TLC Plates

Page 1 of 2
  • Image of Baker-flex® Coated TLC Silica Gel Sheets

    Baker-flex® Coated TLC Silica Gel Sheets

    Ready-to-use plastic sheets, 50 x 200 mm or 200 x 200 mm, with absorbent coating, which is abrasion-resistant and highly uniform; are easily cut to desired size and allow sample fraction to be cut rather than scraped The silica gel and aluminum oxide sheets have coating approximately 200 microns...
  • Image of Baker-flex® Coated TLC Aluminum Oxide Sheets

    Baker-flex® Coated TLC Aluminum Oxide Sheets

    Ready-to-use plastic sheets, 50 x 200 mm or 200 x 200 mm, with absorbent coating, which is abrasion-resistant and highly uniform; are easily cut to desired size and allow sample fraction to be cut rather than scraped The silica gel and aluminum oxide sheets have coating approximately 200 microns...
  • Image of TLC Plate K5F 10 X 20cm

    TLC Plate K5F 10 X 20cm

    Item #: 1229X40
    Partisil K6 60Å and K5 150Å TLC plates provide a choice of high-purity silica gels with polarity for normal phase separations. They provide enhanced performance compared to silica gel 'G' through better resolution, higher sensitivity and more durability. Moderate layer hardness makes possible...
  • Image of Partisil K6 60 Adsorption TLC Plates

    Partisil K6 60 Adsorption TLC Plates

    Chemically and optically inert organic binder Aggressive reagent resistance Fast separation with excellent resolution Separate moderately to strongly polar compounds Fluorescent indicators Partisil TLC plates provide a choice of high-purity silica gels and polarity for normal phase separations....
  • Image of Diamond TLC Plates

    Diamond TLC Plates

    Highly reflective surface minimizes background noise Uniform particle size and distribution Fluorescent indicators Diamond Series Thin Layer Chromatography plates facilitate dripping and spraying and will not crack or flake. A highly reflective surface minimizes background noise while scanning for...
  • Image of Flexible TLC Plates

    Flexible TLC Plates

    Economical and convenient Easy to customize Aluminum or polyester backing Silica gel 60 Å flexible plates come in a single 20 x 20 cm size and are designed for economy and convenience. Plates can be cut with scissors to match individual separation requirements, making them useful for applications...
  • Image of PTLC Plates

    PTLC Plates

    Highly purified silica gel 4 x 20 cm concentration zone TLC plates utilize a highly purified silica gel tht eliminates contamination of samples. Narrow particle size range reduces band spreading. Uniform layer thickness minimizes diffusion and enhances recovery of minute fractions. Silica gel...
  • Placeholder Image for TLC Plates

    TLC Plates

    Item #: 1233J33
    10 x 20 cm
  • Image of Glass TLC Plates

    Glass TLC Plates

    For thin layer and preparative layer chromatography Ready-to-use Layer thickness 0.25 mm Allow safe spotting without layer damage Plates have a uniform, abrasion-resistant coating and a patented, inert, hard-layer binder that is chip and abrasion-resistant. F254 is a fluorescent indicator with a...
  • Image of Baker-flex® Coated TLC Cellulose Sheets

    Baker-flex® Coated TLC Cellulose Sheets

    Ready-to-use plastic sheets, 50 x 200 mm or 200 x 200 mm, with absorbent coating, which is abrasion-resistant and highly uniform; are easily cut to desired size and allow sample fraction to be cut rather than scraped The silica gel and aluminum oxide sheets have coating approximately 200 microns...
  • Image of Pre-Coated Glass Hard Layer Silica Gel TLC Plates

    Pre-Coated Glass Hard Layer Silica Gel TLC Plates

    Vacuum-sealed plates exclude moisture and have a convenient hard surface for writing Silica gel with inert binder Each channel is approximately 8 mm wide with 1 mm spacing between channels Plates have 250 µm analytical layer, except for 0144K71 plates which have a 200 µm analytical layer. 2739D50...
  • Image of Rectangular Developing Tank

    Rectangular Developing Tank

    Item #: 2739J60
    Beveled inside and outside to remove any sharp edges Raised ridge midway on the inside ends and bottom for developing two 20 x 20 cm plates or the equivalent Inside dimensions: 27 x 7 x 26 cm Supplied with flat glass lid, 30 x 10 x 3 cm Molded glass block of clear glass with flat surface walls,...
  • Image of Latch-Lid Chromatotank Unit

    Latch-Lid Chromatotank Unit

    Item #: 2739J65
    Clear glass sides allow unobstructed visual inspection of contents Tank is ground flat to match ground glass lid. Beveled inside and outside to remove any sharp edges. Holds two 20 x 20 cm plates or four 10 x 20 cm plates. Latching device holds the matching ground glass surfaces of the lid and tank...
  • Image of 10 cm Developing Tank

    10 cm Developing Tank

    Item #: 2739J70
    Flat ground top is beveled on the inner and outer rim Ground flat bottom for stability Holds two 10 x 10 cm plates or four 5 x 10 cm plates Thin-Line units allow for faster and more uniform solvent saturated atmosphere and therefore require less solvent. Inside dimensions: 12 x 6.4 x 11.5 cm.
  • Image of 10 cm Latch-Lid Chromatotank

    10 cm Latch-Lid Chromatotank

    Item #: 2739J75
    Requires less solvent to maintain equilibrium Gives excellent retention of solvent saturated chamber Holds two 10 x 10 cm plates The smaller cubic inch chamber allows for a faster and more uniform solvent-saturated atmosphere. Single molded tank has a flat ground top, beveled for safety on the...
  • Image of TLC Developing Tank

    TLC Developing Tank

    Item #: 2739J77
    Constructed of sturdy molded glass bricks Withstands regular use for many years The tank’s clear sides allow for visual inspection of TLC plates up to 20 x 20 cm size. The top of the tank is ground flat to match the lids and the edges are beveled to remove any sharp edges. The bottoms are...
Page 1 of 2