Composition: Pyridine 80.86%, Phthalic Anhydride 16.57%, Imidazole 2.57% Density: 1.0353 Color: Colorless to slightly yellow liquid Physical State: Liquid Shelf Life: 12 Months Storage: Ambient DOT: UN1282, PYRIDINE SOLUTION, 3, P.G. II

Electrode cleaning solution for removal of membrane/junction protein deposits. Application: For Removal of Membrane/Junction Protein Deposits

CAS Number: 2386-64-3 Formula: C2H5ClMg Formula Weight: 88.82 Linear Formula: CH3CH2MgCl MDL No.: MFCD00000472 Density: 0.978 g/mL at 25 C Beilstein Registry Number: 3647886 UNSPSC Code: 12352103

Concentration: 0.100M Composition: Water 96.34%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 3.66% Boiling Point: Approximately 100°C Density: 1.02 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …

Ensure accurate readings by using Oakton solutions with your DO meter. Replacement electrolyte should be used whenever you replace the membrane or membrane cap. Mix your own electrolyte solution—makes 400 mL. Has longer shelf life in unmixed form.

CAS: 75-04-7 EC No: 200-834-7 MDL No: MFCD00008160 RTECS: KH2100000 UN No: UN2270; Haz Class: 3 (8); Packing Group: II Liquid Linear Formula: CH₃CH₂NH₂ MW: 45.08 Flash Point: -17°C (1°F) Density (g/mL): 0.810

The LabChem 0.005 M ethylenediaminetetraacetic acid is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only

Empirical Formula: C₄H₇N₃O₂ Linear Formula: N₃CH₂COOCH₂CH₃ Formula Weight: 129.12 MDL Number: MFCD00190177 Beilstein Registry Number: 4247209

Boiling Point: 100°C Color: Colorless liquid Composition: Water 99.26%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.75% Concentration: 0.02M DOT: NOT REGULATED. Density: 1 Melting Point: 0°C Physical State: Liquid Shelf Life: 18 Months Solubility Information:…

The LabChem electrode storage solution is completely non-flammable and dissolves easily in water. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only

Storage: -20C UNSPSC Code: 12352200 Application: Extraction Solution has been used in direct PCR amplification and to extract DNA.

The Ricca Chemical EDTA decontaminating solution works as a masking agent during the analysis of water hardness and also in complexometric titrations.

Synonym(s): EDTA solution Formula: C₁₀H₁₆N₂O₈ Formula Weight: 292.24 CAS No.: 60-00-4 Application: A chelator used to remove calcium from cell washing and suspension media. Reduces cell clumping. Physical form: Solution in Dulbecco′s…

MDL Number: MFCD00011647

Reference electrolyte for pH electrodes (3M KCl solution saturated AgCl, 30 mL).

Synonyms: Aminoethane; Monoethylamine CAS Number: 75-04-7 Formula: C2H7N Formula Weight: 45.08 Linear Formula: C2H5NH2 MDL No.: MFCD00008160 Density: 0.81 g/mL at 20 C; 0.783 g/mL at 25 C Storage: 2-8C Beilstein Registry Number: 505933 UNSPSC Code: 12352100 General…

Synonym(s): 1-Hydroxyethane-1,1,-diphosphonic acid; 1-Hydroxyethylidenediphosphonic acid; HDEPA; HEDP; OEDFK Formula: CH₃C(OH)[PO(OH)₂]₂ Formula Weight: 206.03 CAS No.: 2809-21-4 Other Notes: Tandem Mass Spectrometry data independently generated by…

The LabChem 1% alcoholic eosin Y exhibits good solubility in most substances and features a highly flammable formulation. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only

EDTA (Ethylenediaminetetraacetic acid)

The LabChem 0.05M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only

The Exaxol EDTA disodium 0.500 N (0.250 M) is mainly used in research facilities and chemical laboratories to conduct wide range of experiments. It is available in sturdy bottle that endures heavy and rigorous usage. Application: For Laboratory use only Tested in an ISO 17025 accredited…

Concentration: 0.01M Composition: Water 99.63%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 0.37% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…

pharmaceutical secondard standard; traceable to PhEur

Ensure accurate readings by using Oakton solutions with your DO meter. Replacement electrolyte should be used whenever you replace the membrane or membrane cap.

The LabChem 0.1M ethylenediaminetetraacetic acid in liquid form, is soluble in water. It is non-flammable and has odorless odor. Application: For Laboratory and Manufacturing Use Only

Storage Temperature: 2-8°C

Concentration: 0.0575M Composition: Water 97.88%, Ethylenediaminetetraacetic Acid (EDTA), Disodium Salt, Dihydrate 2.12% Boiling Point: Approximately 100°C Density: 1.01 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible …

The Exaxol 0.1N EDTA disodium features a metal-free formulation and comes in an impact-resistant bottle. It is mainly designed to use in chemical laboratories and research facilities. Application: For Laboratory use only Tested in an ISO 17025 accredited laboratory Standardized at 25 deg C to…

Empirical Formula: C₇H₁₃BrO₂Zn Linear Formula: C₂H₅O₂C(CH₂)₄ZnBr Formula Weight: 274.47 MDL Number: MFCD00671978 Density: 0.978 g/mL at 25 °C Storage: 2-8°C

The Ricca Chemical eosin Y TS with a composition of 99.51% water and 0.50% eosin Y, is suitable for use as adsorption indicator for argentometric titrations. It can be stored at a temperature of 15 to 30 degree C. Application: Adsorption Indicator For Argentometric Titrations

MDL Number: MFCD00011647