Viscometers

Page 1 of 3
  • Image of Adapter Plate

    Adapter Plate

    Item #: 9731F90
    Metal; for adapting the 9730F10 General Purpose Viscometer Outfit to accommodate a can of corn or similar container, up to 102 mm diameter, on the movable platform
  • Image of Hanger 50Gram 20cm

    Hanger 50Gram 20cm

    Item #: 9731H15
    As supplied with Stormer® Viscometer weight set, but also usable for simple machine and pulley experiments Height: 198 mm. Weight: 50 grams. Tolerance: ±4 mg.
  • Image of Thomas ETS-2000 Digital Viscometer

    Thomas ETS-2000 Digital Viscometer

    Makes viscosity measurements in paints and coatings Direct readouts in Krebs units, grams and centipoise Accurate to ±1% of range Results reproducible to ±0.5% of range The ETS-2000 digital viscometer features expanded measurement ranges of 40 to 141 KU, 32 to 1099 g and 27 to 5274...
  • Image of Thomas Stormer Rotational Shear Viscometer, Calibrated Paint Testing Outfit

    Thomas Stormer Rotational Shear Viscometer, Calibrated Paint Testing Outfit

    Calibrated Paint Testing Outfit With paddle-type rotor, for determining the viscosity (or consistency) of paints In accordance with ASTM Standards D 562, D 816, D 856, D 1084, D 1131, D 1337 and D 1338, Federal Test Standard 141A methods 3011.1, 3012, 3018, 3019, 3022 and 4281 and Federal...
  • Placeholder Image for Thomas Stormer Viscometer Accessories

    Thomas Stormer Viscometer Accessories

  • Image of Thomas Zahn Signature Series S90 Viscosity Cups

    Thomas Zahn Signature Series S90 Viscosity Cups

    Made of polished stainless steel Looped handle and finger ring Calibrated with Cannon viscosity standards traceable to NIST; Cannon standards are produced in accordance with ISO 90002 Each cup is furnished with the mathematical formula for calculating the viscosity in centistokes using efflux time...
  • Image of Weights For Stormer Viscometers

    Weights For Stormer Viscometers

    The 20-gram weight has a tolerance of ±2 mg; 50 gram, ±4 mg; 100 gram, ±6 mg; 200 gram, ±8 mg; and 500 gram, ±14 mg.
  • Image of Automatic Temperature Bath Controller

    Automatic Temperature Bath Controller

    Range: Ambient to 315°C Resolution: 0.1°C Assures precise temperature regulation to 0.2°C after temperature stabilization. Select °F or °C with the push of a button.
  • Image of Bath Oil, 6-Gallon Container

    Bath Oil, 6-Gallon Container

    Item #: 9726L20
    Contains an oxidation inhibitor which reduces tendency to darken at higher temperatures For use below 135°C (275°F) For higher temperature requirements, see Thomas number 6428R25.
  • Image of Bubble Viscometers

    Bubble Viscometers

    Yields accurate kinematic viscosity data quickly and easily using the Alphabetical Comparison Method (upward speed of a trapped air bubble) Conforms to ASTM D 1131, D 1545 and D 1725 Standard tubes easily identified by large letters Quick and easy cleaning Viscosity of the liquid sealed in each...
  • Image of Calibrated EZ Viscosity Cups

    Calibrated EZ Viscosity Cups

    EZ=Equivalent Zahn; 3% Guaranteed tolerance; complies with and exceeds ASTM D 4212 All stainless steel cup and handle Oil used to standardize EZ Cups is produced in accordance with ISO 9002 The EZ cup formula for each cup of the series matches the applicable ASTM formula in D 4212 at the...
  • Image of CBC Bath Coolers

    CBC Bath Coolers

    Thermoelectrically cool baths up to 15°C below ambient 1/10 the size of standard refrigeration units Power consumption of only 250 watts Simple to operate with low maintenance Cooling fans are the only moving parts CBC bath coolers consist of a thermoelectric cooling unit and a separate power...
  • Image of Consistometer, Bostwick

    Consistometer, Bostwick

    Item #: 9739A01
    Made of stainless steel With two leveling screws and a level Spring-operated gate held by positive release mechanism, allowing instantaneous flow of sample Trough graduated on 0.5 cm divisions to permit precise measurement of flow Overall dimensions: 14 x 3 x 5 inches. Requires 75 mL sample.
  • Image of Consistometer Flow Rate Bostwick

    Consistometer Flow Rate Bostwick

    Item #: 1227Q21
    The consistometer is a bench top device used for accurately checking laboratory or production samples against consistency, viscosity or flow rate standards. While using little bench space, it provides a simple, accurate method of conducting a variety of flow associated tests. It can be used in...
  • Image of Drawer Unit for CT-500, CT-1000 and TE-1500

    Drawer Unit for CT-500, CT-1000 and TE-1500

    Item #: 9726A50
    Sturdy two-drawer unit fits beneath the Constant Temperature Bath Provides elevated viewing of the bath and ample room for storage of viscometers and other accessories. Overall dimensions: 457 mm wide x 457 mm deep x 165 mm high. Weight: 24 lbs.
  • Image of DSR Temperature Probe

    DSR Temperature Probe

    Item #: 9728V95
    Measures temperatures between 0°C and 80°C in the sample area of dynamic shear rheometers, such as those specified for use by SHRP The probe consists of a tiny thermistor mounted within a thin 25 mm disk made of silicone rubber. When the probe is inserted between the plates of a dynamic...
Page 1 of 3