Fast response with high accuracy, the Extech IR270 is ideal for quick checks of multiple spots in a process or for catching spikes in temperature. Easy programmable High/Low Alarm with tri-color display and audible alarm measures non-contact temperature up to 1202°F (650°C).

Measures Current, Insulation Resistance, Temperature (Type K) and Power 1.6" (40mm) clamp jaw opening and large dual LCD display (9999 count) Measures 1/3-Phase True Power (kW), Apparent Power (kVA), Reactive Power (kVAR), Horsepower (HP), Power Factor, and Phase Angle with…

The veribox contains resistors for the verification of high resistance tester before use

High qualitlity alligator clip for grounding items such as ESD wrist straps. Connect to a standard banana plug

The MA63 is an AC/DC current clamp with NCV voltage detector and full overload protection. Manual ranging clamp meter with three Current ranges and AC/DC voltage to 600V. The 6000mA range allows for low current measurements that may be used in the automotive industry. Unique VFC (variable frequency…

Quickly and accurately verify the calibration of the Ranger Series dual wire resistance constant monitors. The CM2015PV is a resistance box with fixed 5% precision resistors. Resistance decade boxes can quickly and accurately simulate resistance for testing the accuracy of ESD testers and meters.

This insulation tester is capable of measuring 250V, 500V or 1,000V test voltages and insulation resistance up to 2000M ohms. When undertaking power installations, the 420001-insulation tester can provide special help to test wiring. This unit can provide 125V, 250V, 500V and 1000V source for the…

The MA610 is a fully loaded clamp meter with multimeter functions including AC Current, AC/DC Voltage, Resistance, Frequency, and Capacitance. It also has a built-in non-contact voltage (NCV) detector to quickly check circuits and wires for live voltages. Complete with test leads, three AAA…

The TKG-B is a carrying case for Extech's TKG series thickness gauges. The TKG-B is a durable case that will protect your meter. The built in belt clip secures the case to you when meter is not in use. The TKG-C is a bottle of water soluble coolant solution for use with the TKG series of…

Data Terminal Controller For The 7100.PGT120.COM

The Warmbier CPM74 Charge Plate Monitor is an simple-to-use device to measure air ionizers performance. Quickly and easily test ionizer decay times and offset voltage (balance) according to ANSI ESD2020 and IEC 61340-2-1. The CPM74 is battery powered and due to its compact design, it is very…

Enables precise measurement of solar radiation power for the manufacture and installation of solar panels and environmental applications. Results appear in W/m2 or BTU/ft2 on a triple tier backlit display which shows a continually updated minimum, maximum or average reading. The display also shows…

The DT100M measures distance up to 330ft (100m) and can calculate area and volume and the integrated Pythagoras theorem which allows for the user to take indirect measurements. Other features include continuous measurement with Min/Max distance tracking that updates every 0.35 seconds, 20 point…

The GTS900K Deluxe Dual Combo Tester is a three-state touch tester designed for fast and accurate testing of ESD heel grounders and wrist straps. The GTS900K incorporates a unique dual test circuit which eliminates the need for separate wrist strap and foot grounder testers which saves money and…

The PQ3450-2 is a 200 Amp Data logging Power Analyzer (up to 30,000 sets of measurements). Large dot-matrix, sun-readable, numerical, backlit LCD with easy-to-use onscreen menu. Full system analysis with up to 35 parameters. Includes 200 Amp Current Clamps; Optional 1200 Amp Current Clamps or 3000…

The DT500 is a Laser Distance Meter with Bluetooth. This meter will measure the distance from the meter to a point 229ft (70m) away. The DT500 transmits distance readings to Apple iOS mobile devices and can measure Area and Volume as well as perform sum, difference and Pythagorean theorem…

The EX655 is a 600A True RMS AC/DC Clamp meter. This clamp meter also measures AC/DC voltage, resistance, capacitance, frequency, temperature, continuity/diode test and has an NCV detector. The EX655 has a 1.18" jaw size which accommodates conductors up to 350 MCM. This meter also features a…

