Kimble

Bottles, Kimble

Compare Tool

Select up to 3 products

1 - 32 of 101
Sort
View
Show
  • Graduated GL 45 Media Storage Bottles with Caps

    Kimble

    Ideal for general laboratory use including mixing, storing or transporting culture media, chemicals or solvents Enhanced graduations Wide mouth with pour ring Completely autoclavable Polypropylene caps included Extra-wide opening for ease of filling, dispensing, pipetting …

  • Amber Dropping Bottles

    Kimble

    Designed to protect contents from UV rays and ideal for light-sensitive products. Supplied with 20-400 GPI screw cap, bulb and plastic or glass dropper assembled on the bottle Manufactured from soda-lime glass conforming to USP Type III and ASTM E438, Type II requirements

  • Culture Tubes, KIM-KAP®, Polypropylene Closures, Autoclavable, Color Coded

    Kimble

    Color Coded - natural, red, green, yellow and blue

  • KIMAX Milk Dilution Bottles

    Kimble

    Suitable for autoclaving Plastic screw cap with cemented-in rubber liner is suitable for autoclaving up to 121°C 1756K30 is useful for water sampling and for tissue culture 1756K60 bottle has mark at 99 mL level KIMAX-35 bottles are designed from the requirements for milk dilution bottles…

  • GL 45 Storage/Media Bottles, Plastic Safety Coated with Blue Polypropylene Cap

    Kimble

    KimCote® plastic-coated bottle has enhanced graduations and marking spot is permanent white enamel. This general use bottle is provided with a wide opening (approx. 30 mm ID) GL 45 screw thread and is supplied with linerless autoclavable (121 ºC max) polypropylene blue cap. Bottle design includes a…

  • KIM-KAP®, Polypropylene Closures, Autoclavable, Color Coded

    Kimble

    Convenient, economical closures for use with the Kim-Rak or other disposable culture tubes. Sterility of contents is maintained without the need for cotton plugging. Kim-Kaps can be removed and replaced without contamination of the contents. Yellow cap color.

  • Culture Tubes, KIM-KAP®, Polypropylene Closures, Autoclavable, Color Coded

    Kimble

    Color Coded - natural, red, green, yellow and blue

  • Pycnometer, 10 mL

    Kimble

    Thermometer with Standard Taper No. 10/18 ground joint serves as stopper Side arm is fitted with vented 5/12 cap Thermometer range 14° to 37°C in 0.2° divisions; tolerance ±0.2°C Capacities are within 10% of nominal capacities etched on flask 50 mL…

  • Specific Gravity Bottles (Pycnometers)

    Kimble

    KIMAX® brand, Hubbard-Carmick Used in the determination of specific gravity Conforms to ASTM D 70, D 1963, D 1429 and D 115 for a variety of semi-solid materials and emulsions Conical stopper has 1.6 mm hole to allow air to escape

  • GL 45 Media Storage Bottle Caps

    Kimble

    Caps are designed to fit GL 45 threaded ware. Autoclavable Solid top polypropylene Cap colors available in blue, white, orange, gray, green, or pink High-temperature version with red cap available

  • Clear Glass French Square Bottles Without Caps

    Kimble

    Clear glass allows for easy viewing of contents Wide mouth design makes it easy to add or remove contents Square shape bottle maximize shelf storage space Type III soda-lime glass Five capacities: 0.5, 1, 2, 4, and 8 ounces

  • Neutraglas Serum Bottle Butyl Rubber Stoppers

    Kimble

    Gray butyl rubber formulation passes U.S. pharmacopeia testing for globally-marketed pharmaceutical products. Stoppers contain no plasticizers, 2-mercaptobenzothaizole, nitrosamine precursors or natural rubber latex. Applicable to aqueous solutions with a pH range of 2-10, stoppers are available…

  • Open-Top Black Phenolic Screw Thread Caps without Liners

    Kimble

    Open top closures with excellent chemical resistance Specially formulated phenolic resin to withstand the effects of repeated autoclaving Linerless Identified in ASTM Specification E982, Class A requirements

  • RAY-SORB® GL 45 Storage / Media Bottles

    Kimble

    Heavy-duty, reusable bottles Wide opening for easy access Polypropylene pour rings included The RAY-SORB® process provides a shield to protect light sensitive products. Less than 1% transmission below 400 nm and reduced (5%) from 400-600 nm as compared to untreated, clear,…

  • Wide Mouth Packer Bottles

    Kimble

    Wide mouth design makes it easy to add or remove contents Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Type III soda-lime glass Six capacities: 1, 2, 4, 8, 16 and 32 ounces Choice of six liner styles

  • GL 45 Pour Rings

    Kimble

    Designed for use with 14395 series bottles and 26720 series flasks. Pour rings are made of clear drip-free polypropylene or red ETFE 14395E-452 high temperature ring is recommended for use with 14395H-452 high temperature cap

