Standalone light meter that can also wirelessly display, log and transfer readings to your iOS or Android smartphone. Sper Scientific’s Bluetooth Light Meter is small, light, and simple to use with results displayed on the meter’s large, bright backlit display. Choose readings in lux or…

The MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. Complete with test leads, three AAA…

Precision Current & Voltage & Thermocouple Source/Measure Calibrator 0 to 24mA (-25 to 125%) readout 24V DC power source for 2-wire current loop 0 to 20V DC calibration source Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N) CJC - Cold Junction…

This electrode is used to measure the resistance to ground of gloves and finger cots as worn according to ANSI/ESD SP15.1

The EMF450 is a convenient 3-in-1 EMF meter which simultaneously measures and displays Magnetic Field, Electric Field and Radio Frequency Strength. Ergonomic pocket-sized design with an easy-to-navigate menu. Large vivid color TFT display shows digital readings, bargraphs, and trending graph.…

Tests voltage up to 10kV and measures Insulation Resistance to 500GOhm High test voltages up to 10kV with Insulation Resistance to 500GOhm Polarization Index (PI) measurement Dielectric Absorption Ratio (DAR) measurement EnerSave™ limits test duration to 10 seconds to save…

Superior Electric Powerstat & reg; with Ace Warning Glow variable output transformer. Autotransformers have one wire continuous from input to load. If this wire is incorrectly connected to the "hot" side of the service, a 110-120v potential exists between it and the ground. Reversing…

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test circuit which eliminates the need for separate wrist strap and foot grounder testers which saves money and…

Extension set with T-handle Note: Can be used only with Model 870 probe

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The EC210 is a Compact handheld Conductivity Meter with long life carbon rod combination electrode measures Conductivity, TDS and Temperature. Units of measure include μS/cm, mS/ cm, ppm, °F, and °C. The meter features three ranges for Conductivity and TDS plus adjustable Temperature…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

The CAL1000 device is used to facilitate easy, in-house, calibration verification of most ESD testers and surface resistance meters. The CAL1000 is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment. With the…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

The 890 two-sided probe is used with a surface resistance meter to take volume resistance, point-to-point resistance, surface resistance and resistance-to-ground measurements. The 890 probes unique two sized design combines a concentric ring probe and a cylindrical disk probe into one easy to use…

Measure the Light Intensity for White LED Lights Measure white LED and Standard Lighting in Lux or Foot-Candle (Fc) units Built-in sensor with protective cover 4000 count LCD display Cosine and color corrected measurements Min/Max Average and Auto Power Off Complete with 2…

High speed, consistent static elimination for an extended 3’x6′ coverage area – Includes a heater! The BFN 8412 extended range ionizing blower, with AC technology, provides excellent balance and stability for secure workstation protection. Designed to cover a broad 3? x 6?…

Our compact, pocket-sized moisture meter measures moisture content in wood and other building materials such as: sheetrock, drywall, wallboard, concrete, mortar, plaster, etc. This handy, compact moisture meter has a dual backlit LCD digital display for moisture & temperature. Displays temperature…

The BFN®G10 ionizing gun combines portability, fast static decay rates, excellent balance and low compressed air consumption to efficiently remove static and contaminates in the Semi-conductor, Electronic Assembly, Medical Device, Optics, Automotive and Pharmaceutical markets. The BFN®G10…

Measure the Light Intensity for Color LED Lights Measure White, Red, Yellow, Green, Blue, and Purple LED and Standard Lighting in Lux or Foot-Candle (Fc) units Manually store/recall up to 99 readings 4000 count LCD display Cosine and color corrected measurements Min/Max Average…

The VB450 is a convenient compact sized Vibration Meter which measures vibration levels in industrial machinery. Misalignment, poor balancing, structural compromises, and other factors can cause unwanted vibration increases.  VB450 features a wide 10Hz to 1500Hz frequency range and provides…

The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. Quickly and easily test ionizer decay times and offset voltage (balance) according to ANSI ESD2020 and IEC 61340-2-1. The CPM74 is battery powered and due to its compact design, it is very…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

This SRM 110 from Wolfgang Warmbier uses parallel electrodes and concentric rings to accurately measure RTT, RTG, or resistivity for periodic verification, factory audits or test lab evaluation of product. This meter is designed to verify incoming materials such as floor mats, table mats, bins and…

High qualitlity alligator clip for grounding items such as ESD wrist straps. Connect to a standard banana plug

The CM2815 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…

Monitor up to 3 environmental parameters with one tiny instrument: Wind Speed, Air Temperature, Relative Humidity (RH). Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field…

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade boxes can quickly and accurately simulate resistance for testing the accuracy of ESD testers and meters.

The EX350 is a professional DMM loaded with advanced features and functions. Low Impedance (LoZ) mode eliminates false readings caused by ghost voltages. Low Pass Filter (LPF)attenuates high frequencies to reduce noise for accurate readings. True RMS provides accurate readings when measuring…

The MA445 is an 11 Function, 400A True RMS AC/DC Clamp Meter and NCV. Compact Clamp Meter with Type K temperature measurements. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. CAT III 600V safety rating. CE and ETL certified.…

Monitor up to 8 environmental parameters with one tiny instrument. Light weight, tiny size with simple, one-hand, operation. They are perfect for scientists, agricultural specialist, facilities managers, HVAC professionals, home inspectors, field technicians, health and safety personal, hazmat…

The ESD-Audit-Kit includes instruments and equipment needed to perform ESD audits according to IEC 61340-5-1 and for qualification / verification of ESD control elements