Lab Wash Bottles
-
Wide Mouth Unitary Wash Bottles
Thermo Scientific NalgeneDesign eliminates contamination and mismatching of delivery spouts when refilling bottles Made of lower density polyethylene with wide mouth and polypropylene screw cap Delivery tube is molded into bottle wall with inlet at lower-most position in bottle Spout emerges from shoulder rather than…
-
Right-to-Know Safety-Labeled Wash Bottles feature a wide mouth 53mm (2") for easy refilling. Bottles are pre-printed with the Chemical name and formula, the National Fire Protection Association (NFPA) Section 704 Four-color Diamond, health hazards, Chemical Abstract System (CAS) number, and…
-
Extra fine needle point spray Easy-to-squeeze, low-density polyethylene Can be labled with Tech Pens; see part number 1222X42-X49
-
Wide mouth GHS wash bottles featuring the patented DripLok® vapor venting valve that prevents solvent drips Custom write-on wash bottles are printed in English only for 250 and 500mL and 3 languages for 1000mL (English, French, German) Choose from four solvent labels, all including the…
-
POLYETHYLENE PLASTIC 250ml wash bottle made of flexible, premium quality polyethylene plastic INDUSTRIAL QUALITY High chemical durability & moderate heat tolerance. Can withstand temperatures between -50°C and 80°C. Good resistance to acids, alcohols and bases FLEXIBLE DELIVERY TUBE Wash…
-
Safety-Labeled Wide Mouth Wash Bottles
Heathrow ScientificThese bottles are labeled to show what goes in the bottle. The closure and stem are molded in one piece to make them leak proof. The angled neck and tip provide a uniform stream of liquid and the tip can be cut back if required to increase the flow. Non-metallic vent that prevents the risk of…
-
Plasticware Starter Kit
United Scientific SuppliesA customized plasticware assortment that is designed for general laboratory use. This kit offers the following: set of 5 beakers (50, 100, 250, 500, & 1000ml), Graduated cylinder set of 4 (10, 25, 50, & 100ml), 250ml Wash Bottle, 500ml Wash Bottle, 250ml PP Narrow Mouth Reagent Bottle, 500ml PP…
-
Color-Coded Unitary Wash Bottle
Thermo Scientific NalgeneWide mouth for easy filling Holds up to 500 mL of liquid Convenient, built-in dispenser won't get lost or contaminated when refilling. Comes as pre-packaged, color-coded assortment with one each: red, blue, white and yellow caps. Custom right-to-know labels included.
-
1000ML 1000ml isopropanol wash bottle made of low density polyethylene (LDPE) WIDE MOUTH Features a wide mouth for easy filling and a yellow color-coded screw cap for easy identification SELF VENTING Designed to be self venting to eliminate leaks and dripping EASY TO READ Label…
-
Pack of six Ethanol wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping. White screw cap for easy identification Easy to control squeeze for…
-
Thomas® Exclusive- 5 Pack Economical No need to buy large quantities Color-coded: 5 colors 250 and 500 mL No need to buy 5 or 6 of each color to get a selection of colors. These low density polyethylene wash bottles are versatile and easy to use. The color-coded…
-
Pack of six Sodium Hypochlorite (Bleach) wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) Blue color coded…
-
Chemical wash bottle with blank labels, 500ml capacity Blank label provides maximum flexibility, allowing user to write in contents and safety information Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics…
-
500ML Pack of 6 500ml acetone wash bottles made of low density polyethylene (LDPE) WIDE MOUTH Feature a wide mouth for easy filling and a red color-coded screw cap for easy identification SELF VENTING Designed to be self venting to eliminate leaks and dripping EASY TO READ Labels…
-
Pack of six Distilled Water wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping. Transparent screw cap for easy identification Easy to control…
-
-
Wash Bottles
DynalonThese stylish sloped shoulder wash bottles feature an acute angled "swan neck" dispensing spout. Maximum temperature of low-density polyethylene is 80°C. Washbottle 250 ML Water (1210A92 ) Product Dimensions (l x w x h) : 0x2.153x8.625in Printed with a water…
-
500ml capacity Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Performance plastic with flex ink. Ink won't fade, crack or peel.…
-
Pack of two Distilled Water wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) Clear screw cap for easy…
-
Meet the latest requirements of GHS & OSHA HAZCOM 29 CFR 1910.1200 for workplace labels Safety vented Patented DripLok® valve prevents dangerous solvent drips The specially designed jet-tip provides precise dispensing control
-
Wide-Mouth; Eliminates Dangerous Drips A unique, 2-piece valve prevents pressure build-up of solvents within these Right-to-Know Safety-Labeled Wash Bottles. Volatiles are vented eliminating solvent drips. They are pre-printed with the Chemical name and formula, the National Fire Protection…
-
Wide Mouth Unitary Safety Wash Bottles
Thermo Scientific NalgeneBottle is safety red for easy identification of special contents Low-density polyethylene For use with acids, alcohols and bases Tubulation and bottle are molded in one-piece to prevent contamination Wide mouth design for faster, easier filling Linerless, 38 mm polypropylene closure Bottle…
-
Red Wash Bottles
SP Bel-ArtHigh visibility, red color helps to alert user of hazardous contents. Low density, polyethylene with polypropylene closure.
-
Wash Bottles, LDPE/PP Caps
CorningThese bottles are manufactured from low density polyethylene and are offered with a narrow or widemouth. The cap and dispensing tube are manufactured from PP to optimize backflow of the solution. The design allows minimal turbulence of the liquid in the bottle.
-
Two pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Pack of two chemical wash bottles made with Eisco Labs…
-
Pack of six Ethanol wash bottles, 1000ml capacity each Easy to read labeling, including chemical information and safety warnings (1 color) Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Made of low density polyethylene (LDPE) White color coded screw cap for easy…
-
Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (4 colors) Self venting design Made of low density polyethylene Color coded screw cap for easy identification (4 colors) Pack of six chemical wash bottles made with Eisco Labs…
-
Six pack Wash Bottles, 500ml capacity each Easy to read labeling, including chemical information and safety warnings (2 colors) Self venting design Made of low density polyethylene Color coded screw cap, nozzle & chemical information for easy identification Pack of six chemical wash bottles…
-
Low-density polyethylene wash bottles offer different colors of polypropylene closures for quick, at-a-glance identification of contents. Choose from Natural, Red, Yellow, Blue or Green caps.
-
Unitary Wash Bottles
United Scientific SuppliesThe red color of these wash bottles provides a visual indicator that they may contain hazardous liquids. Constructed of low density polyethylene, these bottles include a built-in delivery tube.
-
Unlabeled chemical wash bottle, 250ml capacity Wide Mouth for easy filling. Self venting design to eliminate leaks & dripping Easy to control squeeze for dispensing Performance Plastics by Eisco Labs Superior quality low density polyethylene (LDPE) construction with long lasting strength.…
-
Safety Wash Bottles
Thermo Scientific NalgeneWith color closure Nalge 2422 Leakproof; 500 mL capacity Molded in translucent LDPE with polypropylene color closure