Viscosity Standards

Page 1 of 1
  • Image of Cold Cranking Simulator Viscosity Standards

    Cold Cranking Simulator Viscosity Standards

    Conform to SAE specification J300 and ASTM D 5293 Viscosities based on NIST value of 1.0016 centipoise for water at 20°C Traceable to NIST Supplied in one pint bottles
  • Image of General Purpose Viscosity Standards

    General Purpose Viscosity Standards

    Based on NIST value of 1.0016 centipoise for water at 20C; conforms to ASTM Standards D 445, D 88 and D 2161; traceable to NIST Approximate viscosities at varying temperatures in centistokes and centipoises are given in Table 1; each standard is furnished with actual viscosity and density values....
  • Image of High-Temperature Viscosity Standards

    High-Temperature Viscosity Standards

    For use with Cannon High Temperature/ High Shear Viscometers for measurements at 150°C and 10 -6 s -1 shear rate Based on NIST value of 1.0016 centipoise for water at 20°C; traceable to the NIST In accordance with ASTM Standard D 4624 9727U92 and U94 are non-Newtonian reference standards...
  • Image of High Viscosity Standards

    High Viscosity Standards

    For determining viscosities in asphalt and polymers (see ASTM D 2170 and D 2171) Traceable NIST For Kinematic Viscosity Values (cSt), please contact Thomas Scientific
  • Image of Ink and Paint Viscosity Standards

    Ink and Paint Viscosity Standards

    For ink and paint viscometers For use with Zahn, Shell and Ford viscometer cups. Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate kinematic viscosity and drain times for the various cups at 25°C are given in table. Actual values are furnished with each...
  • Image of Low-Temperature Viscosity Standards

    Low-Temperature Viscosity Standards

    For determining the viscosity of low-temperature gear oils and ATF fluids (see ASTM D 2983) Traceable to the NIST Viscosity 150,000 cP at temperature indicated in table below Offered in one pint bottles
  • Image of Paint Viscosity Standards

    Paint Viscosity Standards

    For Thomas®-Stormer® Viscometers Based on NIST value of 1.0016 centipoise for water at 20°C. Traceable to NIST. Approximate viscosity in centipoise and Krebs unit values at 25°C are given in table below. Actual value are furnished with each standard. Supplied in a one pint bottle.
  • Image of Silicone Viscosity Standards

    Silicone Viscosity Standards

    For calibration of rotational viscometers Viscosity certified at 20, 23, 24, 25, 26 and 27°C Calibrated to a precision of ±0.2% NIST traceable Standards are based on the National Institute of Standards and Technology (NIST) value of 1.0016 mPa-s (centipoise) for water at 20°C...
  • Image of Viscosity Standard, -20 and -25°C for CMRV, 500 ml

    Viscosity Standard, -20 and -25°C for CMRV, 500 ml

    Item #: 9727T10
    For preceding the borderline pumping temperature of engine oil in accordance of ASTM Standards D 3829 and D 4684 Viscosity of 30,000 centipoise at -20°C based on NIST value of 1.0016 centipoise for water at 20°C; traceable to NIST
  • Image of Viscosity Std, 10 cSt

    Viscosity Std, 10 cSt

    Item #: C997D36
    Viscosity Std, 10 cSt 500 mL
Page 1 of 1