The Duo provides two water qualities within one easy to use system - Types 1 & 2. The system is fed from mains water and produces Type 2 - DI water into a reservoir size of your choice. Choose a Type 2 production rate to suit your requirements, 10 or 20 liters per hour.
Type 1, Ultrapure water at 18.2 MΩ-cm is produced swiftly on demand from the integrated dispenser or optional remote dispenser at up to 2 liters per minute. The output can either be continuous or volumetrically dispensed with an intuitive and simple software control.
The Duo is a space saving solution with all your quick-change consumables integrated into one unit.
Dispense options
- Ultrapure water directly from the unit
- Ultrapure water from a remote dispenser
- DI water from the reservoir
Features
- Space saving with 2 water qualities from one unit
- Fast variable dispense of ultrapure water – up to 2 liters per minute
- Quick-change consumables with realistic costs
- Easy to use software
- Quiet operation
- Comprehensive monitoring of water quality including TOC (Total Organic Carbon)
- Bench, wall or reservoir top mounting
- Choice of production rates into the reservoir
- Choice of storage reservoir, 30, 60 or 100 liters
- Integral boost pump
The Duo produces Type 2 water up to 160 liters per day into your chosen reservoir. Type 2 water is used for buffer and media production, sample and reagent diluent, general chemistry, protein electrophoresis, histology, cytology and spectrophotometry.
The Duo also produces Type 1 water. Type 1 water is used for molecular biology, electrophoresis, cell and tissue culture, sequencing, HPLC, genomics, pharmacology and any other sensitive applications. Total Organic Carbon (TOC) monitoring is critical where organics affect results, so a real time TOC reading will provide absolute confidence in your water quality.
Duo Tap Water Feed
Type 1 and 2 water from a single system
Dual system functionality:
- Laboratory water (Type 2) on demand from reservoir
- Ultrapure water (Type 1) from dispenser on the system or remote dispenser
- 10 or 20 liters per hour Type 2 water produced into storage reservoir
- Ultra-pure water flow-rate up to 2 liters per minute
- Laboratory water: 1-15 MΩ-cm
- Ultrapure water: 18.2 MΩ-cm water quality
- >50% recovery of RO water
- SD card interface
- Novel recirculation process extends life of RO membrane and DI cartridges
- Minimum 1.45 psi feed pressure required as in-built boost pump deals with low pressure. External pump is not necessary.
- Continuous TOC monitoring with display
- Up to 98% rejection of inorganics
- Wall mounting bracket included
- On-bench, under-bench, wall or reservoir-top mounting
- First set of consumables included
- Easy access to change filters
- Volume controlled dispensing
- Comprehensive and continuous water quality monitoring
- Choice of 30/60/100 liter capacity reservoir
Dimensions (W x H x D): 19.29 x 26.37* x 11.41"
*To the top of Dispense Gun, height to the top of the Dispense tube curve is 28.74”
Annual Consumable Kits (sold separetely) includes:
| Duo 10 TOC | Duo 10 TOC UF | Duo 20 TOC | Duo 20 TOC UF |
Pre-treatment module (2) | TC001 | TC001 | TC001 | TC001 |
Endure purification pack 1 (2)* | TC002 | TC002 | TC002 | TC002 |
Internal UV lamp (1) | TC003 | TC003 | TC003 | TC003 |
Endure purification pack 2 (1)* | TC009 | TC009 | TC009 | TC009 |
POU endotoxin filter (2) | | TC004 | | TC004 |
POU filter (2) | TC011 | | TC011 | |
Sanitisation pack (1) | TC007 | TC007 | TC007 | TC007 |
(Reservoir) vent filter (1) | TC005 | TC005 | TC005 | TC005 |
*Estimate only depends on water usage.
Services required
- 3/4" BSP isolated cold water feed (washing machine tap/valve)
- 240 Volt, 13 Amp sockets
- Drain/up-stand with trap or sink
Installation Kit includes:
- 79" drain tube
- 79" feed water tube
- 79" product supply tube
- 3/4" BSP adaptor for supply
- Wall mounting brackets
- Instructions for wall mounting
- Manual (USB Stick format)