Clamps/Supports

Page 1 of 7
  • Image of Ratchet Tool

    Ratchet Tool

    Item #: 1231B25
    The Ratchet tool is designed to add extra leverage to 12" x 12" or 16" x 16" units. The tool easily attaches to the actuating rod for easy and accurate adjustments.
  • Image of 17" Support Rod Kit

    17" Support Rod Kit

    Item #: 1231B26
    17" Support Rod Kit is ideal for creating an adjustable support stand to mount various items such as thermometer clamps, temperature probes, flasks and column clamps. The kit allows users to mount a 17" vertical support rod to the deck of a 6" x 6", 8" x 8" or 10"...
  • Image of Thomas Aluminum Lab-Lifts

    Thomas Aluminum Lab-Lifts

    Anodized aluminum construction Three sizes Convenient Thomas Aluminum lab-lifts provide stable height adjustment for lab items such as flasks, baths and small equipment weighing up to 45 lbs. Aluminum lab-lifts come in three sizes: 4” x 4”, 6” x 6” and 8” x...
  • Image of Thomas Heavy-Duty Stainless Steel Lab-Lifts

    Thomas Heavy-Duty Stainless Steel Lab-Lifts

    Exceptional stability and control Stainless steel construction Seven sizes for any application Autoclavable and chemical-resistant Thomas heavy-duty stainless steel lab-lifts are very stable lifting platforms that offer exceptionally high strength and durability. Constructed of stainless...
  • Image of Adapter, Ball Joint

    Adapter, Ball Joint

    Item #: 8847V02
    Made of glass-filled nylon Ball joint is mounted on a rotating base for positioning anywhere in a full hemisphere Large wing nut operates a heavy cam that locks work in place At each end is a male connector for mounting adapter on lattices or stands and for holding any of the stronghold clamps at...
  • Image of Clamp

    Clamp

    Item #: 2848D13
    Of heavy zinc-alloy die casting with closed jaw with nickel-plated brass compression screws Jaw opening 7/8”; side post may be unscrewed to insert tubing. Lower bearing surface is concave; upper surface is convex, producing a slight bend in tubing so that flow is shut off completely without...
  • Image of Clamp, Lattice

    Clamp, Lattice

    Item #: 8847S05
    Of glass-filled nylon Has two open sides which take (and lock in place, at right angles) rods up to 1/2” (13mm) diameter Locking screws are M5 (5 mm) thread Allen set screws 1/2” (13 mm) long; without rod
  • Image of Connector, Closed

    Connector, Closed

    Item #: 8847E25
    Of glass-filled Nylon with stainless steel thumbscrew shafts For connecting two rods up to 1/2 inch (13 mm) diameter at right angles or parallel to one another Can be positioned anywhere along length of rod Rods held in place by separate thumbscrews Two of these connectors can be used together to...
  • Image of Connector, End-to-End

    Connector, End-to-End

    Item #: 8847E15
    Of glass-filled Nylon with stainless steel thumbscrew shafts For joining rods of the same or varying diameters, end to end Takes rods up to 1/2” (13 mm) diameter Center barrier within connector prevents rods from touching Each rod held by separate thumbscrew Includes two thumbscrews. Without...
  • Image of Connector, Open-Sided

    Connector, Open-Sided

    Item #: 8847E05
    Of glass-filled Nylon with stainless steel thumbscrew shafts Holds rods or clamp stems up to 1/2” (13 mm) diameter at right angles to each other Open-sided; can be removed without disturbing support Includes two thumbscrews and 1/2” (12 mm) swivel adapter. Without rods.
  • Image of Connector, T-Type

    Connector, T-Type

    Item #: 8847U02
    Made of glass-filled nylon For mounting clamps and adapters that have a male connector to vertical lattice rods or laboratory stands One end has open side to clamp rod up to 1/2” (13 mm) diameter and lock with thumbscrew. Opposite end has female socket 3/4” (19 mm) deep that takes male...
  • Image of Electrode Support Clamp

    Electrode Support Clamp

    Item #: 2824B46
    Permits electrode suspension at any desired level or angle. Integral post clamp accepts up to 21 mm diameter rod. Overall length is 14.7 cm
  • Image of Labjaws Aluminum Frame Rods

    Labjaws Aluminum Frame Rods

    Centerless ground for precision fit and chamfered ends for easy assembly. Hard tempered surface is corrosion resistant and has a melting point of 1100 °F. 13 mm diameter rods are available up to 244 cm long.
  • Image of Labjaws Connectors And Mounting Brackets

    Labjaws Connectors And Mounting Brackets

    Rod End Connector (2824E29) Holds 13 mm rods firmly at a 90° angle. Superior holding power for semi-permanent installations. S-Connector (2824E33) Clamps lab frame rods at 90° angle. Twin angled screws allow independent rod adjustment and easy access. Nickel plated cast zinc construction. Hook...
  • Image of Labjaws Double Jaw Utility Clamp

    Labjaws Double Jaw Utility Clamp

    Item #: 2824B26
    Two-prong single adjust style tightly controls distances between glassware. Clamp swivels 360° and locks securely into position. Two jaw sizes; one up to 65 mm; the other up to 80 mm. 20 cm center to center distance.
  • Image of Labjaws Fiberglass Frame Rods

    Labjaws Fiberglass Frame Rods

    Exceptional strength and shock resistance. Resistant to clamping scars. Provide excellent electrical isolation and thermal stability. Non-corrosive surface will not rust and has low flammability. Uniform 13 mm diameter, up to 244 cm feet long with chamfered ends.
Page 1 of 7