Thermo Scientific Nalgene

Carboys, Thermo Scientific Nalgene

Compare Tool

Select up to 3 products

Sort
View
Show
  • Polypropylene Carboys With Spigots

    Thermo Scientific Nalgene

    Nalge 2319 series Autoclavable and leakproof Similar to 1753C10 series, but made entirely of polypropylene, including spigot and size 83B cap with TPE gasket. Before autoclaving, set closure on carboy without engaging threads. Dismount and disassemble spigot before autoclaving. Autoclave only…

  • Sanitary Carboys

    Thermo Scientific Nalgene

    Ideal for any application where sanitary fluid handling is required Clear polycarbonate Autoclavable at 121°C Lot traceable/lot controlled Polycarbonate carboys are clear, tough and can be used from -100 to +121°C. Lighter and safer than glass, these carboys can hold 20…

  • Nalgene Polypropylene Carboys

    Thermo Scientific Nalgene

    Excellent for autoclaving batches of culture media, distilled water and solutions Nalge 2250 series Graduated to contain in 1-gallon and 5-liter increments Two molded handles and size 83B polypropylene screw cap; also accepts No. 13 1/2 rubber stopper in place of cap Not recommended for use…

  • Quick Connect Closures, Venting

    Thermo Scientific Nalgene

    Caps with quick connect/shut off valves Nalge 2158 series Leakproof 83B caps Two port and three port configuration Excellent for vacuum trap type applications Quick filling venting closure system will fit on all Nalgene carboys and large bottles with 83B neck finish.…

  • Polypropylene Jugs

    Thermo Scientific Nalgene

    Nalge 2221 series Rigid bottles for smooth pouring Large molded handle accommodates gloved hand Excellent chemical resistance Autoclavable and leakproof Dimensions: 1 gallon jugs measure 11 3/4” high and take size 38-430 caps. 2 gallon jugs measure 15” high and take size 53B caps.…

  • Rectangular Polypropylene Carboys With Spigots

    Thermo Scientific Nalgene

    Nalge 2321 series Rectangular carboy for storing and dispensing media, sterile water, etc. Autoclavable Similar to 1753F10 series, but of polypropylene, with stainless steel carrying strap Leakproof Autoclave only when empty. Before autoclaving, set cap or closure on top of the container…

  • Polyethylene Carboy with Handles

    Thermo Scientific Nalgene

    For storing corrosive chemicals and standard solutions Nalge 2210 series Low-density polyethylene bottles have two molded handles and size 83B polypropylene screw cap Leakproof Graduated to contain in 1-gallon and 5-liter increments Dimensions: 20 liter carboy: 20 1/2” high, 11…

  • Replacement Spigots for Nalgene 2318 Series

    Thermo Scientific Nalgene

    1753C67 is a standard spigot for carboys (Nalge 6422) 1753D30 spigot is needle type for tanks (Nalge 6421) Both are polypropylene with thread size 1 1/8” - 12 female screw thread Includes removable tubing adapter for smaller tubing; fits sizes (1/4” or 5/16” i.d.) 5/8”…

  • Fluorinated High-Density Polyethylene Carboys

    Thermo Scientific Nalgene

    Useful with most acids, alkalies and aggressive organic solvents Fluorination enhances long-term container performance and prevents permeation loss Split and puncture resistant; Tefzel spigot and fluorinated polypropylene screw closure Stainless steel carrying strap

  • Low-Density polyethylene carboys

    Thermo Scientific Nalgene

    Nalge 2318 series Supplied with cap and Thomas number 1753C67 spigot Leakproof Sizes 10 L and larger have two molded handles and take Cap No. 83B; 4 L size takes Cap No. 38-430 Graduated to deliver in 1-gallon and 5-liter increments. 4 L is not graduated.

  • Clearboys Polycarbonate Carboys

    Thermo Scientific Nalgene

    Usable at subfreezing temperatures and in cold rooms Nalge 2251 series Glass-like clarity, with size 83B polypropylene screw cap Autoclavable and leakproof Recommended only for use with water and non-hazardous aqueous solutions; also usable with dilute acids and some alcohols; not usable with…

  • Filling / Venting Closure With 1/4 Inch Fittings PP 83B

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Filling/Venting Closures are aseptic handling solutions for pharmaceutical, biotechnology and laboratory liquid transfer applications. For use with Nalgene bottles and carboys with 83B closures, including pre-mounted lengths of platinum-cured silicone tubing…

  • Fluorinated Carboys and Bottles

    Thermo Scientific Nalgene

    Useful with most acids, alkalies and aggressive organic solvents Nalge 2097 series HDPE with polypropylene screw closure Heavy duty walls Leakproof Safe, durable, cost-efficient, high-density polyethylene narrow mouth bottles are suitable for shipping Fluorocarbon surface, a Teflon ® -like…

  • High-Density Polyethylene Carboys

    Thermo Scientific Nalgene

    Nalge 2320 Leakproof Molded-in graduations Built-in shoulder loops have attached handle Space saving rectangular shape Excellent for collecting and dispensing distilled water Tough, rigid and translucent Dimensions: 9 liter carboys measure 8 1/2” x 5 3/4” x 14”; 20 liter…

  • Filling / Venting Closure With 1/4 Inch Fittings PP 53B

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Filling/Venting Closures are aseptic handling solutions for pharmaceutical, biotechnology and laboratory liquid transfer applications. For use with Nalgene bottles and carboys with 53B closures, including pre-mounted lengths of platinum-cured silicone tubing…

  • Large Capacity, Polypropylene Bottles

    Thermo Scientific Nalgene

    Nalge 2203 series Leakproof Same design as 1706L80 series, but autoclavable Sizes 1/2 and 1 gallon include size 38-430 cap; 2 gallon size includes 53B cap Autoclavable 1 and 2 gallon sizes have loop on shoulder

  • Polyethylene Jerricans

    Thermo Scientific Nalgene

    Lightweight and chemically resistant Nalge 2240 series HDPE For storing, carrying, and dispensing liquids, handle and pouring spouts are integrally molded onto stable, rectangular container Spout sealed by captive leakproof polypropylene screw cap, size 53B Molded…

  • Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    For retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.

