Lab & Chemical Salts
-
-
Silver Nitrate, 0.050N, Standardized
Reagents®Concentration: 0.05N Composition: Water 99.16%, Silver Nitrate 0.84% Boiling Point: 100°C Density: 1.01 Melting Point: 0.0°C Color: Colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient DOT: NOT REGULATED.
-
Fluka Calcium carbonate ACS reagent, =99.0%, powder
Honeywell Research ChemicalsDensity (g/cm3): 2.93 Molecular weight: 100.09 Molecular formula: CaCO3 Chemical purity: =99.0%
-
Sodium Dodecyl Sulfate
AFG BioscienceCAS No : 151-21-3 Synonym : Sodium dodecyl sulfate ; SDS Grade : NF/EP/USP Purity Limit : ≥ 97% (Assay) Molecular Formula : C12H25O4SNa Molecular Weight : 288.38 MDL No : MFCD00036175 Appearance : Free flowing powder Density : 0.37 Flash Point : 180ºC Melting Point :…
-
The LabChem hydroxylamine hydrochloride comes in a crystalline form and is perfect to use as a catalyst in a chemical laboratory. Application: For Catalyst
-
Sodium Hydroxide, 10.0N
chemForce® (powered by Thomas Scientific)Harmonized #: 2815.12.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.33 DOT: UN1824, SODIUM HYDROXIDE SOLUTION, 8, II Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient …
-
Lithium Chloride
MP BiomedicalsUsed as an electrolyte for low temperature dry battery cells and as an oxidation catalyst. It is a solubilizer for polyamides and cellulose when used with amide solvents, and is a chlorinating agent for steroid substrates. Lithium chloride has also been utilized in: Large scale plasmid DNA…
-
Histamine Dihydrochloride
Bio Basic Inc.The Bio Basic Histamine Dihydrochloride with a composition of 95-100% 2-Imidazol-4-ylethylamine Dihydrochloride, is suitable for use in laboratory use only. It can be stored at a temperature of 2 to 8 degree C. Application: For Laboratory Use Only
-
Ammonium Chloride
AFG BioscienceCAS No : 12125-02-9 Grade : ACS Reagent Purity Limit : ≥ 99.5% (Assay) Molecular Formula : NH4Cl Molecular Weight : 53.49 MDL No : MFCD00011420 Appearance : White crystalline powder Density : 1.53 Melting Point : 335 ºC (Approx.)-(Sublimation Point) Storage Temp : Room…
-
LabChem Sodium Thiosulfate
LabchemThe LabChem sodium thiosulfate is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Sodium Hydroxide, 0.10N
chemForce® (powered by Thomas Scientific)Harmonized #: 2815.12.0000 0000 Shelf Life (months): 24 Specific Gravity: 1.00 DOT: Not regulated Appearance: Colorless Physical State: Liquid Flash Point: Not applicable Solubility: Miscible Storage Temperature: Ambient Storage Code: General
-
Sodium Chloride, Purified
Reagents®Composition: Sodium Chloride 100% Grade: Purified Boiling Point: 1461°C CAS Number: 7647-14-5 Density: 2.17 Chemical Formula: NaCl Molecular Weight: 58.44 g/mol Melting Point: 801°C Color: Colorless/white solid Physical State: Solid pH Range: 5 to 9 Solubility Information: 360…
-
Fluka Potassium persulfate ACS reagent, =99.0%
Honeywell Research ChemicalsChemical name: Potassium persulfate Chemical synonyms: Potassium peroxodisulfate Material form: Solid Molecular weight: 270.32 Molecular formula: K2O8S2 Chemical purity: =99.0% UN Number: UN 1492
-
Synonyms: PEP·3Na·7H2O Purity Limit: ≥ 99% (Assay by Titration) CAS No.: 5541-93-5 Molecular Formula: C3H2O6P·3Na·7H2O Molecular Weight: 360.09 MDL No.: MFCD00150737 Appearance: White to off-white crystalline powder Storage Temperature: Store at 0-8 °C
-
RPI Magnesium Sulfate Anhydrous
RPI (Research Products International)The RPI magnesium sulfate anhydrous with strong concentration levels should always be stored in a room temperature and is used in research and manufacturing applications. Application: For Research or Further Manufacturing use only
-
Lead Acetate Trihydrate, Technical
Reagents®Composition: Lead Acetate Trihydrate 100% Grade: Technical Boiling Point: 100°C (decomposes) CAS Number: 6080-56-4 Density: 2.55 Chemical Formula: Pb(C2H3O2)2.3H2O Molecular Weight: 379.33 g/mol Melting Point: 75°C Color: Colorless/white solid Physical State: Solid Solubility…
