Glass Joints

Page 1 of 1
  • Image of Adapter, Flow Control Inlet

    Adapter, Flow Control Inlet

    Stopcock available with glass or PTFE plug For regulating the flow of gases or liquids into reaction systems. Adapter consists of male standard taper joint fittng with stopcock and a 90° angle male hose barb. Thomas numbers 5738D01, D03, D15, and D17 take 1/4" i.d. flex tubing; Thomas numbers...
  • Image of Glass Joints

    Glass Joints

    Pyrex Standard Taper Connecting Tubes (5738E14) Arms are approximately 75° apart Equipped with inner Standard Taper joints that are both 24/40 Often used as a still head adapter Still Head Standard Taper Connecting Tubes (5738H82 and L18) Sidearm is at an angle approximately 75° from the...
  • Image of Inlet Hose Adapter

    Inlet Hose Adapter

    Ideal for use as a vent or for the introduction of pressure/vacuum Glass male Standard Taper joint with hose barb for tubing at 90° angle Thomas numbers 5737A01 and A03 take 1/4” tube fitting; others are 3/8”.
  • Image of Joint Adapters

    Joint Adapters

    Item #: 5734L28
    With Standard Taper inner member at bottom and plain neck, 7.8 mm minimum i.d. Neck has sleeve-cap fitting with flexible rubber collar 5.5 mm i.d. which seals thermometer or bleed tube
  • Image of Joint Adapters

    Joint Adapters

    Standard Taper Reducing, Bushing type Useful for attaching thermometers PYREX® bushing adapters are fabricated with heavy walls for mechanical strength and are further strengthened by the heavy, uniform rim at the top which affords a serviceable finger grip. These adapters are shorter than the...
  • Image of Luer Adapter

    Luer Adapter

    Helps reduce cross contamination Size 1 hose connection Popular joint sizes Easy sample concentration and clean up Kontes luer adapter converts standard taper glassware to a luer joint. Adapter is available in most popular joint sizes and includes an integral vacuum connection. Adapter use a female...
  • Image of Standard Taper Joint Adapters

    Standard Taper Joint Adapters

    PYREX® Standard Taper Enlarging (5732E35 to E50) With outer Standard Taper joint at top and smaller inner Standard Taper joint at bottom 5732E35 adapter is 100 mm long; 5732E47 and E50 are 105 mm long Listings give top joint size to bottom joint size PYREX® Reducing (573D34 to E49) With outer...
  • Image of Scienceware® Teflon® Sleeve Gaskets

    Scienceware® Teflon® Sleeve Gaskets

    For standard taper joints Knurled gripping-ring at top, which allows quick, simple removal from joint Easily cleaned For use with full or medium joints Three gaskets per package. Joint size given in listings below.
Page 1 of 1