  • Quick-Action Spigot ETFE Fits 1-1/8" Spigot Boss For Fluorinated Carboys 1-

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Quick-Action Tefzel Spigots are chemically resistant to selected solvents and other chemicals. Body and plug are made of Tefzel ETFE Accepts tubing with 5/8'' I.D. Autoclavable

  • Polycarbonate Rectangular Carboys With Spigots

    Thermo Scientific Nalgene

    Nalge 2322 With polypropylene spigot and screw closure High-impact strength Leakproof Autoclavable Window-clear Sturdy handgrips Space-saving rectangular shape. All sizes feature molded-in graduations. Good for cold room use. Autoclave only when empty. Before autoclaving, set cap or…

  • Filling/Venting Closure

    Thermo Scientific Nalgene

    For aseptic liquid transfer to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters.…

  • Clearboys Polycarbonate Carboys

    Thermo Scientific Nalgene

    Nalge 2317 series Autoclavable and leakproof Screw cap size 83B; neck i.d. 70 mm Ideal for dispensing sterile water and non-hazardous aqueous solutions. Practical for use in cold rooms, even at subfreezing temperatures. Polypropylene spigot is sealed by two Teflon® O-rings. Delivery spout takes…

  • LDPE Carboys with Tubulation

    Thermo Scientific Nalgene

    Perform applications with confidence thanks to the strength, long life and leak resistance of these one-piece molded Thermo Scientific™ Nalgene LDPE Carboys with Tubulation. Convenient wide shoulder handles for easy carrying. Features: Molded in graduations in 1 gal. and 5L…

  • Wide Mouth Polypropylene Carboys with Handles

    Thermo Scientific Nalgene

    Store and transport solids, powders and liquids using Thermo Scientific™ Nalgene™ Wide Mouth Polypropylene Carboys with Handles. These durable natural polypropylene (PP) carboys feature a convenient wide-mouth opening to promote ease of cleaning and dispensing. The wide-shoulder…

  • High-Density Polyethylene Rectangular Carboys

    Thermo Scientific Nalgene

    Nalge 2211 series Space-saving design High-density polyethylene with stainless steel bail handle Molded-in graduations in liters and gallons Polypropylene screw cap, size 100 Leakproof Neck i.d. 3 1/2 inches 20 liter size has molded-in hand-grips Dimensions: 9-liter carboys measure 216 x…

  • Carboy Vent Filter, 0.2 Micron

    Thermo Scientific Nalgene

    Compact filter for venting and solvent filtration applications Useful for maintaining purified water stored in carboys Features a Teflon PTFE membrane Hydrophobic membrane permits sterile venting on a slow exhaust/liquid autoclave cycle of carboys up to 50L Can be used up to…

  • Carboy Heavy Duty PP w / Handles 20L

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Heavy Duty Vacuum Carboys are useful as a vacuum trap, and will hold full vacuum up to 8 hours. Constructed of thick walled natural polypropylene PP) provides added strength. Supplied with white 83B PP closure with TPE (thermoplastic elastomer) gasket. …

  • HDPE Lowboys With Spigots

    Thermo Scientific Nalgene

    High-density polyethylene Nalge 2323 series Low-profile design fits easily into tight spaces, on shelves or in refrigerators Leakproof and stackable Patented Convenient integral handgrip for safe, easy transport Ideal for storing and dispensing reagents, titrants, distilled water Tolerates…

  • Quick Connect Closures, Hose Barb Fittings

    Thermo Scientific Nalgene

    Hose barb fitting to quick connect adapters Nalge 2159 series Provides multiple connection to the quick filling closure ports Ultimate in versatility and adaptability in creating vacuum trap type systems. Available in straight or elbow design to fit 1/4” or 3/8” tubing…

  • LDPE Wide Mouth Carboys

    Thermo Scientific Nalgene

    Nalge 2234 series Lower-density bottles have molded handles and polypropylene screw cap Size 100 Walls are rigid and opaque Leakproof Neck i.d. 3 1/2 inches Graduated to contain in 1-gallon and 5-liter increments Dimensions: 10 liter carboys measure 13 3/4” high x 9 7/8” o.d.;…

  • Rectangular Carboys

    Thermo Scientific Nalgene

    High-density polyethylene Nalge 2303 series Polypropylene screw cap and molded-in handgrips Tubulation built-in Leakproof Rectangular carboy with molded volume scales, stainless steel handle and tubulation which takes 1/2” i.d. tubing; polypropylene screw cap, size 100; neck i.d. 3…

  • 13L HDPE Jerrican with Tethered Polypropylene Closure

    Thermo Scientific Nalgene

    Store reagents with the Thermo Scientific™ Nalgene™ Jerrican with Tethered Polypropylene Closure, featuring a space-saving design, molded-in handle and recessed grip at the bottom to provide better control when pouring.  Key Features: Jerrican is ideal as a reservoir…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.