Burners

Page 1 of 2
  • Image of Alcohol Lamp

    Alcohol Lamp

    135 ml capacity Conical, low profile design is more stable and much safer than glass alcohol lamps Supplied with snuffer cap and one extra wick Height: 8.9 cm (31⁄2") Diameter: 10.2 cm (4") Two Way Lamp Stand Used to vary distance between heated vessel and alcohol lamp Height is...
  • Image of Standard Burners with Air Regulators

    Standard Burners with Air Regulators

    For 800-1200 BTU (845 to 1265 kJ) gases Aluminum burner tube, 1/2" (13mm) diameter, has air regulator collar and 17.5 mm stabilizer top Die-cast 79 mm base has serrated 8 mm inlet tube; overall height 6 1/8” Conforms to Federal Specification NNN-B-795 Humboldt Bunsen Burners are high-quality,...
  • Image of Electric Bunsen Burner

    Electric Bunsen Burner

    Combines the efficiency of a gas burner with the safety and control of an electric heater Radiant heat is only directed upwards Can be placed on benchtop or hand held Constructed of corrosion resistant metal Used for heating test tubes, crucibles, small flasks and beakers. The easily replaceable...
  • Image of Gasprofi Laboratory Gas Burners

    Gasprofi Laboratory Gas Burners

    Safer than Bunsen burners, ensures the maximum level of laboratory safety Unique safety features Two-year manufacturer's warranty All stainless steel exterior construction provides optimum sterility Each unit includes a SS windshield (2069N54) Conforms to CE, DIN 30665 Part 1 and GS-DVGW Safety...
  • Image of High Temperature Burners, Meker Type

    High Temperature Burners, Meker Type

    Designed to prevent backflashing Nickel-plated, injector-shaped tube with monel grid produces short, uniform flame with no cold cones Overall height 8 1/2”; grid 1 1/2”; backed with monel wire mesh Complies with Federal Specification NNN-B-795 Octagonal base 3 3/8”diameter with...
  • Placeholder Image for L.P. Gas Bunsen Burner

    L.P. Gas Bunsen Burner

    Item #: 2064F50
    Aluminum burner tube, 13 mm diameter, has air-regulator collar and 17.5 mm stabilizer top Die-cast 3 1/8 inch base has serrated 8 mm inlet tube; overall height 6 1/8 inches Conforms to Federal Specification NNN-B-795
  • Image of National Blast Burner

    National Blast Burner

    Useful for working glass or quartz, soldering, brazing or high intensity spot heating For artificial, mixed or straight natural and liquefied petroleum gases up to 3,200 BTU (3375 kJ), also acetylene with oxygen or air Hand torch has well-balanced handle of molded plastic Includes two...
  • Image of Natural Gas Bunsen Burner

    Natural Gas Bunsen Burner

    Item #: 2064K10
    With collar for air regulation, stabilizer top and stopcock Without base, for direct attachment to gas supply pipe With 3/8 - 27 machine thread for use on a fitting with 1/8 inch i.p. thread Diameter of tube 1/2”; height 6 1/2”
  • Image of Natural Gas Micro Burner

    Natural Gas Micro Burner

    Item #: 2068E15
    Nickel plated brass inlet with nickel-plated zinc-alloy base With flame stabilizer and fixed orifice Aluminum mixing tube 11 mm o.d. Overall height 3 1/2” Serrated gas inlet connection
  • Image of Self-Starting Micro Torch Burner

    Self-Starting Micro Torch Burner

    Small, portable, lightweight unit with built-in piezoelectric crystal for ignition Operates on butane gas Maximum flame temperature 1,300°C (2,400°F) Flame lasts up to two hours on a full charge of butane; reservoir capacity 26 grams Flame adjusted by means of needle valve and gas flow control...
  • Image of Tirrill Type Natural Gas Burner

    Tirrill Type Natural Gas Burner

    Item #: 2066D10
    With needle valve for gas and threaded sleeve for air regulation to give best flame control Aluminum burner tube 13 mm diameter has 7.5 mm stabilizer top Die-cast 3 5/8” base has serrated 9.5 mm inlet tube; overall height 6” Conforms to Federal Specification NNN-B-795   
  • Image of Touch-O-Matic Bunsen Burner

    Touch-O-Matic Bunsen Burner

    Item #: 2067H15
    Operates up to 3200 BTU (3375 kJ) “On-off” platform serves as a comfortable hand rest and eliminates tedious holding of objects in mid-air Removable and rotatable shield protects the pilot and flame from drafts Spring-loaded valve operates by pressure on a 57 mm hand rest for flaming...
  • Image of Ultratorch 3 Multi-Purpose Burner

    Ultratorch 3 Multi-Purpose Burner

    Item #: 2073H30
    Employs interchangeable heads to function as a soldering iron, hot air blower or burner Maximum working temperature 1260°C when set up for use as a burner for small brazing, welding or silver soldering jobs on brass, copper, etc.; when fitted with soldering tip, it reaches a maximum temperature...
  • Image of Wheaton Alcohol Burner

    Wheaton Alcohol Burner

    Ground glass cap Wheaton 400 borosilicate glass Supplied with glass stopper Low heat flame is well-suited for microscopy purposes. Dimensions: 75 Dia. x 100 H mm; 100 mL .
  • Placeholder Image for Gasprofi Laboratory Gas Burner Accessories

    Gasprofi Laboratory Gas Burner Accessories

  • Image of National Blast Burner Tips

    National Blast Burner Tips

    Type N tips are used with compressed air Type OX tips are used with oxygen
Page 1 of 2