Lab Filtration Products
Among these essential products, glass filter discs are ideal due to their ability to withstand high temperatures and corrosive materials, which makes them suitable for complex filtration tasks.
Glass microfiber filters offer high retention efficiency, which is particularly useful for capturing fine particulates. Gas dispersion tubes provide adequate and uniform distribution for gas and liquid applications, essential in chemical experiments.
Syringe filters are another critical component, offering a convenient and fast solution for sample purification and particle removal. Their varying pore sizes, like 22-micron filters, cater to specific filtration requirements. The range also includes fritted filter disks, known for their robustness and efficiency, microfiber filters for high-capacity filtration, and lab filter papers for general-purpose filtering.
Accompanied by filter holders and membrane filters, these products collectively improve the accuracy and efficiency of laboratory work. By exploring this extensive range of lab filtration products, laboratories can significantly improve their analytical precision and process efficiency.
-
Filter, Disk, PTFE,LAM, 1.0µm, 142mm, 25/Pk
GVS Filter TechnologyPTFE allows air to pass easily through the membrane while collecting particulate as small as 0.1 micron on its surface. PTFE membranes provide device manufacturers with a consistent, temperature and chemical compatible barrier to microbes and particulate matter. The optimal combination of air flow…
-
Qualitative Filter Papers, Grade 961, Wet-Strengthened
Ahlstrom-MunksjoQualitative analysis Low ash content 0.06% Untreated Consistent performance Wet-strengthened grades available Custom cut Bulk packaging For use in analytical methods, which determine or identify particulate constituents of a mixture irrespective of the amount present.…
-
30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…
-
Nonsterile PTFE Syringe Filters
Thomas®Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they…
-
Membrane filters for quantitative determination of microorganisms in QC analysis. Cellulose Nitrate (Cellulose Ester) and Cellulose Acetate filters are offered with or without a hydrophobic edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in…
-
-
30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…
-
3mm, 13mm, 17mm, 25mm, 30mm, 50mm 0.10µm to 5.0µm Minimal sample hold-up High purity, non-pigmented housing and no adhesives used Advantec MFS offers a broad selection of filter media in convenient disposable syringe filters and 50mm in-line filter units. The…
-
Magna™ Nylon Membrane Filters
GVS Filter TechnologyWide chemical compatibility Naturally hydrophilic Wide range of pore sizes Recommended for: aqueous, solvent and mobile phase filtration; HPLC sample penetration and solvent filtration; clarification and sterilization Autoclavable pH range: 3-12 Manufactured using a…
-
Filter, Disk, PETE, 3.0µm, 90mm, 30/Pk
GVS Filter TechnologyThe beamed film is then exposed to a chemical solution which etches out the tracks creating precise, cylindrical pores. Pore density is controlled by the number of tracks per unit area, and pore size is controlled by varying the temperature, strength and time of exposure to the etching solution. …
-
Syringe Filter, CA, 0.22um
Bellco GlassFilters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives. Female luer-lock inlet and male luer slip outlet. Color coded by membrane type for easy identification. Specifications: CA (Cellulose Acetate) Low protein binding, reduced…
-
Cell Strainers
BiologixMade of sturdy polypropylene and strong nylon mesh Three different pore sizes available: 40μm, 70μm, or 100μm, strainers are color-coded according to pore size for convenience Fits perfectly into Biologix 50mL Centrifuge Tubes Gamma radiation sterilized, non-pyrogenic
-
Grade A Glass Microfiber Filters
Thomas®Depth filtration glass micro fiber GRADE A - Fine porosity, fast flow rate, with a 1.6µm size particle retention. Frequently used in the filtration of precipitated proteins and cells. Ideally suited for use as a filter for radioimmuno assay of weak beta emitters by scintillation…
-
Phase Separation Filter Paper
Ahlstrom-MunksjoAhlstrom 480 is a hydrophobic silicone-impregnated paper intended for phase separation.