-
Benzalkonium Chloride
MP BiomedicalsBenzalkonium Chloride is a quaternary ammonium salt. It is a cationic surface active agent and germicide. It is not effective against gram-negative bacteria or picornaviruses and it is not recommended for treatment of sanitizing critical or semicritical medical instruments. It has been reported…
-
-
LabChem Lanthanum Oxide
LabchemThe LabChem lanthanum oxide is non-flammable in nature and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Concentration: 25% w/v Composition: Water 78.67%, Sodium Hydroxide 21.33% Boiling Point: Approximately 100°C Density: 1.23 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 14 Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
Ammonium Acetate
AFG BioscienceCAS No : 631-61-8 Grade : ACS Reagent Purity Limit : ≥ 97% (Assay) Molecular Formula : C2H7NO2 Molecular Weight : 77.08 MDL No : MFCD00013066 Appearance : White fine crystals Melting Point : 114 °C (Approx.) Storage Temp : Room Temperature Additional Info : Buffer…
-
Cytidine-5'-diphosphate trisodium salt ; >/= 99%
AFG BioscienceSynonyms: 5'-CDP·3NaCytidine-5'-diphosphoric acid trisodium salt Purity Limit: ≥ 99% CAS No.: 34393-59-4 Molecular Formula: C9H12N3O11P2Na3 Molecular Weight: 469.12 MDL No.: MFCD00065201 Appearance: White crystalline powder Storage Temperature: Store at ≤-4°C
/= 99%"}' data-compare-data=""> -
Synonyms: NADPH·4Na Purity Limit: ≥ 97% (HPLC) CAS No.: 2646-71-1 Molecular Formula: C21H26N7O17P3Na4 Molecular Weight: 833.4 MDL No.: MFCD00036263 Appearance: Off-whitelyophilized powder Storage Temperature: Store at
-
Mercury(II) Thiocyanate For Analysis Reagent Ph Eur
MilliporeSigmaFormula: Hg(SCN)2 Grade: Reag. Ph Eur CAS No.: 592-85-8 pH: 5 (50 g/l, H2O, 20°C) (slurry) Solubility: 0.7 g/l (25°C) Melting Point: 165°C (decomposition) Molar Mass: 316.76 g/mol Bulk Density: 750 kg/m3 Flash Point: 120°C Refractive Index: 120°C Density: 3.71 g/cm3…
-
Ethylenediaminetetraacetic acid disodium salt dihydrate, 99%
BeanTown ChemicalCAS: 6381-92-6 EC No: 205-358-3 MDL No: MFCD00150037 RTECS: AH4375000 Powder Molecular Formula: C10H14N2Na2O8·2H2O MW: 372.24 Melting Point: 248° (decomposes)
-
Ricca Sodium Hydroxide (Pellets)
Ricca ChemicalSodium Hydroxide is a strong base in terms of chemical ionization and solutions of it can be assayed using a strong acid, such as Hydrochloric Acid or Sulfuric Acid, or by using an acidimetric standard such as Potassium Hydrogen Phthalate (KHP).
-
Concentration: 10% w/v Composition: Water 90.09%, Sodium Lauryl Sulfate 9.91% Density: 1.01 Color: Slightly hazy, colorless liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 12 Months Storage: Ambient DOT: NOT REGULATED.
-
Sulfur
Reagents®Composition: Sulfur 100% Grade: Sublimed Boiling Point: 444.7 °C CAS Number: 7704-34-9 Density: 2.06 Chemical Formula: S Molecular Weight: 32.07 g/mol Melting Point: 106.8°C Color: Yellow solid Physical State: Solid Flash Point: 207°C Solubility Information: insoluble Shelf…
-
LabChem Sulfamic Acid
LabchemThe LabChem sulfamic acid comes in a poly bottle container in a crystalline powder form. It is mainly used in laboratory and manufacturing factories. Application: For Laboratory Chemical, Chemical Intermediate
-
Concentration: 025% w/v Composition: Water 99.98%, Ferric Chloride Hexahydrate 02% Boiling Point: 100°C Density: 1 Melting Point: 0.0°C Color: Orange liquid Physical State: Liquid Solubility Information: Miscible Shelf Life: 24 Months Storage:…
-
The LabChem cobaltous chloride, hexahydrate comes in a crystalline form and is mainly used in laboratory and manufacturing factories. Application: For Laboratory and Manufacturing Use Only
-
Tetrabutylammonium Dihydrogen Phosphate
GFS Chemicals(C4H9)4N(H2PO4) CAS#: 5574-97-0 F.W.: 339.46 99% Crystals