Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

The FLIR VS80 is a versatile, professional videoscope that you can  rely on when inspecting locations that are difficult or unsafe to access. Seven unique compatible probes* with waterproof (IP67) camera tips are available to give you flexibility for virtually any type of inspection. Options…

Dual-channel Oscilloscope with 3.8" (97mm) color LCD display Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms Peak Detect function for 50ns glitch capture XY Mode and FFT function to view component frequencies …

Quickly Identifies and Pinpoints Gas Leaks 16" (406mm) gooseneck for easy access into hard to reach locations High Sensitivity One hand operation with thumb controlled sensitivity adjustments to eliminate background gas levels Visible and audible alarm at 10% (LEL) Lower…

Superior Electric Powerstat & reg; with Ace Warning Glow variable output transformer. Autotransformers have one wire continuous from input to load. If this wire is incorrectly connected to the "hot" side of the service, a 110-120v potential exists between it and the ground. Reversing…

The EFM51 is a full-featured hand-held field meter used to perform static surveys and evaluate charge accumulation in electronic manufacturing and in industrial operations. The EFM51 measures static voltages within ±20kV (20,000V) with a microcontroller that calculates the field strength (V/m) with…

Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The EC210 is a Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/ cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature…

The Extech EX470A True RMS Multimeter and Infrared Thermometer with Capacitance, Frequency, and Duty Cycle Measurements and 2 K-Type Remote Probes is the perfect meter for HVAC or plant maintenance. The IR thermometer measures the surface temperature from -4 to 518 °F (-20 to 270 °C)…

Measures surface and volume resistance.

Omni G-Style 10mm x 115mm Stainless Steel generator probe with saw tooth bottom and fine windows. This probe has Omni's EZ-style drive connect that is compatible with the TH handheld homogenizer, as well as the stand-mounted GLH and digital programmable PDH. This probe can operate in volumes…

The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and for qualification / verification of ESD control elements

Our compact, pocket-sized moisture meter measures moisture content in wood and other building materials such as: sheetrock, drywall, wallboard, concrete, mortar, plaster, etc. This handy, compact moisture meter has a dual backlit LCD digital display for moisture & temperature. Displays temperature…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

High qualitlity alligator clip for grounding items such as ESD wrist straps. Connect to a standard banana plug

The 7220.45 hand probes are designed to be used with resistance meters to evaluate ESD flooring according to ANSI ESD20.20. The probe is held in the hand and ensures excellent contact with skin while performing Walking Tests and other resistance measurements. The contact surface is made from rugged…

Precision meter provides resolution down to 1µOhm 6 ranges with 3 sub-ranges in each current range Measurement of resistive and inductive materials 5-Digit backlit LCD, PC interface Auto or Manual ranging, 10A maximum test current Store/Recall up to 3000 measurements …

Fast response with high accuracy, the Extech IR270 is ideal for quick checks of multiple spots in a process or for catching spikes in temperature. Easy programmable High/Low Alarm with tri-color display and audible alarm measures non-contact temperature up to 1202°F (650°C).

The HDV540 is a light weight Videoscope which includes a wired handset and 6mm diameter camera with 240° articulating tip for best viewing angle. Easy one-hand operation of the articulating camera tip facilitates viewing in obstructed areas where standard camera tips cannot access. Images and…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

The METRISO 3000 test kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10 – 500V and also be varied if desired.

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique two sized design combines a concentric ring probe and a cylindrical disk probe into one easy to use…

The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

Measure earth ground in 4 ranges from 2 to 2000 Ohm 4-wire, 3-wire, and 2-wire testing Large dual line LCD Automatic I (current) and P (potential) spike check Test Hold function for easy operation Autoranging, Automatic Zero adjustment, Data Hold and Auto Power off AC Earth…

The TKG-B is a carrying case for Extech's TKG series thickness gauges. The TKG-B is a durable case that will protect your meter. The built in belt clip secures the case to you when meter is not in use. The TKG-C is a bottle of water soluble coolant solution for use with the TKG series of…

The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…

Precision Current & Voltage Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 0 to 20V DC calibration source Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit LCD Standard banana I/O ports Large…

The CM2815 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…

The TP873-5M is an extra-long bead wire type K temperature probe. The TP873-5M is a 5 meter long temperature probe with a mini connector and banana plug adaptor. Comes with a six month warranty.