Our largest mill, designed specifically for the reduction of analytical laboratory samples
• Moving parts are totally enclosed
• 7 3/4” diameter milling chamber - 141 cu. in.
• 2 1/4” diameter sample input
• 50 to 1,000 gram sample volume
• Single speed - 800 rpm at 60 Hz or 667 rpm at 50 Hz
• All steel construction
• CE Mark model available
Features of the Model 4:
Shearing Action: The four adjustable hard tool steel knives are bolted to a removable rotor. These knives work against six stationary knives bolted into the frame. The shearing action tends to avoid changes in the sample due such temperature rise, moisture loss, liquefaction, contamination, etc. caused by crushing and abrasion methods. The clearance of opposing knives is precisely adjusted for shearing clearance. Each stationary knife is independently adjustable. The fan effect of knives provides increased through-put and quick clearing of the chamber.
Grinding Chamber: The steel chamber measures 197 mm inside diameter x 76 mm deep. The hinged, heavy steel plate door provides full access to the chamber for cleaning. The clamping bolt with handwheel seals door against mill face. The neoprene shaft seal at rear of chamber prevents lubricant from seeping in while also protecting the ball bearings of the rotor shaft from sample dust.
Knives: The inlaid edges are specially formulated tool steel, tempered and hardened for durability and optimal cutting. Knife body is made of softer steel to absorb shocks and minimize breakage. Stainless steel knives are also available for milling corrosive materials.
Hopper: Steel hopper with enameled exterior finish is mounted to the top of grinding chamber with two thumbscrews. Capacity is approximately 550 mL. Includes a tight-fitting lid. Sliding stainless steel plate at base of hopper controls feeding rate. Dimensions: 41/2” top internal diamter x 21/4” throat internal diameter x 81/2” depth.
Sieves: Stainless steel, curved round-hole screens are shaped to fit against the top of the delivery chute block so that samples cannot enter chute without passing through the screen. The chute block is released by two handwheels for easy interchanging of sieves.
Receivers: Adapter chutes slide into a spring-loaded holder beneath the chute block to collect product in a glass jar or stainless steel beaker. The two chutes included with the mill can be interchanged without opening mill door. Clearance below chute is 140 mm to base of bench models, permitting the use of standard receivers even if mill is placed back from edge of bench. Clearance below chute of stand mounted mills is 495 mm.
Jar Chute: Threaded to take standard Mason glass jars, up to 2 qt. (1.8 L) capacity. Jars permit observation of finished product, as well as affording convenience for storage of samples. A bag or sack can be tied on in place of the jar.
Beaker Chute: 105 mm i.d. x 146 mm deep, without spout. Spring-loaded runners hold turned rim of beaker securely against adapter plate to prevent sample loss, while allowing easy removal of beaker. Takes 1,200 mL stainless steel beaker (1527C25).
Drive Unit: Mounted in enameled steel housing directly behind the grinding chamber. Motor is a 1 hp, continuous duty, enclosed ball-bearing type, equipped with thermal overload cutout and needing no lubrication for years. Safety switch prevents operation when the chamber is open. Provides rotor speed of 800 rpm at 60 Hz and 667 rpm at 50 Hz. Pulley drive uses a 16 mm V-belt. Rotor shaft ball bearings require lubrication by means of grease gun included with mill.
For Bench Mounting
Provided with four mounting lugs for bolting to bench, or for attachment of 3375E90 Runners (not supplied)
Includes jar and beaker chutes, three sieves (1/2, 1 and 2 mm), one stainless steel beaker(1527C25), three 1 pint (0.47 L) glass jars (6176B12), set of wrenches, one grease gun and 1 lb. (0.45 kg) of grease.
Overall dimensions 15" W x 24"D x 28"H (381 x 610 x 711 mm); shipping weight: 375 lbs. (170 kg); net weight: 301 lbs. (136.5 kg). Units require 8.4 amps on 115 V, 4.2 amps on 230 V. For replacement belt see Thomas number 3376T80.
|
Thomas P/N#
|
Manufacturer P/N#
|
Short Description
| Price
| QTY |
| 3375E15 | T4274E15 |
WILEY MILL, Model 4 Bench, 1 HP, 115V, 50/60 Hz
|
$14,959.59 | |
| 3375E25 | T4274E25 |
WILEY MILL, Model 4 Bench, 1 HP, 230V, 50/60 Hz
|
$14,904.51 | |
| 1233X15 | T4274CE |
Wiley Mill, Model 4, 1 HP, CE Mark, 230 V, 50/60 Hz
|
$17,496.00 | |
|
 |
| |  |
| 3375E81 Stand with Model 4 Mill |
|
|
|
With Floor Stand
• Heavy channel stock steel construction
• Smooth rolling casters
• Accessory shelf
Welded, rugged steel construction guarantees years of reliable use. Stand is mounted on four independent locking, smooth-rolling casters for easy mobility and transport. Accessory shelf is constructed of heavy aluminum and includes rubber mat. Overall dimensions
(W x D x H, in.): 20 x 26 x 49;
Shelf dimensions (W x D x H, in): 13.8 x 15.9 x 1.8. Dimensions of 3375E81 Floor Stand (W x D x H, in.): 20 x 25 x 23.
