Buffer Solutions
-
Certipur® Buffer Solution, pH 1.00
MilliporeSigmapH: 1.0 (H2O, 20°C) Solubility: (20°C) soluble Density: 1.00 g/cm3 (20°C)
-
TMB PRESTAINED RED ELISA PEROXIDASE SUBSTRATE
Rockland Immunochemicals IncTMB Prestained Red ELISA Peroxidase Substrate produces a soluble blue end product of ELISA, read at 370nm or 655nm.
-
Buffer solution, pH 4.00±0.01 @ 25°, red, NIST traceable
BeanTown ChemicalMDL No: MFCD00146206 Liquid
-
TE Buffer [10X]
G-BiosciencesSynonyms: TE Buffer, Tris-EDTA Buffer, T10E1 Buffer The TE Buffer is a common molecular biology buffer used for protection of DNA and RNA from degradation. The Tris buffering agent and EDTA metal chelating properties help protect DNA and RNA. The TE Buffer [10X] is offered in 0.5 and 1L…
-
Sodium Bicarbonate 7.5%
Quality BiologicalSodium Bicarbonate (NaHCO3) is typically used in cell culture media as a buffer. Endotoxin and Mycoplasma Tested Applications Although NaHCO3 does not have the buffering capacity of HEPES, it is occasionally preferred over HEPES because of its lower toxicity and nutritional value to cells…
-
SIGMA Citrate Buffer Solution, 0.09 M,
MilliporeSigmaStorage Temperature: 2-8°C Application: For use in acid phosphatase reactions in conjunction with p -nitrophenyl phosphate (pNPP) enzyme substrate.
-
UN No.: UN2672 Class: 8 Pkg. Group: PG III
-
ROCHE ABTS™ Buffer
MilliporeSigmaStorage: 2-8°C UNSPSC Code: 12352204 RIDADR: NONH for all modes of transport Application: ABTS Buffer is a solvent for ABTS. ABTS solution is the ideal substrate solution for enzyme immunoassays with horseradish peroxidase (HRP) as a marker enzyme. Because of the high…
-
Tris-HCl Buffer (1.0 M, pH 6.5, 0.2 Micron Filtered)
Boston BioProductsComponents: Tris Base / Tris-HCl(1 M), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 6.5 ± 0.2 Storage: 2-8°C
-
Fluka Formic acid solution puriss. p.a., for HPLC, 50% in water, 49-51% (T)
Honeywell Research ChemicalsChemical name: Formic acid solution Product Brand: Analytical Material form: Liquid Molecular weight: 46.03 Molecular formula: CH2O2 Chemical purity: 49-51% (T) UN Number: UN 3412
-
pH Buffers
YSIVarious pH buffers for pH probe calibration. Buffer cases are available with a single buffer type or with an assortment of buffers (2 pints of pH 4, 7, and 10 buffers).
-
20X SSPE Buffer (3.0 M Sodium Chloride, 0.2 M Sodium Hydrogen Phosphate, 0.02 M…
Rockland Immunochemicals IncThis product is a 20X concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 3.0 M Sodium Chloride, 0.2 M Sodium Hydrogen Phosphate, 0.02 M EDTA at a pH of 7.4. Meticulously prepared…
-
-
Buffer, pH 10.00, Blue, Standardized
Reagents®Composition: Water 99.52%, Sodium Carbonate 0.26%, Sodium Bicarbonate 0.21%, Thymol 0%, Methyl Alcohol 0%, Calcocid Blue AX Double 0% Boiling Point: Approximately 100°C Density: 1 Melting Point: Approximately 0°C Color: Blue liquid Physical State: Liquid pH Range: 10 Solubility…
-
10X TE pH 8.0 (100 mM Tris HCl 10 mM EDTA) DEPC TREATED, 1L, Liquid (sterile…
Rockland Immunochemicals IncTE buffer is a concentrated stock solution and should be diluted appropriately with distilled, deionized water or equivalent to its final working concentration. This buffer consists of 100 mM Tris HCl and 10 mM EDTA at a pH of 8.0. Meticulously prepared using ultra pure reagents dissolved in DEPC…
-
-
-
pH Calibration buffers for tight tolerances For meters with 0.001 resolution Buffers are color-coded for easy visual identification.
