Isolate instruments from disturbing vibrations Two convenient sizes Absorb vibration down to 9 Hz Molded of dense black and white terrazzo, with four Vibro-Absorber™ cushions and neoprene feet, damping mount absorbs even the slightest vibrations. Supports up to 35 lbs.…

OHAUS Value in a Full-Featured, Portable Printer The all-new SF40A combines high performance and multiple functions to offer OHAUS quality and durability in a portable printer. The SF40A offers advanced functionality in an easy-to-use and set up printer at an exceptional value. This versatile…

The Mettler Toledo P-52RUE printer finds its usage in chemical laboratories and healthcare facilities to ensure the safety of the user. User-friendly design and the strong and efficient construction makes it a must to have at your disposal. Mettler products are intended for sale/shipment within…

Consists of three massive rectangular slabs of marble, 3 inches thick, braced by a powder-coated steel pipe Overall dimensions 35 x 24 x 31 inches high Because of weight, table will be shipped directly from quarry, F.O.B. Center, Rutland, VT. CAUTION: Intended location must…

This battery pack is designed for use with Sartorius AC adapter GPP8 and for connection to devices that use this AC adapter. Use the AC adapter GPP8 that was supplied with your device to charge the battery pack.

Replacement paper for PRNT-01 Dot Matrix Printer. Package of 3 replacement rolls.

Foxx Life Sciences Stainless Steel Pharma Scoops fulfill or exceed the high safety and regulatory compliance requirements in production and sampling for the pharmaceutical industry. These exceptional products are made of high-quality, corrosion and chemical resistant, 316L Stainless Steel. The…

Stainless steel work surface with spill trough

The Mettler Toledo connection cable is an ideal thing to have in any chemical laboratories, medicinal facilities or healthcare units for a wide range of purposes such as scientific research and development. Mettler products are intended for sale/shipment within the US only. International…

The interface cable allows for easy connection to a computer to stream data from Thomas Scientific Balances into data colleciton software. This cable is compatible with the following balance series: TS-T Series TS-L Series TS-P Series TS-PH Series TS-M Series

Foxx Life Sciences Stainless Steel Funnels are made of high-quality, corrosion and chemical resistant,316L Stainless Steel. These superior products fulfill or exceed the high safety and regulatory compliance requirements in production and sampling for the pharmaceutical industry. The hygienic…

The AIP is a compact, high-speed dot matrix printer that is both versatile and sturdy. Simple to use, AIP operates with only an on/off switch and a paper feed button. For efficient communication, the printer connects with any scale or balance having RS-232 or USB interface, and automatically…

A general purpose thermal roll printer, the ATP is ideal for use with most balances and scales. Designed to be efficient and compact, the printer occupies minimal space on a bench or tabletop. Operation is simple, with an on/off switch, paper feed button and three LED indicators. Ideal for printing…

The RS-P26 Compact Printer generates GxP-compliant printouts on regular or adhesive paper. The ergonomic design makes operation easy and allows tarring and printing of the balance directly from the printer. Thanks to the compact footprint, the RS-P26 printer finds place even on smallest work…

1228Z88 ErgoClip helps to perfectly position volumetric flasks of 1-10 mL. It allows directly dosing into the desired tare container. Dosing in directly means avoiding transfer errors, thus precious substances can be saved. 1228Z89 ErgoClip helps to perfectly position several tubes (test…

Stabilizes weighing results against environmental vibrations.

The OHAUS density determination kit is mainly used for density determination of solids and liquids. The accessories such as interface cables, extension cables, Ethernet kit, column kit, USB kit and draft shield kit are compatible for use with electronic balances and thermal printers.

Laser Etching Serialization provides traceability of your weights as they move throughout your facility. Weights can be etched with a serial number or ID number that matches those on your Weight Calibration Certificate.

Heavy-Duty Cases for OIML Precision Weights are tough, lightweight, rugged, and are designed to protect weights under any shipping circumstance. The dent and shatter resin is sure to keep weights safe and secure. Each case is lined in high quality ethafoam with a custom cutout for your weight. The…

Anti-static ionizer used to remove overflow of plus/minus ions from the balance environment. The ionizer neutralizes the electrical charges in the air to aid in the balances performance of measurements when unwanted electral influences are present. Frame dimensions of 175 x 70 x 172mm.

For safe transport of balances All cases are made of impact-resistant plastic and accommodate the balance, accessories and documentation. Transport case for AB-S balance has additional space for LC-P43 printer. Mettler products are intended for sale/shipment within the US only.…

Antistatic kit including one stand and one compact electrode for XPR micro balance Reliable Weighing Results The AntiStatic Kit completely removes electrostatic charge from your samples. Scattering of powdery weighing substances is eliminated. Fast and Safe Sample Handling The…

Polycarbonate Cases for Analytical/OIML Precision and Stainless Steel Test Weights are supplied in an attractive, durable, high quality patent pending polycarbonate weight cases with a compartment for each weight within the case. There are also compartments for the forceps and brush (not included).

The YDK03 density determination kit can be used with the following balances: Secura® , Quintix® , Practum® with readability of 1 mg or 0.1 mg BSA balances with readability of 0.1 mg CPA balances with readability of 0.1 mg Entris balances with readability of 0.1 mg

Density Determination Kit for use in determinig density of solids and liquds. This kit is compatible with the following Thomas Scientific balances: TS-T Series (1mg readability) TS-L Series (1mg readability)

Protective plastic cover to protect the TS-L Series (1200g and 2100g capacity) and TS-PH Series balance housing from scratches, dust or spills. Comes in pack of 3.

QP1 The Pharma software application package contains applications concerning the topic compliance with pharmaceutical-relevant guidelines as 21 CFR Part 11 and USP 39, Chapter 41. The Pharma package includes applications such as user management, digital signatures, audit trail, USP minimum…

The RS-P28 Compact Printer delivers GxP-compliant printouts on regular, adhesive or lightfast paper. The ergonomic design makes operation easy and allows tarring and printing of the balance directly from the printer. The RS-P28 is extended with the Statistics and the Totaling application. …

Accessory for the Mettler Toledo™ Balance LC-P45 printer (1320R10). Black ink ribbon Mettler products are intended for sale/shipment within the US only. International customers should contact their local Mettler distributor to place orders for Mettler products.