|
Thomas P/N#
|
Manufacturer P/N#
|
Short Description
| Price
| QTY |
| 3375E45 | T4274E45 |
WILEY MILL, Model 4 Floor, 1 HP, 115V, 50/60 Hz
|
$16,147.46 | |
| 3375E55 | T4274E55 |
WILEY MILL, Model 4 Floor, 1 HP, 230V, 50/60 Hz
|
$16,092.50 | |
| 3375E81 | T4274.E81 |
FLOOR STAND w/CASTERS
|
$2,161.86 | |
|
Replacement Motors
|
Thomas P/N#
|
Manufacturer P/N#
|
Short Description
| Price
| QTY |
| 3375P53 | 7163 |
MOTOR, 120V, 50/60 Hz, 1 Phase, 1 HP, For 3375E15, E45 and E70
|
$1,155.98 | |
| 3375P55 | 7163 |
MOTOR, 230V, 50/60 Hz, 1 Phase, 1 HP, For 3375E25, E55 and E70
|
$1,155.98 | |
|
ACCESSORIES
RUNNERS, BENCH LEGS
• For attachment to Mills 3375E15, E25 and E70, to provide stability without bolting to bench
• 24 inches long and 2.75 inches high, on rubber feet, includes bolts for mounting
REVOLVING KNIFE SETS
• For replacement of rotor knives on Wiley Model 4 Mills; suitable also for former models 1, 2 and 3 mills
• Sold in matched sets of four to ensure uniform distance of cutting edges from center of rotor
3375F10 Knives, with inlaid edge, hardness 58-60 HRC, are same as regularly furnished on the mills; 3375F15 Knives, for corrosive conditions, are type 440-C stainless steel, hardness 60 HRC and are slightly magnetized. Under normal conditions, the hardened tool steel edges of 3375F10 Knives remain sharp considerably longer.
STATIONARY KNIVES
• For replacement of the frame-mounted knives in Wiley Model 4 Mills (knives for former models 1, 2 and 3 are listed under 3376T70 and T75)
3375F20 Knife has durable inlaid edges of hardened tool steel, as regularly furnished on the mills; 3375F25 Knife is stainless steel, for use in conjunction with 3375F15 Revolving Knife Set.
SIEVES
• Curved screens, of stainless steel Type 304, with round perforations of diameter indicated
• Usable interchangeably in Wiley Model 4 Mills, which regularly include sizes 1/2, 1 and 2 mm
REPLACEMENT PARTS
3376T70 Knives have inlaid cutting edge of hardened tempered tool steel, used in conjunction with 3375F10 Revolving Knife Set. 3376T75 Knives are stainless steel, slightly magnetized, used in conjunction with 3375F15 Revolving Knife Set.
|
Thomas P/N#
|
Manufacturer P/N#
|
Short Description
| Price
| QTY |
| 3376T70 | T4275-B01 |
KNIFE, Stationary, Ea.
|
$291.54 | |
| 3376T75 | T4275-B05 |
KNIFE, Stationary, Stainless, Ea.
|
$570.47 | |
| 3376T80 | 4284.1 |
REPLACEMENT BELT
|
$37.46 | |
| 3376T85 | TP4274E70510A |
REPLACEMENT HOPPER, Model 4
|
$1,451.87 | |
| 3376T90 | TP4274E70164 |
REPLACEMENT PLUNGER, Model 4
|
$82.60 | |
| 3376D50 | T3376-D50 |
MICRO SWITCH
|
$884.86 | |
| 3376C35 | T4275-C36 |
SS SIEVE, 1/2 mm
|
$1,040.94 | |
| 3376C40 | T4275-C41 |
SS SIEVE, 1 mm
|
$1,040.94 | |
| 3376C45 | T4275-C46 |
SS SIEVE, 2 mm
|
$1,040.94 | |
| 3376C50 | T4275-C51 |
SS SIEVE, 3 mm
|
$1,057.50 | |
| 3376C55 | T4275-C56 |
SS SIEVE, 4 mm
|
$1,057.50 | |
| 3376C60 | T4275-C61 |
SS SIEVE, 5 mm
|
$1,006.35 | |
| 3376C65 | T4275-C66 |
SS SIEVE, 6 mm
|
$992.16 | |
|