-
TAE
RPI (Research Products International)10X solution contains: TRIS-Base: 0.4 M Acetic Acid: 0.2 M EDTA: 10 mM pH (10X Solution (@25°C): 8.2-8.4
-
Fluka Hydrochloric acid concentrate for 10L standard solution, 1 M HCl (1N)
Honeywell Research ChemicalsChemical name: Hydrochloric acid Chemical synonyms: Hydrochloric acid solution; Hydrogen chloride solution Product Brand: Analytical Density (g/cm3): 1.1 Molecular weight: 36.46 Molecular formula: HCl Chemical purity: =99% UN Number: UN 1789
-
Color-Coded pH Buffer Solution Set
chemForce® (powered by Thomas Scientific)Size: 3 x 500 mL Harmonized #: 3822.00.0002 5090 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Color coded Physical State: Liquid pH: 4, 7, 10 Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
BuffAR pH 4.01 Reference Solution, StandARd
Avantor - Macron Fine Chemicals™Color Coded Red Specific Gravity: 1L = 1.00 Kg
-
FETAL BOVINE SERUM, Certified, Heat Inactivated Origin: United States triple 0.1…
Rockland Immunochemicals IncHeat inactivated fetal bovine serum is for in vitro diagnostic use, not for human or animal therapeutic use. Uses other than the labeled intended use may be a violation of local law. Certified Fetal Bovine Sera meets USDA requirements for abattoir-sourced animals, traceability and country of…
-
-
-
StrongBlock I
Lab BioreagentsLab Bioreagents Buffers have been developed through the screening of >2000 compounds with the support of machine learning (AI) and optimized through kinetic and dynamic binding tests. StrongBlock (I, II, III) are newly developed blocking buffers that provides exceptional performance and broad…
-
Fluka Iodine solution volumetric, Reag. Ph. Eur., 0.05 M I2 (0.1N)
Honeywell Research ChemicalsChemical name: Iodine solution Product Brand: Analytical Density (g/cm3): 1.02 Molecular weight: 253.81 Molecular formula: I2 UN Number:
-
BLOTTO A PRE-MIXED, 500mL, Lyophilized
Rockland Immunochemicals IncUse BLOTTO whenever procedures call for immunoanalytical grade non-fat dry milk. Alternative blocking agents such as BLOTTO A (solution of TBS, 5% non-fat dry milk and 0.05% Tween-20) and BLOTTO B (solution of TBS, 1% non-fat dry milk, 1% BSA and 0.05% Tween-20) are also available. BLOTTO A is a…
-
-
Low-EDTA 1X TE, pH 8.0
Quality BiologicalLow-EDTA 1X, pH 8.0 is molecular biology grade TE buffer used to store DNA and RNA. EDTA chelates Mg2 and other divalent metals ions – (inhibits DNAse and RNAse to suppress DNA and RNA degradation). Tris is a buffering agent to keep the solution at a defined pH – The ‘Cl’ or ‘HCl’ indicates the…
-
LowBinding I
Lab BioreagentsLab Bioreagents LowBindings (I, II, III, IV, V,) are newly developed assay buffers that provides exceptional performance and broad compatibility for Western blot, ELISA, IHC and nucleic acid detection assays. The LowBindings helps to reduce the non-specific bindings, negative effects of interfering…
-
NGB II
Lab BioreagentsLab Bioreagents Buffers have been developed through the screening of >2000 compounds with the support of machine learning (AI) and optimized through kinetic and dynamic binding tests. NGB (I, II, III) are specialized developed assay buffers that provides exceptional performance and broad…