The Agilent Technologies discrete sampling valve nut is used for integrated sample introduction system (ISIS) with Agilent 7700 and 8800 ICP-MS. Application: For ISIS used with Agilent 7700 & 8800 ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The ISIS 3 increases productivity when used with the Agilent 7800, 7850, 7900 and 8900 ICP-MS. ISIS 3 also allows high matrix samples to be run for extended periods of time. The ISIS 3 enables reduced sample uptake and rinse times with discrete sampling (DS), and delivers unmatched productivity for…

The Agilent Technologies drain tank with a capacity of 2 Liter is suitable for use with organic solvents. It has a polypropylene connector which helps to drain organic waste from spray chamber or to supply organic solvent rinse to auto sampler rinse station. Application: For Organic Solvent,…

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For C-Lens of 8900 Semiconductor ICP-MS This product is only available to U.S. Domestic Customers. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

The Agilent Technologies RF load coil assembly is self-aligning in nature and helps in the installation of various capillary instrument. Application: For NexION/ELAN 9000/6x00/DRCs, PerkinElmer ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent sampler, skimmer, hyper skimmer cones and supplies are equivalent to the PerkinElmer ICP-MS versions. You can have complete confidence in the compatibility of these parts with your PerkinElmer ICP-MS. Large-orifice sampler and skimmer cones provide superior long-term stability and resist…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

10X magnification with LED illumination and measuring scale. Ideal for inspection and measurement of the ICP-MS sampler and skimmer cone orifice. Ten times magnification with LED illumination, manual focus and +/- 15 mm scaled reticle with 0.1 mm divisions. Includes protective case. Requires four…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Replacement Omega ion extraction lens assemblies and individual lens components for replacement and maintenance routine, x-lens, or semiconductor, s-lens, configuration. Application: For M-Lens of Agilent 7900 ICP-MS This product is only available to U.S. Domestic Customers. For research…

The Agilent Technologies front and back ferrule is suitable for use with 3.0 mm O.D tubing. It is compatible with ISIS-DS used with Agilent 7500 ICP-MS. Application: For ISIS-DS used with Agilent 7500 ICP-MS This product is only available to U.S. Domestic Customers. For research use only,…

HPLC separation, followed by ICP-MS detection is well established as the analytical method of choice for speciation analysis of many sample types. As a leader in GC and HPLC systems, columns, and ICP-MS instrumentation, Agilent is at the forefront of hyphenated ICP-MS research and development. For…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

The Agilent Technologies MassHunter user guide in Japanese language is suitable for use with Agilent ICP-MS. Application: For Agilent ICP-MS This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent integrated autosampler (I-AS) supplies for ICP-MS including replacement tubing kits for in-built peristaltic pump and sample probes, which may be integrated with PFA concentric nebulizers including MicroFlow and C-Flow. Agilent offers the fast, flexible, and high-precision integrated…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Ion extraction lenses 7700, 7800, 7900, 8800, 8900 ICP-MS perform an essential function of separating the ions from the photons and residual neutral material for the lowest background signal and highest sensitivity with efficient interference removal. Agilent uses a high transmission off-axis,…

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Agilent GC tubing includes high-quality copper, stainless steel, and UltiMetal Plus tubing, which are manufactured and cleaned for chromatographic use. Agilent tubing comes in different lengths and depending on your flow requirements, is available in 1/16, 1/8, or 1/4 inch. UltiMetal Plus tubing is…

Periodic table sheet with relative isotopic abundance table for Agilent ICP MS, 100/pk. This product is only available to U.S. Domestic Customers. For research use only, not to be used in diagnostic procedures.

The Agilent Technologies gas tubing kit contains a PFA tube measuring 3.17 mm x 1.59 mm x 570 mm (5043-0020) and a PFA tube measuring 4 mm x 2 mm x 500 mm (5043-0019). It is suitable for valve used on Agilent 7900, 8900 with ISIS 3 switching valve. Application: For Valve used with Agilent 7900 &…