labconco hoods

Equipment

Manufacturer

Exterior L x W x H, cm (in)

Horizontal or Vertical

I.D. Inlet

Interior L x W x H, cm (in)

L x W x H, cm (in)

Recently Viewed Categories

Hoods

Page 1 of 9
  • Image of Basic 47 & Basic 70 Fume Hoods

    Basic 47 & Basic 70 Fume Hoods

    Ideal for rooms with ceilings under eight feet or shallow counter tops 3/16" tempered safety glass counterbalanced sash 10" diameter duct collar Powder-coated 16 gauge steel liner and exterior Hoods include a removable front panel, a removable air foil, a two-piece adjustable baffle, a...
  • Image of Class II, Type A2 Purifier Cell Logic Biological Safety Cabinets

    Class II, Type A2 Purifier Cell Logic Biological Safety Cabinets

    Purifier Cell Logic Class II, Type A2 Biosafety Cabinets are specially designed with cell researchers in mind, while also providing protection from hazardous particulates such as agents that require Biosafety Level 1,2 or 3 containment. Purifier Cell Logic Biosafety Cabinets featuring the...
  • Image of 45° Elbows

    45° Elbows

    45º PVC Elbows. Compatible with thermoplastic duct. Designed and engineered for quick installation and minimum pressure loss. Feature belled end connections to receive PVC duct directly.
  • Image of N2 Spray Gun Assembly

    N2 Spray Gun Assembly

    N2 Gun in spray gun configuration, with 7 foot coiled hose and fittings for N2 supply hookup, filter housing and one each disposable TACODISC Filter and front or rear trigger. PTFE NITROGEN GUNS deliver the optimum in anti-corrosion protection and long lasting duty wherever harsh chemicals are used...
  • Image of 90° Elbows

    90° Elbows

    90º PVC Elbows feature belled end connections to receive Thermoplastic Duct or Male Duct Coupling directly. Designed and engineered for quick installation and minimum pressure loss.
  • Image of Class II, Type B2 Purifier Cell Logic Biological Safety Cabinets

    Class II, Type B2 Purifier Cell Logic Biological Safety Cabinets

    Purifier Cell Logic Class II, Type B2 Biosafety Cabinets are specially designed with cell researchers in mind, while also providing protection from hazardous particulates such as agents that require Biosafety Level 1,2 or 3 containment. Purifier Cell Logic Biosafety Cabinets featuring the...
  • Image of Fiberglass 30 Laboratory Hood

    Fiberglass 30 Laboratory Hood

    Item #: 5165H24
    Corrosion-resistant, molded one-piece fiberglass liner 3/16” thick tempered safety glass sash with powder-coated handle By-pass airflow design The compact Fiberglass 30 Laboratory Hood is designed for efficient fume removal in labs with small space. Right side fixture panel is factory-prepared for...
  • Placeholder Image for DI Water Spray Gun - Recirculating

    DI Water Spray Gun - Recirculating

    The Recirc has a fluid path free of all undesirables such as o-rings, o-ring lubricants, metal springs or porous materials. Further the Gun itself and all component parts coming into contact with the fluid are fabricated from high density PTFE for total purity. In short there are no materials or...
  • Image of N2 Spray Gun Assembly - Straight Line

    N2 Spray Gun Assembly - Straight Line

    Item #: 1218Q90
    Standard N2 Gun spray gun with 7 foot coiled hose and fittings for N2 supply hookup, filter housing and one disposable TACODISC Filter. PTFE NITROGEN GUNS deliver the optimum in anti-corrosion protection and long lasting duty wherever harsh chemicals are used in the vicinity of N2...
  • Image of Duct Couplings

    Duct Couplings

    PVC Duct Coupling connect two sections of Thermoplastic Duct.
  • Placeholder Image for 30 Laboratory Hoods

    30 Laboratory Hoods

    30 Laboratory Hood Fiberglass 30 Laboratory Hood; bypass airflow design; one piece molded, corrosion-resistant fiberglass exterior liner; 3/16" thick clear tempered vertical-rising safety glass sash, pivoting air foil; right side fixture panel factory-prepared to accept up to three service...
  • Image of Benchtop Environmental Air Control

    Benchtop Environmental Air Control

    Provides horizontal laminar flow of Class 100 air; flow rate 40 to 100 fpm (0.2 to 0.6 m 3 /s) Solid state speed control, permanently lubricated, 1/3 hp (249 W) motor which is internally protected against thermal overload and balanced, direct drive blower Meets Federal Standard 209-B Prefilter is...
  • Placeholder Image for Nitrogen Spray Gun Hose

    Nitrogen Spray Gun Hose

    Item #: 1218Q91
    7 foot flexible coiled hose. 1/8 ID, 1/4 OD.
  • Image of Portable Benchtop Fume Hoods

    Portable Benchtop Fume Hoods

    Inexpensive alternative to installed fume hoods Installation is fast and easy - no tools required Take up minimal bench space Filters have seamless gaskets Portable fume hoods are constructed of easy to decontaminate polypropylene and acrylic. Each hood contains a single speed thermally protected...
  • Image of Protector Premier Laboratory Hoods

    Protector Premier Laboratory Hoods

    Built-in belt-driven, corrosion-resistant exhaust blower with adjustable sheave, molded thermoplastic housing and nonsparking,coated aluminum impeller. By-pass airflow design. Ergonomic air foil with aerodynamic Clean-Sweep* airflow openings. Glacier white, dry powder epoxy-coated steel exterior....
  • Placeholder Image for Nitrogen Spray Gun Hose w/ Fittings

    Nitrogen Spray Gun Hose w/ Fittings

    Item #: 1218Q92
    7 foot flexible coiled hose with male 1/4" fittings on both ends. 1/8 ID, 1/4 OD.
Page 1 of 9