Cabinets, 3 Drawer
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Sinks
INSTOCK LabsThese durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required. …
-
Standing Height Base Cabinets with 2 doors
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Wall Cabinet Hanging Rail
MacBickFormed of heavy guage cold-rolled steel. Designed to capture lip on top rear of wall cabinets for easy installation.
-
Apron Rails
INSTOCK LabsApron Rails are used to span a knee space area between two cabinets. Attachment hardware is included. Can be cut to fit in the field.
-
Cold Water Faucet
INSTOCK LabsCold Water Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
1 Drawer / 1 Door Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC40 standing height base cabinet…
-
This monitor arm rotates 360 degrees at two points. With an adjustable head with universal monitor mount, this arm easily clamps onto any lab bench worktop.
-
Solvent Storage Standing Height Cabinet has self-closing doors and are used to store flammables and solvents. Construction meets UFC, OSHA and MFPA No. 30-1993. Includes vent bungs with flame arrestors. The doors are self-closing and synchronized so that both doors will always fully close. The…
-
-
27 1/4" Tall Mobile Cabinets, Right Hinged
INSTOCK LabsMobile cabinets are on locking swivel casters which allow them to be moved. Ideal for under a table or workstation lab environment. Mobile cabinet has a finished back and top. Provided without locks. Cabinet has counter weighted anti-tip design. Optional work surface sold separately.
-
Steel Pipe Enclosures
INSTOCK LabsPipe Enclosures are used to provide a cover for pipes running from the ceiling to the work surface. This enclosure can be used for island or perimeter locations. They can support pegboards or water purification systems. The cover is pre-punched for attachment and is furnished in three…
-
-
Suspended Pencil Drawer
INSTOCK LabsSuspended Pencil Drawer is designed to be hung from an INSTOCK table. Each suspended pencil drawer is furnished with complete hanging hardware.
-
Mixing Faucet
INSTOCK LabsMixing Faucets are deck mounted. They are chrome plated brass with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats.
-
Wire Super Slide, for 24" deep units
INSTOCK LabsWire super slide is made of nickel-chrome wire with clear protective coating. Only for use with 24" deep units. Designed to hold metro totes.
-
Standing Height Corner Cabinets, Right Hinged
INSTOCK LabsStanding Height Steel Base Cabinets are durable and constructed with SEFA 8 Metal and compliant load-bearing capacity. Pearl White is a urethane powder coating that provides reliable chemical and abrasion resistance.
-
Modular Workstation E1 includes: (2) 72" Lab Bench Half Height (36) with Casters (C), Ships Knockdown (K) (2) 72" Lab Bench Half Height Worktop - Epoxy Resin, Beveled Edge, Black (8) 36" F24 Powder Coated Steel Upper Shelves (4) 96" F11 Wall System Support Rails (4)…
-
Apron Frames with Drawer
INSTOCK LabsApron Drawer with Drawer are used to span a knee space area between two cabinets. Attachment hardware is included.
-
Set includes four leveling glides.
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC41 standing height base cabinet…
-
Surgical Scrub Sinks
Eagle Group16ga/304 stainless steel, removable front access panel, 4" backsplash, square edge on front and sides, temperature control mixing valve, Z-clips for wall mounting, includes stainless steel flat strainer drain, tail piece and p-trap, includes flexible stainless steel supply hoses.
-
Cabinet Fillers
INSTOCK LabsCorner Fillers are used to close the gap between two cabinets in a corner. Adjustable fillers can be cut to fit and include a slip fit trim angle. Front Fillers are used between adjacent base cabinets of between a cabinet and the wall. Rear and Center Fillers are used between back-to-back…
-
Solid 1 Door Wall Cab
MacBickFully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. Solid door wall cabinet…
-
End Supports
INSTOCK LabsPanel End Supports are to be used in place of a cabinet at one end of a cabinet run to support drawer frames or apron rails. Can be used to support the intersection of two aprons or rails.
-
Knee Space Panel 22"D
MacBickFormed of heavy guage cold-rolled steel. Designed to fill the open area under the apron at rear of cabinet.
-
Standing Height, Acid Storage Cabinets, Left Hinged
INSTOCK LabsAcid Storage Standing Height Cabinet are used to store acids and are lined with a chemically resistant polyethylene liner. Full height doors are lined with 1/8" thick polyethylene. Chemical resistant 3/16" thick molder polyethylene lining with coved corners and 2" lip at front…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with 5-knuckle stainless steel hinges, stainless steel wire pulls, and full overlay construction. BC03 standing height base cabinet…
-
Fully-welded, heavy-gauge, steel cabinets are designed to SEFA 8 performance standards and built to rigorous benchmarks. Includes white powder-coated lab grade finish with full extension soft close slides, stainless steel wire pulls, and full overlay construction. Standing height BC30 4-drawer…
-
These durable black epoxy sinks are chemically resistant, come with coved corners and are pitched to a corner or center drain. All tub sinks are furnished complete with a tail piece and strainer. Drop in sinks can be converted to be undermount sinks, however cabinet sink supports will be required.
-
Faucet and Aerator
INSTOCK LabsFoot Operated faucet is deck mounted with a vacuum breaker. Faucet is chrome plated with an 8" swivel gooseneck. Valves are self-contained units with replaceable stainless steel seats. Faucet has a floor mounted foot operated valve. DI/RO faucet is deck mounted for distilled, deionized or…
-
Mobile Cabinet Work Surfaces
INSTOCK LabsMobile Cabinet Work Surface is 3/4" thick black phenolic resin that provides a 1" overhang on the front and a 1/2" overhang at the rear and sides. It adds 3/4" to the over all height of the cabinet. There is a grip notch included under the front edge of the work surface to…