  • Specific Gravity Bottles, Pycnometers, Le Chatelier Type

    Kimble

    KIMAX®, Le Chatelier type For the determination of the specific gravity of cement, sand and materials of similar fineness For ASTM Standards E 694 and C 188 Marked with “A” to signify adherence to accuracy specifications in U.S. Department of Commerce publication PB-246 623, The…

  • Specific Gravity Bottles, Pycnometers, Medium Length

    Kimble

    Special medium length Ts 10/18 thermometer with a range of 14 to 38°C in 0.2° Accuracy within ±0.2°C Cap for the side tube is Standard Taper 5/12 and has small vent near the top Each flask body is numbered for easy identification The 50 mL size is used to obtain the specific gravity of…

  • Neutraglas Serum Bottle Seals

    Kimble

    Fit 20 mm diameter neck size (20 or 20A aluminum seal finish) Tear-Out style aluminum seals have a removable insert allowing insertion of a syringe needle through the septa Tear-Off style aluminum seals allow removal of the seal by pulling a perforated guide Open-Top aluminum seals…

  • Neutraglas Serum Bottles

    Kimble

    Highly resistant to chemicals, thermal and mechanical shock KG-35 borosilicate glass Meets or exceeds USP specifications for type 1 glass containers KG-35 borosilicate glass has the highest resistance to chemical attack of any commercially available glass. Bottles are ideal for…

  • Bottle Weighing Tall Plug 30 X 60mm Cs18

    Kimble

    KIMAX bottle with a plug-style, closed bottom stopper that fits into an internally ground body. Designed from Federal Specification NNN-B-1493, Type I, Style I requirements Plug-style glass stopper with a closed base fits into the neck of the bottle and seals it to secure contents and…

  • Tall Cylindrical Weighing Bottles with Inner Joint

    Kimble

    Ideal for general micro work and also used as a container for hygroscopic materials where the bottle containing the sample is dropped into the reaction flask. KIMAX® bottle with a cap-style closure that fits over externally ground body The 40 x 80 size accommodates 1 x…

  • Clear Glass Square Tablet Bottles

    Kimble

    Wide-mouth design for efficient addition and removal of contents Packaged in corrugated cartons with divider cells Clear glass allows for easy viewing of contents Type-III Soda Lime Glass

  • Culture Tubes, KIM-KAP®, Polypropylene Closures, Autoclavable, Color Coded

    Kimble

    Color Coded - natural, red, green, yellow and blue

  • Kimax, Narrow Mouth Solution Bottle With PTFE Stopper

    Kimble

    KIMAX bottles conform to ASTM E438, Type I, Class A glass. Bottle necks are ground to accept flathead color-coded PTFE stoppers. Replacement stoppers are 41941.

  • Wide Mouth Packer Bottles With Bagged Caps

    Kimble

    Wide mouth design makes it easy to add or remove contents Clear glass allows for easy viewing of contents Amber glass protects light-sensitive contents Type III soda-lime glass Six capacities: 1, 2, 4, 8, 16 and 32 ounces Choice of six liner styles

  • Clear Dropping Bottles with Standard Taper Pipet

    Kimble

    The dropper bottle is designed for general purpose use and for determining the oil absorption of pigments (ASTM D281). Provided with a medium length Standard Taper pipet dropper and a rubber nipple The 30 and 60 mL sizes are designed from Federal Specification A-A-5134 requirements …

  • Closure 15-415 0

    Kimble

    Closed top, linerless screw thread caps. Made of Polypropylene Economical, one-piece construction Unique design provides exceptional sealing properties Color: Natural GPI finish: 15-415 Autoclavable

  • KONTES/GUTH Unitized® Wash Bottles

    Kimble

    KONTES/GUTH Unitized® Wash bottles allow you to automatically pump a continuous, forceful jet of washing or rinsing liquid that may be instantly stopped as needed. Easy one-handed operation (either hand), leaving the other hand free for other needs Crystal clear glass flask permits…

  • Bulk Pack Clear Glass Medium Round Bottles

    Kimble

    Bottles come bulk packed in shrink wrapped with caps in bags Clear glass allows for easy viewing of contents Wide mouth design allows for efficient addition and removal of contents Easy-to-use, versatile storage for solids, liquids, powders and specimens Five capacities: 1, 2, 4, 8, and 16…

  • Weighing Bottles, Low Form With Glass Stopper

    Kimble

    Low Form, KIMAX® Brand (Kimble 15165) Of borosilicate glass, with Standard Taper glass stopper. Bottom part of stopper is sealed. Designed from Federal Specification NNN-B-1493. Dimensions indicated in table are i.d. x height without cap.

  • Hubbard Specific Gravity Bottle

    Kimble

    KIMAX bottle used in the determination of specific gravity for a large variety of semi-solid materials and emulsions, such as road oils, road tars, soft tar pitches, and asphalt cements (ASTM D70); drying oils, varnishes, resins, and related materials (ASTM D1963); water and brine (ASTM D1429); and…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.