Hooded lighter is safe and economical. The hood traps gas and protects the lighting file. Replacement flints are also available.

Power supply (used for Argos StarFire ST burner)

Flexible tube of rust-resistant steel covered with rubber and wrapped with braided cotton cloth. Slip-on ends for attachment to 9mm gas lines. 3 ft. long.

Protective hood acts as a gas trap for quick ignitions. Synonyms: burner ignitors

Bunsen Burner, LPG - StabiliBase, Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve. Burner is designed to have the flame controlled via the valve…

Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer. Mounted on a die casted zinc alloy base. Quality gas burner for lab. use, aluminum burner mixing tube comes complete with a brass flame stabilizer and is threaded into a die casted zinc alloy…

The portable micro butane burner is easy to operate and has a trigger ignition and adjustable flame control. The simple on and off control and steady tip-resistant design, make it a useful and portable burner almost anywhere in the lab. The flame can reach a maximum temperature of approximately…

NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 3 FEET Tubing is 3 feet (0.9m) in length, making the hose ideal for spread-out laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…

Bunsen Burner, LPG - Flame Stabilizer, StabiliBase Anti-Tip Design SIMPLE DESIGN This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed…

The laboratory gas burners for greater security with non-contact IR sensor and functions. The Fuego SCS represents a new class among laboratory gas burners. With its innovative design and the extensive standard equipment, this laboratory gas burner is suitable for all flame related…

Humboldt's Adjustable burners utilize the same high-quality die-cast bases as our Standard Burners, but provide a precision needle valve to achieve an accurate, adjustable flame. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11 inch…

Safety enhanced laboratory gas burner, battery operated with touch free IR-sensor and button function. Innovative technology that thinks with you! Fuego SCS pro with new functions & graphic display The Fuego SCS pro represents a new status among laboratory gas burners. The…

When an extremely hot flame is required, these Meker-type burners form uniform blue cones of intese heat with no backflashes. Onepiece, nickel-plated venturi tube. Die cast, zinc alloy, nickel plated octagonal base. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for…

Ideal for intermittent use without frequent relighting. The burner features a sleeve-type air regulator and stopcock for gas control and an integral pilot light tube with screw for adjusting the pilot flame. Specifications: Gas type: Natural Inlet OD: 3/8" (10mm) CFH*: 5.3 …

High temperature bunsen burner with adjustable control. Has fine-pitch threaded valve, 1-1/4 in. diameter and perforated monel and wire mesh heat intensifier. Die cast, zinc alloy, nickel plated octagonal base. For use with all gases. *Note: CFHs and BTU Outputs are figured on: 5 inch Water…

Generate a 2,400F (1,300C) pinpoint flame for a wide variety of torch applications. Units are self-igniting and have an adjustable flame. Unit shipped empty, order butane separately. Synonyms: butane torch; butane torches; mini torch

Designed for pipe mounting, this burner features a flame stabilizer and a stopcock for gas control. A 1/8" NPT nipple is mounted below the stopcock for pipe mounting. Specifications: Gas type: Natural and LP Inlet OD: 1/8" NPT CFH*: 5.5 BTU Output*: 5,637.5 …

The Humboldt Ring Burner features an improved design that puts the guide pins on the inside circumference so that the burner remains equidistantly around the still. A Fletcher attachment regulates the gas and air. The overall shank length is 11" (279mm), ID is 4-3/4".

The Tirril Burner w/o Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Burner produces a clear flame of any…

Premium Meker Bunsen Burner, LPG - StabiliBase Anti-Tip Design PREMIUM DESIGN The Meker Bunsen burner is designed for finely controlled air and gas mixture. Provides a safe, continuous stream of flammable gas used for heating, sterilization and combustion. This burner produces a…

Annealing without a flame! All stainless steel Long - Life double-pipe system Sterilization time 5-7 seconds Itself into angular adjustment Available in two sizes The electrical sterilization SteriMax is best suited for the sterilization of inoculation loops, needles and…

This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

Gasprofi 1 SCS micro - Series: Safety and comfort in the smallest possible space. Optimal for all flame-related applications in the laboratory. Simply safe to operate Depending on the model, the Gasprofi 1 SCS micro - Series can be operated with touch free IR-Sensor, button function or…

Requires no batteries or fuel Push-button trigger Weighs only 3.1 ounces The small, self-contained piezoelectric generator produces sparks at 20 Kv. Lighter can be used to light bunsen burners, gas stoves, propane torches or oxy-acetylene torches. Plastic pistol-grip provides…

NEOPRENE Premium quality neoprene tubing hose is flexible, safe, and resilient - perfect for any science laboratory 2 FEET Tubing is 2 feet (0.6m) in length, making the hose ideal for general laboratory setups FITS STANDARD GAS INLETS Designed for connecting a standard 8-10mm diameter…

The Tirril Burner with Pilot Flame (ASTM D3713) supports the following standards: ASTM D3713 Humboldt's Flame Test Burners are designed to be used as ignition sources for small-scale burning tests, such as the UL flame test and other similar test standards. Provides separate control of both…

This product includes 3 each of the Burner Head o-ring, inorganic end cap o-ring, and impact bead o-ring, 5 organic end cap o-rings, and 2 end cap/impact bead o-rings.

The portable butane burner is a great option for any lab because the wide base and low profile provides the burner with a stable footing. The support rings attached at the top, allow you to use the burner as a hotplate for laboratory glassware. The valve and ignition buttons are separate for…

This all metal, permanent wick alcohol burner has a tank capacity of 100ml. The 'wick' portion is a ceramic fiber inserted into a thin copper tube. This construction allows for a constant flame. The burner is fueled by high-quality alcohol which can be found in most local hardware stores (not drug…

Humboldt Bunsen Burners are high-quality, American-made burners with nickel-plated, die-cast zinc bases. Burners feature aluminum mixing tubes and serrated gas inlet connections. *Note: CFHs and BTU Outputs are figured on: 5 inch Water Column Pressures for Artificial and Natural Burners. 11…

Switching power supply for global electricity supply for Fuego series, Gasprofi 1 micro series, Flame 100/110, Gasprofi (as of serial no. 07xxxxx) and charging station Art.-No. 8.000.911 / 8.000.900

Required for the determination of refractory metals when using nitrous oxide-acetylene flames. Can also be used for air-acetylene. Can be rotated with most instruments to reduce sensitivity.