Tests up to 1000VAC with visual/audible indication 75 to 1000VAC input voltage with 45 to 65Hz frequency range LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live Beeper sounds intermittently when correct phase is detected and continuously…

Monitor visible light levels anywhere with fast, stable and accurate response. Results are easily read on the extra large LCD (1½" high, 38.1 mm) with bar graph, low battery and over range indications. The color and cosine corrected sensor meets C.I.E. photopic spectrum. Will read LED light. Also…

BR-17CAM-2M 17mm Borescope Camera head with Cable for Extech Borescope Models BR100, BR200 and BR250. 78.7 in. (2m)cable length with 2.36 in. minimum bend radius. 50 Degree viewing angle. 5.9 to 9.8 in. focus distance. Waterproof (IP67) with 2 bright LEDs with dimmer. BR-17CAM-5M 17mm…

The SDL900 is an AC/DC Magnetic Meter and Datalogger with automatic temperature compensation. The SDL900 utilizes Hall effect sensor. This meter features an adjustable data sampling rate from 1 to 3600 seconds. Complete with uniaxial magnetic probe sensor with protective cover, SD memory card, 6 AA…

The PGT120.CU device is designed to facilitate easy, in-house, calibration verification of Wolfgang Warmbier PGT120 Series ESD Combo Testers. The PGT120.CU is designed to verify that testers calibrated to ANSI/ESD S1.1-1998 and ANSI/ESD STM9.1-2001 so it works with most makes of test equipment.…

Pair the PGT120.COM tester unit with the 7100.PGT120.COM.TC18 Touch Screen and Data Terminal and you receive real-time ESD testing with personnel identification, access control and central data maintenance. Also connect to a number of accessories such as a label printer, bar code scanner, RFID,…

Variable control from zero output to 95% line voltage. A voltage limit rear mounted center-off switch is used to select a 40v or 120v maximum output with the control knob on. 0-10 ammeter 5% accuracy F.S. NOT recommended for heaters rated less than 120 volts. Warning glow light mounted next to…

Key Features Detects between 100 V AC to 69,000 V AC Can be used in 5 ways - around the neck, clipped to front jacket pocket or belt, in the hand, on an arm and on a hot stick Allows hands free operation for work tasks by using a safety break-away neck lanyard or clipped or strapped…

The METRISO® B530 ESD-Audit-Kit includes the relevant test instruments and equipment needed to perform ESD audits according to ANSI ESD.2020 and IEC 61340-5-1 and for qualification / verification of ESD control elements. The kit is built around the METRISO® B530 digital high resistance meter. …

Test and graph the performance of ESD floors in combination with a person per ANSI/ESD STM 97.2. and IEC Standard 61340-4-5. The WT5000 Walking Test Kit has been designed to perform a voltage measurement of floor materials and footwear in combination with a person according to ANSI/ESD STM 97.2.…

Dual-channel Oscilloscope with 3.8" (97mm) color LCD display Auto-set function optimizes the position, range, timebase, and triggering to assure a stable display of waveforms Peak Detect function for 50ns glitch capture XY Mode and FFT function to view component frequencies …

Simply approach the source at any angle and the triple-axis meter automatically determines EMF (electro magnetic frequencies), eliminating the need for additional calculations. X, Y, and Z axis results can also be viewed independently. Measures electro magnetic fields of extremely low frequency…

Extech’s SP505 measures solar power level from outdoor sunlight to determine the best location of solar panel and solar water heater installations. It is also used indoors by window manufacturers, automotive industry, and remodeling home owners to check the level of solar radiation…

The CM2815 Series dual conductor workstation monitor provides complete ESD protection to two operators by monitoring both resistance and voltage independently using dual conductor wrist strap. It also monitors ESD mat ground and low resistance of tool chassis' ground simultaneously. Utilizing…