Bags

Page 1 of 6
  • Image of Thomas Tight-Ties Assortment Kit

    Thomas Tight-Ties Assortment Kit

    Item #: 1235C46
    Works with all types of plastic and rubber tubing Ties can be gas sterilized Tapered tip for fast insertion and tightening Tensile strength is 12 to 50 lbs Temperature range is -40 to 185°F/-40 to 85°C Diameters from 1/16 to 4” Kit includes 100 each of 4”, 5-3/4” and 8” ties and 50 each of 11” and...
  • Image of Whirl-Pak® Water Sample Bags

    Whirl-Pak® Water Sample Bags

    Sterile polyethylene bags with sodium thiosulfate Disposable, transparent bags for water sampling With white marking strip and 4 oz. fill line Similar to 1303R20 bags except contain a nontoxic, non-nutritive tablet impregnated with 10 mg of sodium thiosulfate. For dechlorinating water samples in...
  • Image of Heat-Sealable Bags

    Heat-Sealable Bags

    Leakproof Transparent polyester with polyethylene lining, 2 mils thick For use with Scotchpak Bag Sealers Usable with vacuum sealers and a variety of commercial grade sealing equipment such as impulse bar and band types Effective heat seal at 300° to 400°F (149° to 204°C), 20 to 60...
  • Image of Scienceware® Autoclavable Biohazard Bag and Holder

    Scienceware® Autoclavable Biohazard Bag and Holder

    For autoclaving and storing small, contaminated items such as petri dishes, pipet tips, wastes, etc., prior to disposal Constructed of high molecular weight, high density polyethylene, steam autoclavable at 250°F (121°C). Thickness 7 mils; nominal size 8 1/2” x 11”. Bag Holder (1304Q27)...
  • Image of Autoclavable Specimen Bags

    Autoclavable Specimen Bags

    Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.
  • Image of Scienceware® Autoclave Bags

    Scienceware® Autoclave Bags

    Of high molecular weight, high density polyethylene, steam autoclavable to 121°C (250°F) Thickness 1 1/4 mil for size 12” x 24”; 1 1/2 mil for sizes 24” x 30” and 24” x 36” Disposable polyethylene bags hold specimens during autoclaving or sterilization of...
  • Image of Scienceware® Bag, HDPE, Wr, Bench-Top, Biohazard, 8-1/2 X 11

    Scienceware® Bag, HDPE, Wr, Bench-Top, Biohazard, 8-1/2 X 11

    Item #: 1304Q21
    Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack....
  • Image of Bag Sealer

    Bag Sealer

    Item #: 1303R98
    Tabletop thermal sealer provides a quick, efficient means for sealing any type of thermo-plastic film. Provides air- and water-tight seals and an additional seal to the Whirl-Pak® closing tab. Maximum seal size is 8” on 4 mil material.
  • Image of Bag Whirlpak Clear 7oz

    Bag Whirlpak Clear 7oz

    Item #: 1230Z20
    7 oz./207 ml capacity 3-3/4” W x 7” L (9.5 cm x 18 cm) 3.0 mil, .076mm thick Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F, 82° C. Bags...
  • Image of Scienceware® Biohazard Disposal Bags with Indicator

    Scienceware® Biohazard Disposal Bags with Indicator

    With printed sterilization indicator patch Highly-visible color and precautionary markings Polypropylene Available in standard 1.5mil or SuperStrength 2.0mil thicknesses Bright red biohazard bags have indicator patch that darkens during steam autoclave sterilization. Large, black biohazard symbol...
  • Image of Chemitest Autoclave Indicator Bags

    Chemitest Autoclave Indicator Bags

    Self-sealing edges, need no additional closing devices Bags are constructed of paper Have a useable size of 10" x 2.5" x 1.5" for instruments.
  • Image of Clavies® Autoclavable Bags

    Clavies® Autoclavable Bags

    Safe and convenient biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture plates...
  • Image of Clavies® Biohazard Bag Holders

    Clavies® Biohazard Bag Holders

    The stainless steel wire frame and bottom is designed to securely support the bag and its contents. In addition, the polypropylene bottom also serves as a containment tray in the event of inadvertent bag leakage. Tray is safety orange in color for easy identification as a biohazard containment...
  • Image of Clavies® Clips

    Clavies® Clips

    Item #: 1226C02
    Open and close the clip with one hand to easily and securely close the gathered top of an autoclave bag. Clip permits bag to safely vent internal pressure during autoclaving. After autoclaving, clip holds the processed bag closed for final disposal. The closed internal dimension of the clip is...
  • Image of Hazardous Material Disposal Bags

    Hazardous Material Disposal Bags

    Item #: 1233J32
    Hazardous Material Disposal Bags hold saturated cleanup materials for safe, proper disposal Each opaque, bright yellow bag is identified with a large, bold, continuous message, “HAZARDOUS MATERIAL, HANDLE WITH CARE.” Super-strong construction. Carton of 24 bags includes tags and ties.
  • Image of Lab Waste Bag 12X16"

    Lab Waste Bag 12X16"

    Item #: 1233R74
    These disposable waste bags feature an adhesive strip across the top so they can be hung from walls, cabinets, or virtually anywhere freeing bench or hood space. The adhesive backing strip is easily peeled off, and the bag can then be hung where needed. The back panel is longer than the front for...
Page 1 of 6