- Temperature range is –76 to 1022°F and –60 to 550°C
- Resolution is 0.1°
- Accuracy is ±2% or 2°C + 2%
- Size is 7 x 3-3/4 x 2 inches
- Weight is 9 ounces
Traceable® Infrared Dual Laser Thermometer, operation is simple—turn on, point at sample, and take a reading in less than a second. Dual lasers indicate the outer diameter of the surface area being measured and the white LED light illuminates the surface. Field of view is 12:1 (for example, at a distance of 24 inches the reading spot size is 2 inches). Unit reads both Fahrenheit and Celsius of any surface—solids, semi-solids, and liquids. Non-invasive, no-touch, measurements are ideal for food, life sciences, pharmaceuticals, petroleum products, clean rooms, electronics, and field use. Temperature range is –76 to 1022°F and –60 to 550°C. Resolution is 0.1°. Accuracy is ±2% or 2°C + 2%.
The dual display shows current temperature plus one of the following eight modes: emissivity value, maximum memory, minimum memory, differential, average (time weighted), high temperature alarm, low temperature alarm, and probe temperature. Minimum and maximum feature permits viewing highest and lowest readings at any time. Thermometer displays the average of all readings made while taking measurements and the difference between two readings. Audible, user settable, high and low alarms signal out of range conditions. Display backlight permits viewing in low light conditions. For measurement of different types of material, adjustable emissivity may be set from 0.1 to 1.00 in increments of 0.01. Range using Type-K thermocouple jack is –83 to 2552°F and –64 to 1400°C.
Traceable® to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Type-K beaded sensor and two AAA Alkaline batteries are supplied with unit. Size is 7 x 3-3/4 x 2 inches. Weight is 9 ounces.
Please note: The aforementioned A2LA accreditation belongs to the manufacturer, not Thomas Scientific.