Use these economical sterile disposable filter funnels to perform microbiological QC testing and analysis of water, food/beverage, raw material and finished product. The squeeze and twist funnel is easy to remove for retrieval of the CN membrane. Economical, disposable and sterile …

Borosilicate glass, liquid addition funnel with offset bottom joint Bottom standard taper joint with PTFE stopcock is offset to one side to accomodate space on crowded reactor heads, also allows for a larger funnel to be used. Top and bottom standard t

Polysulfone Durable and non-toxic Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber…

Ready-to-use 100 mL filtration units with removable cellulose nitrate membrane and culturing devices. Saves up to 50% in time with no flaming and sterilization required Minimizes the risk of cross contamination Easy release of membrane

Buchner funnel includes fixed perforated plate. Funnels are glazed on inner and outer surfaces except for the rim. Thermal Shock Resistance - average coefficient of expansion from 20° C to 200° C is 3.56 x 10-5, gradually increasing to 4.69 x 10-5 at 1050°C. Every batch of…

Buchner funnels having a perforated plate rather than a fritted disc. Funnels accept filter paper size as listed.

Glass Long Stem Funnels, 60 degree angle, Stem length is 150mm.

Ring for hanging; stem has groove for air passage Internal and external ribbing for air release

Eichrom’s disposable funnel units come preloaded with our Resolve® filters for alpha spectrometry source preparation. Like the Resolve filters, the funnel units are designed to maximize analyte recovery and the resolution of the filter. These units are disposable, therefore eliminating the…

Inside flutings for rapid filtration 60° angle permits accurate fitting of filter paper. Long 150 mm stem. Strong beaded edge. Depressed inside flutings further decrease filtering time.

Filter support collars are ideal for supporting glass funnels, crucibles, Büchner funnels, and other filtration devices. The rubber collar forms a gas-tight seal during vacuum filtration. Rubber Tapered Filter Adapter Complete Set of 8 different sizes. Size 1-8 as listed as height, top inner…

Short stem, addition funnel with ptfe stopcock plug included. 24/40 top and bottom joints. Stopper (8250-12) is not included.

Cylindrical with joint at top and bottom and drip stem. Stopcock on equalizing arm permits filling funnel without having to open the system to atmosphere. For replacement stopcock plugs, see 8224. For stoppers, order 8250-12 or 8255-10.

Useful for direct filtration applications of small volumes under vacuum. Complete apparatus consists of a Buchner funnel with 14/20 top outer and lower inner joints, and a 50mL Erlenmeyer flask having a 14/20 outer joint.

These autoclavable, table-top Buchner funnels are ideal for vacuum filtration. Includes a tubulated side outlet and accepts standard filters. The 750ml size is 60mm tall, 147mm in diameter, requires 125mm filter paper and the side outlet is 5/8" (16mm).

For standard filter papers Body is at 60° angle with internal ribs at 58° for rapid filtration Outside ribbing eliminates air lock Autoclavable

Manufactured from thick walled borosilicate glass, funnels include a beaded rim and a fritted disc with coarse, medium or fine porosity.

Funnels. High-density polyethylene. These funnels are ideal for many applications in the laboratory and industry. Upper portion of funnel is straight sided, helps prevent spill-over. Maximum temperature for high-density polyethylene is 110°C.

Ready-to-use, sterile system combining gridded membrane filter and funnel with a click-fit closure all in one unit. Specifically developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. Microsart @filter units are…

For positive pressure filtration of materials up to 15 psi. Connection between the funnel and adapter is made by an o-ring joint which permits a larger, grease free opening for sample retrieval. The 24/40 lower inner standard taper joint has an outlet for connection to a vacuum source. Complete…

Cylindrical with 24/40 standard taper joints top and bottom and drip stem. Stopcock has 1:5 PTFE plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with glass plug, see 7291.

Filter large volumes quickly Filter large volumes quickly with a polyethylene plastic Table-Top Buchner Funnel using your choice of Fritware® or Perforated filter plate. Removable hose barbed connector accepts 12.7mm (1/2") I.D. tube and threads into 3/4" NPT bung on the…

Sartolab® Vacuum filtration units are designed for the convenient clarification & sterile filtration of tissue culture media and components, biological fluids, and other aqueous solutions. Sartolab® RF BT vacuum filtration units are available as ready-to-use disposable 50 mL, 150 mL,…

Cylindrical with standard taper joint top and bottom and drip stem. Stopcock has 1:5 PTFE plug. Drip stem does not extend beyond joint, thereby eliminating possible source of breakage. For same funnel with glass plug, see 9490.

This unique disposable filter funnel system for solid-liquid separation can be used in chemistry and biological laboratories. The system consists of a polypropylene filter funnel with diatomaceous earth/polyethylene fritted disc, a CG-1049-J style glass vacuum adapter, and a flask or vial. The…

Graduated Instatherm® addition funnel provides precise heating for reactor systems demanding heated or constant temperature for the added reactants. Funnels feature standard taper outer top joints and bottom PTFE stopcock inner joints. All funnels include a 9698-20 connecting controller cord.

Unique gravity-sealing design Two-piece construction One-handed operation Large membrane access points for forceps Available in polysulfone or polypropylene No clamps or locking devices to manipulate. Less expensive than stainless steel, glass or magnetic funnels, yet compare favorably with…

Cylindrical with joint at top and bottom, drip stem, and double scale graduations, calibrated from stopcock. Drip stem does not extend beyond the joint, thereby eliminating a possible source of breakage. PTFE or metering valve stopcock plug.

Analytical Filter Funnel, Polystyrene; Cellulose Nitrate (C.N.) Membrane CONTAINS FILTERS ONLY Nalge 140 47 mm diameter filter with grid Ideal for use with filtering flasks or manifolds Convenient snap-away design with removable membrane; funnel marked at 100 mL …

Similar to AF-0542 but with the top having a standard taper inner joint instead of the outer joint. Available with a choice of a 2mm high vacuum glass stopcock having a S.S. constant pressure retaining device or a 0-4mm Chem-Cap® Airfree® inlet valve.