Physical Paint Testing

Page 1 of 2
  • Image of Abrasion Tester

    Abrasion Tester

    Helps evaluate washability and abrasion resistance Conforms to ASTM D 2486 The tester reciprocates an abrasive force linearly over the sample. Reciprocating linear motion at 37.0 ±1 cycles per minute with a constant speed over a 10-inch travel. Utilizes a brush, sponge or abrasive paper to...
  • Image of ASTM Scrub Media

    ASTM Scrub Media

    Aqueous dispersions of detergents, cellulosic thickener and preservative Media is adjusted and tested to assure batch-to- batch uniformity. Each container is fully identified by batch number and shipping date. Contents of unopened containers are guaranteed standard in performance for one year....
  • Image of Bird Applicators

    Bird Applicators

    For drawing down wet films of materials in pre-determined thicknesses High grade, bar steel with corrosion-resistant, nickel chrome finish Precision ground to extremely fine tolerances for exact color, gloss and performance evaluations Conforms to ASTM D 2486 (special order), D 3258, D 3265, D 333...
  • Image of Cross-Cut Tool Kits

    Cross-Cut Tool Kits

    Designed for adhesion and flexibility of paints and coatings on a variety of substrates Conforms to ASTM Method D 3359 Hardened tool steel precision blade Kit includes a blade, a blade holder/handle, a hex wrench for changing blades, an extra clamp screw, a small flaking and cleaning brush, a light...
  • Image of Dow Latex Applicator

    Dow Latex Applicator

    Item #: 7295A80
    U-shaped applicator Smooth, uniform width 2 different sized gap clearances The Dow Latex Film Applicator is specifically designed to apply a second coat of paint on dried layer. The applicator applies paint, within its channel, ensuring uniform results with every use. Clearance is 7 and 10 mils and...
  • Image of Drawdown System

    Drawdown System

    Make drawdowns in seconds without the mess Accurate Inexpensive Drawdown system includes a plexiglas drawdown surface, 5 plastic drawdown bars, 250 drawdown cards, a mis-tint ring, a wash up bin and organizer box. The dual-sided, u-shaped drawdown bars draw down a wet film thickness of 3 or 4 mil...
  • Image of Dry Film Coating Thickness Gages

    Dry Film Coating Thickness Gages

    Positest® for the nondestructive measurement of non-magnetic coatings on steel Permanently calibrated Highly wear-resistant carbide probe for longest life and continuous accuracy Refined magnet and balance arm assemblies provide improved resolution and accuracy; four scale ranges available to...
  • Image of Eight-Sided Wet Film Applicator

    Eight-Sided Wet Film Applicator

    Ideal for applying a range of predetermined wet film thicknesses Precision-ground, hardened 440-C stainless steel Accurate Durable Apply up to eight film thicknesses with one device. Applicators with gap sizes up to 50 mils are available on special order.
  • Image of IR Printer For Positector Thickeness Gages

    IR Printer For Positector Thickeness Gages

    Wireless Infrared Printer for use with 6410W60 series thickness gauges Compact and affordable Uses standard 2 1/4” thermal paper Place gauge and printer within 18” of each other and select PRINT on the gauge menu to instantly beam invisible infrared light to the printer. Dimensions:...
  • Placeholder Image for Scienceware® Metric Gauge Diameter Tubing Sizer

    Scienceware® Metric Gauge Diameter Tubing Sizer

    Item #: 1226C15
    Stop guessing! This handy tool allows you to measure the exact size of the metric tubing you need. Simply insert the tubing or test tube over the post for i.d. measurement, or into the well on the reverse side for o.d. measurement. Polypropylene and autoclavable. Fits a range of sizes from 1.5mm to...
  • Image of Paint Test Charts

    Paint Test Charts

    Opacity Charts Test pattern is a simple combination of black and white areas large enough for wide aperture reflectance measurements. Charts comply with all test methods specifying charts of such design. Dimensions: Form 2A - 5 1/2" x 10"; Form 5C, 3B - 7 5/8" x 11 3/8"; Form 14H - 11 1/4" x 17...
  • Image of Paint Test Charts

    Paint Test Charts

    Economical and environmentally friendly charts Proprietary sealer contains no VOC’s Charts are sealed unless otherwise noted Plain White Charts 12 mils thick Dimensions: 5 1/2 " x 10" Used in applications requiring a white, sealed chart. A 1/4" hole is centered 3/16” the top of the...
  • Image of Permacell 99 Cross Hatch ASTM Tape

    Permacell 99 Cross Hatch ASTM Tape

    Semi-translucent, colorless Thickness: 5.5 mils as per ASTM D 3559 Tensile strength: 40 lbs./in. Adhesion to steel: 50 oz./in. For packaging where government specifications are involved or for splicing polyurethane coated fabrics. Tape features a synthetic rubber/resin adhesive and a polyester...
  • Image of Positector 6000 Electronic Thickness Gage

    Positector 6000 Electronic Thickness Gage

    Adjustable to any known thickness Low range accuracy and resolution (hundredths) Instant auto-calibration Simple one-handed operation Unique integral probe design RESET feature instantly restores factory settings. Converts instantly between Mils/microns. Last reading is displayed upon power-up....
  • Image of Positest Pull-Off Adhesion Tester

    Positest Pull-Off Adhesion Tester

    Precisely measures adhesion of coatings to metal, masonry and other substrates Self-alignment feature NIST Calibrated and certified to ±1% accuracy (full scale) Conforms with ASTM D4541, ISO 4624 Inexpensive single-use dollies eliminate the need for heating, cleaning or brushing for re-use...
  • Image of Powder Checker Thickness Gages

    Powder Checker Thickness Gages

    Measure the thickness of applied dry coating powder before curing Manufactured to a tolerance of ±0.0002 Convenient shirt pocket size Available in mils or microns Gages are ideal for set-up and quality control. Gages work on a variety of part sizes, shapes and substrates such as metal,...
Page 1 of 2