-
-
Syringe Filter, CA, 0.45um,
Bellco GlassFilters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives. Female luer-lock inlet and male luer slip outlet. Color coded by membrane type for easy identification. Specifications: CA (Cellulose Acetate) Low protein binding, reduced…
-
Depth Filtration Glass Micro Fiber GRADE D - Coarse porosity, fast flow rate, with a 2.7 µm size particle retention. Well suited for higher volume and repetitive laboratory filtering. Also ideally used as a general pre-filter to extend primary filter life. Binderless borosilicate glass…
-
Available pore sizes: 0.45µm and 0.80µm Color: Black or Green Surface: Gridded Packaging: Individually Wrapped and with or without Absorbent Pad. Pleated band for dispensers available. Advantec Mixed Cellulose Esters (MCE) colored membranes…
-
-
Minisart RC
SartoriusMinisart RC: Ready-to-use syringe filter units with hydrophilic, solvent-resistant Regenerated Cellose (RC) membranes. Provide simple, rapid and reliable ultracleaning of small-volume samples for the HPLC or GC analysis.
-
-
Quantitative Filter Papers, Ahlstrom 54 (Ashless)
Ahlstrom-MunksjoAhlstrom manufactures a series of extremely high purity, acid washed filter papers designed for use in analytical and gravimetric analysis. The quantitative grades are manufactured from top quality cotton linters using ultra-pure, reverse-osmosis water and are further treated with dilute acid to…
-
Dual Membrane Self-Locking Filter The Dual Membrane Self-Locking Filter for Pipet-Aids® eliminates the possibility of cross-contamination due to over-pipetting. This unique protective filter which incorporates both 0.8µm hydrophilic and 0.8µm hydrophobic membranes to prevent further use once…
-
Glass Microfiber Filters, Ahlstrom 111
Ahlstrom-MunksjoAhlstrom offers a full range of glass microfiber filters manufactured from 100% pure borosilicate glass. Because of their intrinsic properties, glass microfiber filters have wide applications in many areas of laboratory analysis, especially when fine filtration and high loading capacity is…
-
Hardened Low Ash Paper, Grade 392
Ahlstrom-MunksjoSuitable for routine gravimetric analysis and typical preparation of samples for use in analysis involving instrumental techniques. Low ash grades have intermediate ash content between qualitative grades and ashless grades. Grade 392 is medium to slowly filtering and used for fast filtration…
-
MILLIFLEX OASIS® filtration unit
MilliporeSigmaMILLIFLEX OASIS® 100 mL funnel is a ready-to-use, sterile filter unit that combine a funnel and a gridded membrane filter in a single device offering a complete solution for bioburden testing. The filter unit is made of Styrene butadiene copolymer and the membrane is made of mixed cellulose esters…
-
30/cs Available in a variety of membrane types, porosities and diameters Color-coded for easy recognition Filters include luer-lock connections with polypropylene housings Filters are molded in the housings, providing a reliable seal without the use of adhesives Individual peel-to-open…
-
TITAN2® 30mm Syringe Filters
Thermo Scientific Sun SRiBanded polypropylene housing ensures lab safety preventing the housing from bursting Color-coded housing allows for easy identification of membrane Most 30mm filters have a 1 micron glass pre-filter For sample volumes of 2mL to 100mL Retention volume < 115µL Maximum…
-
SYRINGE FLTR ABLUO SUPREME 25MM FLL/MLS PP GF/F/PES 0.7/0.45UM CLR 50/PK
GVS Filter TechnologyEasily separate sediment and grit from samples Two layers of pre-filter allow for the use of less force, making filtration faster and easier for lab technicians Ensuring high-quality filtration by supporting viscous and heaviest sediment filtration, resulting in a pure sample every time A full…
-
500mL Filter System, PES
Bellco GlassFilter Systems include bottle top filter and solution bottle with cap ( Bottle Top Filter available separately). Specifications: Easy-to-read molded graduations marks on bottle top filter Bold easy-to-read printed membrane and pore size for easy identification Curved bottle design for…
-
Polycarbonate Filling Bell
Thermo Scientific NalgeneTransfer sterile media aseptically from large containers to small media bottles or culture vessels using the Thermo Scientific™ Nalgene™ Polycarbonate Filling Bell. Transparent and autoclavable Fits most common media bottles Nontoxic polycarbonate will not shatter Bell…
-
Kit Of 8 Vacuum Caps And (1) Tubing Adapter For Reusable Filter Holders
Thermo Scientific NalgeneAdapter kit for Reusable Filter Holders Consists of 8 vacuum caps and a tubing adapter