Trays

Page 1 of 3
  • Image of Scienceware® Autoclavable Polypropylene Trays with Cover

    Scienceware® Autoclavable Polypropylene Trays with Cover

    With slightly tapered sides Cover has recessed bottom that extends approximately 11 mm into tray Listings indicate length x width at bottom x usable depth Excellent for storing, transport and sterilization of instruments Autoclavable
  • Image of Autoclavable Polypropylene Utility Trays

    Autoclavable Polypropylene Utility Trays

    Heavy-duty for repeated autoclaving of small instruments and labware With tapered sides, rounded corners and strong rims Stackable
  • Image of Scienceware® Beaker, Flask or Jar Tray

    Scienceware® Beaker, Flask or Jar Tray

    Item #: 1226D24
    14 x 17" polystyrene trays fit standard lab bench drawers and are ideal for organizing a variety of items. Features 20 wells of various diameters to hold containers up to 9.8cm (3-7/8") diameter. Perfect for flasks and beakers up to 600ml. Sold per each.
  • Image of Chemware PFA Trays

    Chemware PFA Trays

    For use with corrosive materials Chemically-resistant PFA Can be used as sterilizing trays or corrosive and solvent baths Model 9472M78 has a cover which prevents evaporation and is ideal for staining 25 x 75 mm microscope slides.
  • Placeholder Image for Electrophoresis Fixing Trays

    Electrophoresis Fixing Trays

    Conveniently fix or destain gels. These fixing trays let the user conveniently fix the gel, drain the fixing solution and then set the filter paper on the gel in the tray. The solution is conveniently recyclable and can be re-used again. The trays may also be used in electrophoresis gel...
  • Placeholder Image for Scienceware® Petri Dish Incubation Trays

    Scienceware® Petri Dish Incubation Trays

    Item #: 1226C56
    Epoxy-coated steel tray holds four 100mm petri dishes securely on an incubator rack. Excellent for keeping cell cultures organized; holes in the bottom allow air to circulate. 13-3/4 x 5-3/8 x 7/8" H (34.9 x 13.7 x 2.2cm) Steam autoclavable.
  • Image of Polyethylene Utility Trays

    Polyethylene Utility Trays

    High-density polyethylene with rolled rim, rounded corners and tapered walls for nesting Four lugs on each end prevent jamming when nested Hand wells are provided for carrying. Dimensions at top rim: 24.5” x 19”; at bottom: 15.5” x 20.5”; height: 9.5”.
  • Image of Polyethylene Utility Trays

    Polyethylene Utility Trays

    High-density polyethylene with rim, carrying handles and tapered walls for nesting 9472B30: 10 quart capacity 9472B40: 15 quart capacity Listings show length x width x depth in inches.
  • Image of Polypropylene Utility Trays

    Polypropylene Utility Trays

    With rolled rim, rounded corners and tapered walls for nesting Autoclavable 9472C55 tray has a 10 quart capacity; 9472C61 tray has a 15 quart capacity
  • Image of PYREX Glass Trays

    PYREX Glass Trays

    Heavy wall Tray dimensions shown are top length x top width x depth, in inches Flat-bottom PYREX; ideal for staining, drying or developing gels Thinner-wall version of the 9473N30 Tray Autoclavable to 121°C (250°F) Available in four sizes
  • Placeholder Image for Scintillation Vial Tray

    Scintillation Vial Tray

    Item #: 1226D25
    Scintillation Vial tray protects and organizes. Measures 36 x 43 cm (14 x 17"). Molded from polystyrene for lightweight and easy cleaning. Sized to fit in standard lab bench drawers.
  • Image of Sterilizing Tray with Cover

    Sterilizing Tray with Cover

    Autoclavable polypropylene, with tapered sides Cover has hand grip at center; skirted edges fit into groove molded into flanged top of pan Can be stacked when cover is in place Dimensions shown are length x width x depth.
  • Image of Scienceware® Thermometer Tray

    Scienceware® Thermometer Tray

    Item #: 1226D26
    36 x 43cm (14 x 17") polystyrene trays fit standard lab bench drawers and are ideal for organizing a variety of items. 14 lengthwise rests protect, store and keep thermometers and other long, fragile instruments organized and accessible. Rest are interrupted by deeper compartments which make...
  • Image of Utility Carrier Tray

    Utility Carrier Tray

    Nalgene® 7130 Of high-density polyethylene Divided lengthwise by fixed central partition with molded handle Dimensions shown are length x width x depth.
  • Image of Utility Trays

    Utility Trays

    Stainless steel trays Rounded corners, slightly tapered sides and flared rims Models 9471M29, M43 and M61 trays are shallow type Covers are flat with skirted perimeter and handle mounted flush with top except for 9471M76 and M94 which are domed with raised handles. Covers are not available for...
  • Placeholder Image for Scienceware® Tray with Faucet

    Scienceware® Tray with Faucet

    Item #: 0209T00
    Low density polyethylene trays and pans are rugged, long-lasting and corrosion resistant. Made with heavy walls and wide, top flanges, they will withstand temperatures up to 77°C (171°F). Needle type polyethylene faucet with 12.7mm (1/2") bore.
Page 1 of 3