Humboldt

Compare Tool

Select up to 3 products

1 - 25 of 25
Sort
View
Show
  • Standard Burner with Air Regulator Only & Flame Stabilizer

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11…

  • Tirril Burner for Small-Scale Burning Test

    Humboldt

    The Tirril Burner for Small-Scale Burning Test (ASTM D5025) supports the following standards: ASTM D5025 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Supplied complete with…

  • High-Temperature Burners

    Humboldt

    When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

  • Tirril Burners with Pilot Flame

    Humboldt

    The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

  • Standard Burner with Air Regulator Only

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Pipe Mounting-Type Burner

    Humboldt

    Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

  • Tirril Burners without Pilot Flame

    Humboldt

    The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

  • Standard Micro-Bunsen Burner with Air Regulator Only

    Humboldt

    Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections.  *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners.…

  • Adjustable Micro-Bunsen Burner with Adjustable Gas Valve

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • General Purpose Tirril Burners

    Humboldt

    These noiseless burners provide a clear flame of any desired height from 1/2" (12.7mm) to 12" (305mm), with separate control of both flame temperature and flame length. The burners incorporate threaded aluminum air control sleeves and precision machined, fine-pitch brass needle valves…

  • High Temperature Blast Burner

    Humboldt

    Designed to burn all gases in large volume with a short, wide and uniformly high-temperature flame. A special micrometer needle valve is used to regulate the gas and a safety cap prevents dangerous backflashes. The burner features a plated, injector-shaped venturi tube and a direct feed inlet for…

  • Burner Wing Tops

    Humboldt

    Designed to produce a broad, flat, fan-shaped flame. Ideally suited for use in bending glass tubing and other similar applications. Made of brass.

  • Pilot Flame Burner

    Humboldt

    Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

  • Adjustable Burner with Adjustable Gas Valve & Flame Stabilizer

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Burner Gas Connector

    Humboldt

    Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

  • Adjustable Burners with Threaded Needle Valves

    Humboldt

    Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

  • Fletcher Burner

    Humboldt

    This burner is engineered to produce a hot flame with economical gas consumption. The unit features dual adjustments for air and gas. Simply turn the knurled knob for gas,and turn the threaded yoke to regulate the air. Adjustable within 1/8" turn and has a 1/8" (3.2mm) IPS nipple below the…

  • Utility Blast Burner

    Humboldt

    This burner features a removable nozzle with perforated tip and orifice designed to aim a large, hot, pointed flame in a modified M.I.T. pattern with great accuracy. A universal ball joint positions the flame easily for working large pieces of hard glass. Separate needle valves with leak-proof…

  • Ring Burner

    Humboldt

    The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".

  • Beaker Handle Kit

    Humboldt

    Adjustable Band Clamp Kit for making a great carrying handle on beakers of all sizes.

  • Burner Tops

    Humboldt

    Various tops for use with Humboldt burners.

  • Universal Blast Burner

    Humboldt

    This bleeder valve unit provides small needle-sized to large brush flame patterns for fusing ore, working Pyrex and soft glasses, and performing other high-temperature melting applications. Extremely accurate flame direction, from three interchangeable burner tips, a telescoping mixing tube sleeve,…

  • Torch Support

    Humboldt

    The Torch Support turns hand torches into an adjustable position blast burner. This instantly detachable support is constructed of plated brass with heavy cast iron tripod base and pedestal connected by a universal ball joint to a clamp that fits on the torch handle. The unit is equipped with…

  • High-Temperature Adjustable Burner

    Humboldt

    High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water…

  • Flame Shield

    Humboldt

    Used to protect flame from drafts. The unit features a set of spring clips designed to fit 7/16" to 5/8" (11mm to 16mm) burner tubes. The cone is spot-welded and is 2" (51mm) in diameter at the bottom.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.