3-in-1 combination meter Combines the functions of a Humidity Meter, Type K Thermometer, and InfraRed Thermometer for non-contact surface Temperature measurement Built-in InfraRed Thermometer for non-contact temperature measurement to 932°F (500°C) with 30:1 distance to target ratio Type K…

View giant size digits on your bench timer from across the lab. Visible from shelves, in hoods, or perched on instruments. Eliminates “squinting” to observe alarm time remaining. Giant-Digits with 1-1/3 inch digit height Viewable from 50 feet Countdown and alarms on single…

Ideal for measuring inside diameter, outside diameter and depth Stainless steel or carbon fiber models Zero at any point Switch between inches and millimeters NIST traceable Thomas Traceable digital calipers take length/diameter measurements three ways: outside, inside and…

Large, digital and easy-to-read from over twenty feet away One-inch high LCD digits help you monitor drying and incubation times Built-in alarm User can program two different activities from 24 hours to one second on portable countdown alarm timer Time-of-day and stopwatch (for counting up)…

Display 7/8" x 3/8" to 00.00 Press “min” and “set” together to reset Press “start/stop” to start and again to stop Press any key to stop alarm “Recall” feature returns automatically to preset time Displays up to 99 minutes…

Features three decibel ranges for greater precision Low decibel range: 35.0 to 80.0 dB; medium decibel range: 50.0 to 100.0 db; and high decibel range: 80.0 to 130.0 dB Resolution is 0.1 dB and accuracy is ±2 dB Unit provides weightings for both A and C frequencies to meet IEC 651 Type 2…

Digital temperature and speed displays External temperature control Closed-loop control Hot plate stirrers use microprocessor-controlled feedback technology to maintain consistent stir speed and temperature. Digital temperature display is adjustable in 5°C increments and indicates…

Large 3/4” display 24-hour capability Adjustable volume alarm Bright red, flashing light; can be used w/o sound to signal end of cycle Unique start/stop button for easy access Unit counts down in second increments. Loud alarm and flashing light command…

Set program in less than 5 seconds Two models Model 1 has an “on” interval setting of 0.01 to 99.99 seconds, 1 minute to 9999 minutes or 1 hour to 9999 hours. Model 2 has separate “on” and “off” interval settings of 1 second to 99 seconds, 1…

1 Channel plus memory Resolution is 1 second Accuracy is 0.01% Mini-Alarm Timer/Stopwatch can count up or down. Timing capacity is 99 hours, 59 minutes, 59 seconds. Device comes with easel stand and magnet. Timer/Stopwatch is provided with an individually serial numbered…

NIST Traceable® Certificate supplied 3/8” LCD digits for easy viewing Accurate to 0.01% Times two tests at once Two-Memory Timer delivers on-the-dot timing operations, whether counting up or down from 23 hours, 59 minutes, 59 seconds. Timer can be used as a time-of-day…

Measures up to 1832ºF with 50 to 1 distance to target ratio Laser pointer to identify target area Highest 50 to 1 distance to target ratio measures smaller surface areas at greater distances Widest Temperature range from -58 to 1832ºF (-50 to 1000ºC) Adjustable high/low alarm alerts user…

3 channels, plus memory Resolution is 1 second Accuracy is 0.01% Timing capacity: 99 hours, 59 minutes, 59 seconds to 1 second Clock is provided with an individually serial numbered Traceable® certificate from an ISO 17025 calibration laboratory accredited by A2LA. It indicates…

Water-, dust-, and shock-resistant Separate start/stop and reset buttons Split-mode timing to freeze split-time display Accuracy is 5 sec/day 1.5 V battery LCD 0.375" H display 1 min beep alarm Includes: Neck cord (46" L), 1.5 V button…

Air velocity ranges /resolution (see chart below for details) Accuracy is ±(1% full scale plus 1 digit) Temperature accuracy is ±0.8°C or 1.5°F Probe expands from 9 1/2 inches to 3 feet in length Features include minimum/maximum memory, data hold and Serial…

Traceable® Digital Stopwatch ( 8788T52) Precise, Traceable® timing for enzyme tests, viscosity measurements, animal studies, and other timed lab tests. Made for scientists in industrial, educational, hospital, and governmental labs who insist on the finest instrumentation.…

