Equipment Ductwork

Page 1 of 2
  • Image of 45° Elbows

    45° Elbows

    45º PVC Elbows. Compatible with thermoplastic duct. Designed and engineered for quick installation and minimum pressure loss. Feature belled end connections to receive PVC duct directly.
  • Image of 90° Elbows

    90° Elbows

    90º PVC Elbows feature belled end connections to receive Thermoplastic Duct or Male Duct Coupling directly. Designed and engineered for quick installation and minimum pressure loss.
  • Image of Duct Couplings

    Duct Couplings

    PVC Duct Coupling connect two sections of Thermoplastic Duct.
  • Image of Exhaust Dampers

    Exhaust Dampers

    5165H59: Powder-coated steel Exhaust Damper, 6" diameter, in-line, adjustable. Allows for airflow adjustment to maintain proper airflow for remote blower or house exhaust systems. 1' equivalent resistance. 5165J25, 0516E55, 0516E98, 0516E97 & 0516G13: PVC Manual Duct Dampers allows you to balance...
  • Image of Exhaust Transition Adapters

    Exhaust Transition Adapters

    Lower Exhaust Transition Adapters are epoxy-coated steel, 2" x 10" rectangular to 5" or 6" diameter round for connection to 5" or 6" ID hose. Allows for connection of hose to the bottom of the rear plenum of the XPert Balance Enclosure, Protector XVS Ventilation Station, Protector Work Station or...
  • Image of HEPA Filter Packs

    HEPA Filter Packs

    HEPA Filter Pack. High Efficiency Particulate Air Filter for non-radioactive particulate applications. Rated for 1000 CFM airflow with initial 1.0" static pressure drop. Replaceable HEPA filter media removes 99.97% of all particulates 0.3 micron or greater. Includes clamping frame and duct...
  • Image of Carbon Filter Packs

    Carbon Filter Packs

    Carbon Filter Pack. Activated Carbon Filter for non-radioactive organic vapors and odor control. Rated for 1000 CFM air flow with 0.2" static pressure drop. Dimensions: 28" W x 28" L x 25" H.
  • Image of Flexible Duct Connections

    Flexible Duct Connections

    Reduce vibration between the blower and PVC ductwork. Include two clamps for easy installation.
  • Image of Spiral Tube

    Spiral Tube

    Corrosion-resistant, neoprene-impregnated fiberglass reinforced with steel wire. Include rigid duct connector and two clamps. Because this ductwork is flexible and may conform to various configurations, it is not possible to know the precise equivalent resistance.
  • Image of PVC T & Y Connections

    PVC T & Y Connections

    PVC fitting compatible with thermoplastic duct. End connections receive PVC pipe directly. 0516E96 - PVC "T" Connection: Duct Diameter: 10" Duct Diameter: 12" Duct Connection Diameters: 10" x 10" x 12" Height: 19" Equivalent Resistance in feet of Straight Duct: 20' 0516A84 - PVC "Y" Connection:...
  • Image of Thermoplastic Ducts

    Thermoplastic Ducts

    PVC exhaust duct is Type I, unplasticized, schedule 40, lightweight and corrosion-resistant. A Female Duct Coupling is required to join two sections.
  • Image of Thermoplastic Duct Reducers

    Thermoplastic Duct Reducers

    PVC coupling type reducer designed for connecting thermoplastic duct of different diameters with no equivalent resistance.
  • Image of Wash Rings

    Wash Rings

    Wash Ring, wide angle conical spray nozzle, and wash water connection nipple are fabricated into a PVC coupling. For Stainless Steel or PVC Perchloric Acid Hoods. 10" Diameter Flow rate is one gallon per minute at 40 psi. 12" Diameter Flow rate is 0.70 gallons per minute at 20 psi.
  • Image of Zero Pressure Weathercaps

    Zero Pressure Weathercaps

    Made of strong, corrosion-resistant PVC. Caps fit atop standard PVC duct, permits vertical discharge of effluent air above roofline for dispersion away from the building. Caps add little static pressure to the exhaust system.
  • Image of Blower Transition Adapters

    Blower Transition Adapters

    Epoxy-coated Steel Blower Transition Adaptors allow you to connect thermoplastic duct to the exhaust side of a blower to create an exhaust stack. Nominal size PVC duct fits inside the adaptor opening.
  • Image of Duct Outlet Valve

    Duct Outlet Valve

    Item #: 0515Y09
    Quick connect fitting joins Flexible Exhaust Duct to wall or Duct Inlet Valve.
Page 1 of 2