Precision Current & Voltage Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 0 to 20V DC calibration source Up to five user adjustable calibration presets Palm-sized double molded housing and large dot-matrix digital backlit LCD Standard banana I/O ports Large…

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…

48VFL11 Temperature PID controller offers Fuzzy Logic enhanced PID and a Soft-Start feature that protects heaters from cold-starts. PID plus Fuzzy Logic tackles even the most demanding applications, eliminating over-shoot, unwanted process fluctuations, and drift. The Soft Start feature is ideally…

The DT100M measures distance up to 330ft (100m) and can calculate area and volume and the integrated Pythagoras theorem which allows for the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking that updates every 0.35 seconds, 20 point…

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test circuit which eliminates the need for separate wrist strap and foot grounder testers which saves money and…

Standalone light meter that can also wirelessly display, log and transfer readings to your iOS or Android smartphone. Sper Scientific’s Bluetooth Light Meter is small, light, and simple to use with results displayed on the meter’s large, bright backlit display. Choose readings in lux or…

The EX350 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring…

The MG310 is a Compact Insulation Resistance Tester which allows quick and easy testing/troubleshooting of motors, transducers, and other industrial appliances. Wide range measurement up to 1000V with Insulation Resistance to 5.5GΩ. Includes an easy snap on protective hard cover and soft…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…

The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and for qualification / verification of ESD control elements.

Pair the PGT120.COM tester unit with the 7100.PGT120.COM.TC18 Touch Screen and Data Terminal and you receive real-time ESD testing with personnel identification, access control and central data maintenance. Also connect to a number of accessories such as a label printer, bar code scanner, RFID,…

The IDP-STAT® ESD Badge Holders are an excellent way to shield employee badges, guest passes, or key cards. Made from permanently dissipative IDP-STAT® PVC film, these badge holders will never fail in the field and become a potential ESD threat. The ESD protection makes them safe for use in…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. Quickly and easily test ionizer decay times and offset voltage (balance) according to ANSI ESD2020 and IEC 61340-2-1. The CPM74 is battery powered and due to its compact design, it is very…

The veribox contains resistors for the verification of high resistance tester before use

The METRISO 3000 test kit measures a wide range of values: low resistance from 1KilaOhm to 1.2 TeraOhm. The kit comes with two 5lb disc probes and has an integrated temperature and humidity gauge. Measuring voltage can be set between 10 – 500V and also be varied if desired.

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique two sized design combines a concentric ring probe and a cylindrical disk probe into one easy to use…

This electrode is used to measure the resistance to ground of gloves and finger cots as worn according to ANSI/ESD SP15.1

Key Features Detects between 100 V AC to 69,000 V AC Can be used in 5 ways - around the neck, clipped to front jacket pocket or belt, in the hand, on an arm and on a hot stick Allows hands free operation for work tasks by using a safety break-away neck lanyard or clipped or strapped…

50 m extension cable for floor measurements for the Metrsio 3000

The EMF450 is a convenient 3-in-1 EMF meter which simultaneously measures and displays Magnetic Field, Electric Field and Radio Frequency Strength. Ergonomic pocket-sized design with an easy-to-navigate menu. Large vivid color TFT display shows digital readings, bargraphs, and trending graph.…

Monitor up to 3 environmental parameters with one tiny instrument: Wind Speed, Air Temperature, Relative Humidity (RH). Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field…

The MA445 is an 11 Function, 400A True RMS AC/DC Clamp Meter and NCV. Compact Clamp Meter with Type K temperature measurements. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and ETL certified.…

The EX655 is a 600A True RMS AC/DC Clamp meter. This clamp meter also measures AC/DC voltage, resistance, capacitance, frequency, temperature, continuity/diode test and has an NCV detector. The EX655 has a 1.18" jaw size which accommodates conductors up to 350 MCM. This meter also features a…

Compact and powerful, the Extech EX410A Eight-Function True RMS Professional Multimeter provides the versatility of multiple meters in one convenient device. The EX410A measures AC/DC voltage and current, resistance, diode, and temperance. A large, backlit display and 1-inch high digits allow for…

The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment. With the…

The HDV650W-10G is a Plumbing Video Scope Kit that features a Wireless Handset with Articulating Probe for an up to 10m(33ft) working distance. SD memory card included to store over 15,000 images. 5.7" color LCD TFT with high definition 640 x 480 VGA pixel resolution. Complete with…

Features a large bar graph display, A & C decibel frequency weighting scales, min/max, peak, fast or slow response, AC or DC output, auto-power-off, low battery indicator. Covers 30 to 130 dB in the A & C scales with a resolution of 0.1 dB and an accuracy of ±1.4 dB (ref 94 dB@1KHz). Comes ready to…