Fast, stable and accurate response Light Meter Lux 840006 Monitor light levels anywhere with fast, stable and accurate response. Results are easily read on t he extra large digits ( 7/8" high, 2 2mm) t hat also indicates w hen t he battery is low or the reading over range. The color and…

Automatically stores up to 16,000 readings or manually store/recall up to 99 readings Wide range to 40,000Fc or 400,000 Lux Cosine and color corrected measurements Utilizes precision silicon photo diode and spectral response filter Peak mode (10µS) captures highest reading Relative mode…

DC/AC Current True RMS Type K thermometer DC Zero Clamp-on multimeter with built-in non-contact InfraRed Thermometer Infared thermometer and rugged double molded housing Non-contact InfraRed Temperature measurements with laser pointer Peak hold captures inrush currents and Transients

Color correction filter Unit recalls highest, lowest and average readings Analog output for strip and chart recorders (0.1 millivolts per digit) Accuracy is ±(5% plus 2 digits) Ranges in Lux are 0 to 1999 (1 Lux resolution), 2000 to 19,900 (10 Lux resolution) and 20,000 to…

Easy-to-learn operation NIST Traceable® Certificate supplied Quartz-crystal accuracy to 0.01% Ideal QC (quality control) countdown and alarm timer combines easy, three-button operation with giant-size digits. Times may be set up to 20 hours in any minute increment. At zero, a 1-minute alarm…

Lightweight and disposable Sound confirmation every time a button is pressed NIST Traceable® Certificate supplied Accurate to 0.1% Ideal for easy-duty, occasional-use needs where high precision is not a requirement. Can be worn around the neck with the (included) 38” lanyard. Times to 24 hours…

Automatically switch equipment on or off up to 14 times a day Get accurate, reliable measurements with included NIST-traceable calibration Provides daily and weekly on/off control. Plug into any three-prong outlet. Minimum switching interval is one minute; maximum is 168 minutes.…

Detachable clip Accuracy: 0.001% Resolution: 0.01 second Timing capacity: 9 hours Timing functions include single-action, time in/out, continuous timing, cumulative split, interval split, 300 memories and repetitive programmable. Stopwatch is 3” x 2 1/2” x 7/8” and weighs 2.5…

Used for blood cell and corpuscle counts or wherever double counting is required Two registers each registers to 9999 Large, rectangular pushbuttons and zero reset knob on both sides Pushbuttons for the two independent registers are color-coded, and both sides are reset simultaneously…

Automatic timing option for simplified, accurate measurement of efflux times Microprocessor controls temperature between ambient and 240°C (464°F) Four-tube capacity Dual digital displays show setpoint and actual temperature °C/°F selectable Conforms to ASTM…

Air velocity ranges resolution (see chart below) Accuracy is ±(2% + 1 digit) Temperature accuracy is ±1°C Data hold feature Wind vane is 2 3/4” in diameter, 2 1/2” long and has a cable length of 4 feet. Unit measures 6 1/4” x 3” x 1…

NIST Traceable® Certificate supplied 6-digit 1/4” high LCD Convenient clip attaches timer to buttonhole, belt loop, notebook or keys Accurate to 0.01% The Traceable® Timer Plus is three timers in one: a countdown alarm timer, a stopwatch and a time-of-day clock. The…

3-5/8 inch high big digits for visibility from 25 feet Radio signal from NIST’s Colorado atomic clock automatically sets correct date/time; calendar displays month/date and day Temperature range: 32 to 113°F (0 to 45°C); resolution: 0.1° Relative Humidity range: 20 to…

Compact size Convenient portable size with wide temperature range measuring up to 1200°F (650°C) Adjustable High/Low setpoints with audible alarm alerts user when temperature exceeds the programmed setpoints Adjustable emissivity for better accuracy on different surfaces Built-in laser pointer…

6000 count LCD display Waterproof (IP67) rugged design for heavy duty use Rugged design — drop proof to 6 feet 1000V input protection on all functions Dual sensitivity frequency functions Dual sensitivity frequency functions Large backlit LCD with bargraph Duty Cycle function and Diode…

Ideal for multiple and simultaneous processes Two 1/100th second displays Counts up or down to 10 hours Available with NIST Traceable® certificate of compliance In stopwatch mode the current lap time is shown in the upper display, cumulative total in lower one. Memory stores last 8 lap times…